Eliminates "Fitting" The Safety; Works With Factory & Aftermarket Triggers
Easy-to-install, reversible safety selector ensures ultra-reliable engagement and eliminates the time-consuming job of “fitting the safety” to a factory or aftermarket trigger—the perfect upgrade to accompany a J.P. Enterprises Adjustable Trigger. Eliminates the risk of damaging the trigger during fitting and shortens installation time by as much as one-third. An adjustment screw on the selector drum lets you quickly and easily set the correct trigger/safety relationship to completely block trigger movement when the selector is set to “safe.” A second screw inside the drum ensures the adjustment screw stays locked in place. Deeply grooved control pad gives positive thumb engagement even when wearing gloves, and can be installed in the standard position on the left-side of the receiver or on the right side for fast, natural operation by left-handed shooters. Includes a low-profile ambidextrous lever for the other side that adds minimal bulk while giving you the flexibility to operate the safety with the off hand in an emergency or if the strong hand is injured. Or add the JPFC-SL1 Ambidextrous Selector Lever to give your rifle a full-size safety lever on both sides of the receiver for fully ambidextrous operation. Ideal for tactical and competition shooters who may need to operate the selector with the weak hand to accommodate an unconventional shooting position.
SPECS: Steel with aluminum control pads, matte black finish. Installation instructions included.
Altro...
Elimina la Necessità di "Adattare" la Sicurezza; Compatibile con Grilletti di Fabbrica e Aftermarket
Facile da installare, il selettore di sicurezza reversibile garantisce un ingaggio ultra-affidabile ed elimina il lavoro dispendioso di "adattare la sicurezza" a un grilletto di fabbrica o aftermarket—l'upgrade perfetto da abbinare a un Grilletto Regolabile J.P. Enterprises. Elimina il rischio di danneggiare il grilletto durante l'adattamento e riduce il tempo di installazione fino a un terzo. Una vite di regolazione sul tamburo del selettore permette di impostare rapidamente e facilmente il corretto rapporto grilletto/sicurezza per bloccare completamente il movimento del grilletto quando il selettore è impostato su "sicuro". Una seconda vite all'interno del tamburo assicura che la vite di regolazione rimanga bloccata in posizione. Il pad di controllo con profonde scanalature garantisce un ingaggio positivo del pollice anche indossando guanti, e può essere installato nella posizione standard sul lato sinistro del ricevitore o sul lato destro per un'operazione rapida e naturale da parte di tiratori mancini. Include una leva ambidestra a basso profilo per l'altro lato che aggiunge il minimo ingombro pur offrendo la flessibilità di operare la sicurezza con la mano non dominante in caso di emergenza o se la mano forte è infortunata. Oppure aggiungi la leva selettore ambidestra JPFC-SL1 per dotare il tuo fucile di una leva di sicurezza a grandezza naturale su entrambi i lati del ricevitore per un funzionamento completamente ambidestro. Ideale per tiratori tattici e di competizione che potrebbero aver bisogno di operare il selettore con la mano debole per adattarsi a una posizione di tiro non convenzionale.
SPECS: Acciaio con pad di controllo in alluminio, finitura opaca nera. Istruzioni per l'installazione incluse.
Altro...
Punteggi dei clienti per J P ENTERPRISES ADJUSTABLE/REVERSIBLE SELECTOR
Numero di punteggi: 8
Da brownells.com: 8
Punteggio medio: 4,1
ABSOLUTE PERFECTION(24/02/2010)
JP Enterprises hit one out of the park with this safety selector! Being a gunsmith and working with quality parts is a pleasure. I found that the instructions very easy to follow and little fitting required. Having a selector that is adjustable removes all play when on safe, giving a rock solid feel.The thumb rest is deeper and has a shelf for no miss or slip engagement.Being screwed from both sides makes it a tight fit.
Excellent, when it fits your trigger(27/10/2010)
I installed this about a year ago when all my other internal lower parts were standard (including the trigger) and it worked perfectly. Easy installation, very nice machining (no sloppiness or excessive depth of the detent groove as you will sometimes see with a standard part) which makes for excellent, smooth feel and safety engagement/disengagement (as well as quietness). No fitting was required other than adjusting one screw. I was excited to have an ambi safety, since I am left handed, and liked that it was advertised as working with "any aftermarket trigger" (I'm quoting from their website, here), as I planned to install one down the road.
