Lets you use your entire hand to grip the gun for better recoil control and more consistent shot placement. Grip Extension does not increase magazine capacity or weight. Extended “shelf” for the little finger attaches in place of the factory magazine base. Makes shooting these little “handfuls” a lot more comfortable.
SPECS: Impact-resistant plastic, black.
Altro...
Aumenta il Controllo del Rinculo per una Maggiore Precisione
Permette di utilizzare l'intera mano per impugnare l'arma, garantendo un migliore controllo del rinculo e una maggiore precisione nel collocamento dei colpi. La Grip Extension non aumenta la capacità del caricatore né il peso. Un 'ripiano' esteso per il mignolo si attacca al posto della base del caricatore di fabbrica. Rende lo sparo con queste piccole 'manate' molto più confortevole.
SPECS: Plastica resistente agli urti, nero.
Altro...
Punteggi dei clienti per PEARCE GRIP SMITH & WESSON M&P SHIELD 9MM/.40 EXTENSION
Numero di punteggi: 8
Da brownells.com: 7
Punteggio medio: 4,5
Non compatibile con Shield Plus(22/06/2024)
BEST GRIP ADD ON IVE FOUD FOR THE M&P SH(21/07/2014)
THE SHIELD IS A CONCEALMENT MADE S&W 9MM..WITH THE GUN BEING MADE AS SMALL AS POSSIBLE THE GUN SHOOTS VERY WELL AND THE RECOIL IS VERY LOW AND VERY EAST TO CONTROL. WHEN I ADDED THE EXTENSION ON IT FELT AS IF I HAD A GRIP PUT ON THAT ALLOWED MY HAND TO GRIP SO MUCH BETTER THAN BEFORE. I HAVE A LARGE FRAME HAND AND MY PINKY FINGER WAS BARELY ON THE GRIP. NOW IT IS PERFECTLY PLACED ON THE GRIP SO MY PINKY ASCTUALLY HOLDS ON AS MUCH AS ANY OTHER FINGER ALLOWING FOR MOREE ACCURATE SHOOTING FASTER SIGHTING BACK ON TARGET AND ALLOWING FOR FAIRLY ACCURATE ONE HANDED SHOOTING WITH HV AMMO. IN THE GUN. ALL AROUND BEST $10.00 IVE SPENT FOR THE GUN..ANYONE WHO DOESNT LIKE THE FEEL OF THE S&W SHIELD NEEDS TO SNAP THIS IN PLACE AND BE WOWED AT THE DIFFERENCE. IT INSTALLS IN 60 SECONDS OR LESS..I WOULD RECCOMEND THIS TO ANYONE WHO OWNS THIS GUN..
Worthwhile upgrade(11/02/2015)
These should come with the factory magazines. It gives you the option to get a full grip on a small handgun without giving up concealability.
They are easy to install and fit well without sharp edges to pinch your hands when reloading.
Easy replacement, good fit and quality!(10/03/2015)
Very easy to install. I did three in less than 10 min.
This should have been OEM(21/03/2015)
S&W should have put these on as standard equipment. Adds just enough extra length to allow a full five finger grip for me. I prefer the feel to that of the 8 round extended grip and the mag doesn't drag on my palm to impede a free drop during a mag change the way the S&W extended mag does. Installation is as easy as it gets.
Preferred add-on for M&P Shield(04/04/2015)
These enable a proper, full grip for most people on the standard magazine without excessive length to compromise the ability conceal the weapon or the sliding spacer issue that the factory +1 magazines have in their standard configuration. Installation is as simple as changing the floor plate during a normal magazine cleaning. As others have said, I don't know why these aren't the standard factory floor plate. Until they are, I'll add them to every one of my standard Shield mags.
Had to file to fit but works great(17/04/2018)
Got it, sliped it on my mag, mag would not lock in gun, removed, filed, sliped back on mag, mag locked in gun. Feels much more comfortable then without it. So in a nutshell it works but had to file to work, no big deal for me.
VASTLY IMPROVES THE HITABILITY! (18/09/2018)
I bought a SHIELD 2.0 in 9mm as a potential replacement for the 5-shot J-frame that I carry as my back-up gun. As a back-up gun, it will be holstered in my front pants pocket. I want to be able to use the 7-shot magazine, but there's no place for my pinky finger. As such, I cannot do good work with the pistol unless I use the 8-shot magazine.
This Pearce grip adapter replaces the factory floor plate in about 5 seconds. It doesn't make the grip any longer, but it creates a horizontal hook/pinky hanger that give my XL-size hand a full 3-finger grip. With this in place, I can do good work.
I like this part so much that I've ordered one for each carry mag and each practice mag. Try it; you'll like it!
N. prodotto: 092000027 PEARCE GRIP SMITH & WESSON M&P SHIELD 9MM/.40 EXTENSION Parti Fabbricante: PGMPS605849700014 Permette di utilizzare l'intera mano per impugnare l'arma, garantendo un migliore controllo del rinculo e una maggiore precisione nel collocamento dei colpi. La Grip Extension non aumenta la capacità del caricatore né il peso. Un 'ripiano' esteso per il mignolo si attacca al posto della base del caricatore di fabbrica. Rende lo sparo con queste piccole 'manate' molto più confortevole.
16.9EUR016,90 €
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: Smith & WessonModello: M&P ShieldTipo: Grip Extenders
La Grip Extension permette una presa completa dell'arma, migliorando il controllo del rinculo e la precisione.