After a few months of AR bliss I decided to install a Geiselle SSA trigger. I installed the trigger, cocked the rifle, switched the selector to "fire," pulled the trigger, and nothing... I swapped the JP selector for a standard one, and the trigger worked beautifully. Switching back to the JP and watching the trigger movement, I noticed that the JP was not allowing the Geissele to travel enough to release the hammer. The tail of the trigger was hitting the safety before the sear could release. This is how the safety is supposed to work when it is engaged in "safe" mode. So in effect, with this safety I effectively get "safe" mode when the selector was switched to both "safe" and "fire" modes. Pulling the safety again and visually comparing it to the standard, I could see that the JP's machined flat for "fire" was significantly shallower than the standard safety's. The difference is on the order of a couple mm, which is huge considering that this part isn't very large. It is clear that they did this because there is a transverse hole drilled in the thing (for the adjustable "safe" mode stop). I guess the designers were concerned that if they machined the thing to standard dimensions that it would be too weak.
So I'm back to using the standard safety for the moment so I can actually fire my rifle. I've been thinking about machining or filing down the "fire" shelf some to see if I can make enough room for the trigger to work, but I'm not sure if that's such a good idea. It might not have enough meat there before hitting the screw hole. I'm probably going to try some competing offerings before I resort to that.
I just don't see how they can claim that the thing works with all aftermarket triggers when it clearly has a travel limitation that the standard design does not. It does not work with the Geissele SSA, anyway.
This item DOES NOT WORK(10/03/2011)
Upon visual inspection, it is obvious to the naked eye that the gap in the barrel is much more shallow than on a stock selector. After installing it, my Wilson Combat tac trigger would not fire. Even with the adjustment screws removed alltogether, the trigger bar would not clear the selector when on FIRE. Given the divergence from USGI selector barrel specs, I would not trust this item with any trigger.
Excellent Product as always(28/03/2011)
Being a full time gunsmith, this unit is absolute perfection when it comes to perfectly adjusting the safety engagement on an AR. I have installed several and customers are happy with them. Satisfied customers is what it is all about.
Works as advertised(15/07/2011)
Drop in and adjust works like a charm. Fits like manufacture says. My only complaint is if you set it up with the ambi safety it rubs my trigger finger, not a big deal i just removed it.
Needed for JP Fire Control Group(02/04/2013)
It's a good safety, but I had to buy it because the JP fire control group I installed on my S&W wouldn't work with the Battle arms ambi safety or a standard safety for that matter. Whereas others where having issues with the FIRE position, I couldn't engage a standard safety with the JP trigger without binding/rubbing, so I had to install this one. This safety barrel is cut out in the safe position and uses a set-screw to contact the trigger. Overall happy with it, but really wouldn't recommend it over anything else UNLESS you run into issues with your JP trigger and need more clearance in the SAFE position.
Yay! It worked!!!(18/07/2013)
I just got done installing both the JP selector in a Stag Arms Lower with Geissele SSA trigger and the Battle Arms selector in a Colt Lower with a Geissele SSA-E trigger. Both selectors are fine pieces of equipment to be sure but there are differences. Out of the box with no break-in period the JP was smother from stop to stop. Both have about the same positive click feel when reaching Safe or Fire. I think the BA selector will become just as smooth when the finish coating wears some though. Again, out of the box and with no gunsmithing the BA was a better fit with the Geissele trigger. To be completely fair to JP though, in my opinion they are providing a product that is designed to provide a more custom precision fit and also that in Geissele's own product description they say that some selectors will need to be fitted with their triggers. The Stag Arms Lower/SSA combo with the JP Selector had no perceivable over-travel when fired. Translation, I got darn lucky that it worked out of the box and it might be a good idea to take it to a gunsmith for a more proper fit. The adjustable safety block screw did interface nicely with the SSA though. If you are looking for a more custom fit/feel for your AR and don't mind having to possibly do some added work for it the JP Enterprises Selector, in my nonprofessional opinion, is the better part. With the Battle Arms selector though, drop it in, Loctite two screw and you're done.
Single Stage only (28/10/2015)
This is an awesome unit - I like the interface between the levers and the barrel much more than the Battle Arms system, and the machining is tighter, however, as it comes from JPE, it is designed to ONLY work with single stage triggers - and I already Geissele'd all the things. There's not enough metal taken off of the 'fire' surface to allow the trigger body's movement in a second stage pull. I spoke with a rep at JP, who advised it's possible to machine the 'fire' interface surface back to allow more travel for two stage triggers. The rep thought it might be around .010" +/- .005"
N. prodotto: 452000043 J P ENTERPRISES ADJUSTABLE/REVERSIBLE SELECTOR Parti Fabbricante: JPFC-SA812872022116 Facile da installare, il selettore di sicurezza reversibile garantisce un ingaggio ultra-affidabile ed elimina il lavoro dispendioso di "adattare la sicurezza" a un grilletto di fabbrica o aftermarket—l'upgrade perfetto da abbinare a un Grilletto Regolabile J.P. Enterprises. Elimina il rischio di danneggiare il grilletto durante l'adattamento e riduce il tempo di installazione fino a un terzo. Una vite di regolazione sul tamburo del selettore permette di impostare rapidamente e facilmente il corretto rapporto grilletto/sicurezza per bloccare completamente il movimento del grilletto quando il selettore è impostato su "sicuro". Una seconda vite all'interno del tamburo assicura che la vite di regolazione rimanga bloccata in posizione. Il pad di controllo con profonde scanalature garantisce un ingaggio positivo del pollice anche indossando guanti, e può essere installato nella posizione standard sul lato sinistro del ricevitore o sul lato destro per un'operazione rapida e naturale da parte di tiratori mancini. Include una leva ambidestra a basso profilo per l'altro lato che aggiunge il minimo ingombro pur offrendo la flessibilità di operare la sicurezza con la mano non dominante in caso di emergenza o se la mano forte è infortunata. Oppure aggiungi la leva selettore ambidestra JPFC-SL1 per dotare il tuo fucile di una leva di sicurezza a grandezza naturale su entrambi i lati del ricevitore per un funzionamento completamente ambidestro. Ideale per tiratori tattici e di competizione che potrebbero aver bisogno di operare il selettore con la mano debole per adattarsi a una posizione di tiro non convenzionale.
134.9EUR3134,90 €
*
Tempi di consegna circa 12-16 giorni. 3 pz. nel magazzino USA
Il selettore di sicurezza reversibile e ambidestro di J P ENTERPRISES è facile da installare e garantisce un ingaggio ultra-affidabile, riducendo il tempo di installazione fino a un terzo.
Include una leva ambidestra a basso profilo e offre l'opzione di aggiungere una leva di sicurezza a grandezza naturale su entrambi i lati per un funzionamento completamente ambidestro.
Realizzato in acciaio con un pad di controllo in alluminio, è ideale per tiratori tattici e di competizione, con istruzioni per l'installazione incluse.
Caratteristiche
Adatto per:
AR-15
Peso della spedizione: 0,005kgLarghezza di spedizione: 83mmLunghezza di spedizione: 146mm
UPC
: 812872022116
Dettagli dell'elemento
Made in Usa
Classificazione per l'export dagli US: 0A501.x
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Scopri il selettore di sicurezza AR-15 ambidestro di J.P. Enterprises. 🔧 Facile da installare e perfetto per tiratori di ogni livello!
Eliminates "Fitting" The Safety; Works With Factory & Aftermarket Triggers
Easy-to-install, reversible safety selector ensures ultra-reliable engagement and eliminates the time-consuming job of “fitting the safety” to a factory or aftermarket trigger—the perfect upgrade to accompany a J.P. Enterprises Adjustable Trigger. Eliminates the risk of damaging the trigger during fitting and shortens installation time by as much as one-third. An adjustment screw on the selector drum lets you quickly and easily set the correct trigger/safety relationship to completely block trigger movement when the selector is set to “safe.” A second screw inside the drum ensures the adjustment screw stays locked in place. Deeply grooved control pad gives positive thumb engagement even when wearing gloves, and can be installed in the standard position on the left-side of the receiver or on the right side for fast, natural operation by left-handed shooters. Includes a low-profile ambidextrous lever for the other side that adds minimal bulk while giving you the flexibility to operate the safety with the off hand in an emergency or if the strong hand is injured. Or add the JPFC-SL1 Ambidextrous Selector Lever to give your rifle a full-size safety lever on both sides of the receiver for fully ambidextrous operation. Ideal for tactical and competition shooters who may need to operate the selector with the weak hand to accommodate an unconventional shooting position.
SPECS: Steel with aluminum control pads, matte black finish. Installation instructions included.
Altro...