Non aumenta la capacità del caricatore né il peso dell'arma.
È realizzata in plastica resistente agli urti e si attacca al posto della base del caricatore di fabbrica.
Caratteristiche
Adatto per:
Smith & Wesson
Modello:
M&P Shield
Tipo:
Grip Extenders
Peso della spedizione: 0,02kgAltezza di spedizione: 33mmLarghezza di spedizione: 81mmLunghezza di spedizione: 112mm
UPC
: 605849700014
Dettagli dell'elemento
Made in Usa
Classificazione per l'export dagli US: 0A501.x
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Migliora il controllo e la precisione con l'estensione grip per Smith & Wesson M&P Shield 9mm/.40. Scopri il comfort! ✨
Lets you use your entire hand to grip the gun for better recoil control and more consistent shot placement. Grip Extension does not increase magazine capacity or weight. Extended “shelf” for the little finger attaches in place of the factory magazine base. Makes shooting these little “handfuls” a lot more comfortable.
SPECS: Impact-resistant plastic, black.
Altro...
Aumenta il Controllo del Rinculo per una Maggiore Precisione
Permette di utilizzare l'intera mano per impugnare l'arma, garantendo un migliore controllo del rinculo e una maggiore precisione nel collocamento dei colpi. La Grip Extension non aumenta la capacità del caricatore né il peso. Un 'ripiano' esteso per il mignolo si attacca al posto della base del caricatore di fabbrica. Rende lo sparo con queste piccole 'manate' molto più confortevole.
SPECS: Plastica resistente agli urti, nero.
Altro...
Punteggi dei clienti per PEARCE GRIP SMITH & WESSON M&P SHIELD 9MM/.40 EXTENSION
Numero di punteggi: 8
Da brownells.com: 7
Punteggio medio: 4,5
Non compatibile con Shield Plus(22/06/2024)
BEST GRIP ADD ON IVE FOUD FOR THE M&P SH(21/07/2014)
THE SHIELD IS A CONCEALMENT MADE S&W 9MM..WITH THE GUN BEING MADE AS SMALL AS POSSIBLE THE GUN SHOOTS VERY WELL AND THE RECOIL IS VERY LOW AND VERY EAST TO CONTROL. WHEN I ADDED THE EXTENSION ON IT FELT AS IF I HAD A GRIP PUT ON THAT ALLOWED MY HAND TO GRIP SO MUCH BETTER THAN BEFORE. I HAVE A LARGE FRAME HAND AND MY PINKY FINGER WAS BARELY ON THE GRIP. NOW IT IS PERFECTLY PLACED ON THE GRIP SO MY PINKY ASCTUALLY HOLDS ON AS MUCH AS ANY OTHER FINGER ALLOWING FOR MOREE ACCURATE SHOOTING FASTER SIGHTING BACK ON TARGET AND ALLOWING FOR FAIRLY ACCURATE ONE HANDED SHOOTING WITH HV AMMO. IN THE GUN. ALL AROUND BEST $10.00 IVE SPENT FOR THE GUN..ANYONE WHO DOESNT LIKE THE FEEL OF THE S&W SHIELD NEEDS TO SNAP THIS IN PLACE AND BE WOWED AT THE DIFFERENCE. IT INSTALLS IN 60 SECONDS OR LESS..I WOULD RECCOMEND THIS TO ANYONE WHO OWNS THIS GUN..
Worthwhile upgrade(11/02/2015)
These should come with the factory magazines. It gives you the option to get a full grip on a small handgun without giving up concealability.
They are easy to install and fit well without sharp edges to pinch your hands when reloading.
Easy replacement, good fit and quality!(10/03/2015)
Very easy to install. I did three in less than 10 min.
This should have been OEM(21/03/2015)
S&W should have put these on as standard equipment. Adds just enough extra length to allow a full five finger grip for me. I prefer the feel to that of the 8 round extended grip and the mag doesn't drag on my palm to impede a free drop during a mag change the way the S&W extended mag does. Installation is as easy as it gets.
Preferred add-on for M&P Shield(04/04/2015)
These enable a proper, full grip for most people on the standard magazine without excessive length to compromise the ability conceal the weapon or the sliding spacer issue that the factory +1 magazines have in their standard configuration. Installation is as simple as changing the floor plate during a normal magazine cleaning. As others have said, I don't know why these aren't the standard factory floor plate. Until they are, I'll add them to every one of my standard Shield mags.
Had to file to fit but works great(17/04/2018)
Got it, sliped it on my mag, mag would not lock in gun, removed, filed, sliped back on mag, mag locked in gun. Feels much more comfortable then without it. So in a nutshell it works but had to file to work, no big deal for me.
VASTLY IMPROVES THE HITABILITY! (18/09/2018)
I bought a SHIELD 2.0 in 9mm as a potential replacement for the 5-shot J-frame that I carry as my back-up gun. As a back-up gun, it will be holstered in my front pants pocket. I want to be able to use the 7-shot magazine, but there's no place for my pinky finger. As such, I cannot do good work with the pistol unless I use the 8-shot magazine.
This Pearce grip adapter replaces the factory floor plate in about 5 seconds. It doesn't make the grip any longer, but it creates a horizontal hook/pinky hanger that give my XL-size hand a full 3-finger grip. With this in place, I can do good work.
I like this part so much that I've ordered one for each carry mag and each practice mag. Try it; you'll like it!