Elimina la Necessità di "Adattare" la Sicurezza; Compatibile con Grilletti di Fabbrica e Aftermarket
Facile da installare, il selettore di sicurezza reversibile garantisce un ingaggio ultra-affidabile ed elimina il lavoro dispendioso di "adattare la sicurezza" a un grilletto di fabbrica o aftermarket—l'upgrade perfetto da abbinare a un Grilletto Regolabile J.P. Enterprises. Elimina il rischio di danneggiare il grilletto durante l'adattamento e riduce il tempo di installazione fino a un terzo. Una vite di regolazione sul tamburo del selettore permette di impostare rapidamente e facilmente il corretto rapporto grilletto/sicurezza per bloccare completamente il movimento del grilletto quando il selettore è impostato su "sicuro". Una seconda vite all'interno del tamburo assicura che la vite di regolazione rimanga bloccata in posizione. Il pad di controllo con profonde scanalature garantisce un ingaggio positivo del pollice anche indossando guanti, e può essere installato nella posizione standard sul lato sinistro del ricevitore o sul lato destro per un'operazione rapida e naturale da parte di tiratori mancini. Include una leva ambidestra a basso profilo per l'altro lato che aggiunge il minimo ingombro pur offrendo la flessibilità di operare la sicurezza con la mano non dominante in caso di emergenza o se la mano forte è infortunata. Oppure aggiungi la leva selettore ambidestra JPFC-SL1 per dotare il tuo fucile di una leva di sicurezza a grandezza naturale su entrambi i lati del ricevitore per un funzionamento completamente ambidestro. Ideale per tiratori tattici e di competizione che potrebbero aver bisogno di operare il selettore con la mano debole per adattarsi a una posizione di tiro non convenzionale.
SPECS: Acciaio con pad di controllo in alluminio, finitura opaca nera. Istruzioni per l'installazione incluse.
Altro...
Punteggi dei clienti per J P ENTERPRISES ADJUSTABLE/REVERSIBLE SELECTOR
Numero di punteggi: 8
Da brownells.com: 8
Punteggio medio: 4,1
ABSOLUTE PERFECTION(24/02/2010)
JP Enterprises hit one out of the park with this safety selector! Being a gunsmith and working with quality parts is a pleasure. I found that the instructions very easy to follow and little fitting required. Having a selector that is adjustable removes all play when on safe, giving a rock solid feel.The thumb rest is deeper and has a shelf for no miss or slip engagement.Being screwed from both sides makes it a tight fit.
Excellent, when it fits your trigger(27/10/2010)
I installed this about a year ago when all my other internal lower parts were standard (including the trigger) and it worked perfectly. Easy installation, very nice machining (no sloppiness or excessive depth of the detent groove as you will sometimes see with a standard part) which makes for excellent, smooth feel and safety engagement/disengagement (as well as quietness). No fitting was required other than adjusting one screw. I was excited to have an ambi safety, since I am left handed, and liked that it was advertised as working with "any aftermarket trigger" (I'm quoting from their website, here), as I planned to install one down the road.
After a few months of AR bliss I decided to install a Geiselle SSA trigger. I installed the trigger, cocked the rifle, switched the selector to "fire," pulled the trigger, and nothing... I swapped the JP selector for a standard one, and the trigger worked beautifully. Switching back to the JP and watching the trigger movement, I noticed that the JP was not allowing the Geissele to travel enough to release the hammer. The tail of the trigger was hitting the safety before the sear could release. This is how the safety is supposed to work when it is engaged in "safe" mode. So in effect, with this safety I effectively get "safe" mode when the selector was switched to both "safe" and "fire" modes. Pulling the safety again and visually comparing it to the standard, I could see that the JP's machined flat for "fire" was significantly shallower than the standard safety's. The difference is on the order of a couple mm, which is huge considering that this part isn't very large. It is clear that they did this because there is a transverse hole drilled in the thing (for the adjustable "safe" mode stop). I guess the designers were concerned that if they machined the thing to standard dimensions that it would be too weak.
So I'm back to using the standard safety for the moment so I can actually fire my rifle. I've been thinking about machining or filing down the "fire" shelf some to see if I can make enough room for the trigger to work, but I'm not sure if that's such a good idea. It might not have enough meat there before hitting the screw hole. I'm probably going to try some competing offerings before I resort to that.
I just don't see how they can claim that the thing works with all aftermarket triggers when it clearly has a travel limitation that the standard design does not. It does not work with the Geissele SSA, anyway.
This item DOES NOT WORK(10/03/2011)
Upon visual inspection, it is obvious to the naked eye that the gap in the barrel is much more shallow than on a stock selector. After installing it, my Wilson Combat tac trigger would not fire. Even with the adjustment screws removed alltogether, the trigger bar would not clear the selector when on FIRE. Given the divergence from USGI selector barrel specs, I would not trust this item with any trigger.
Excellent Product as always(28/03/2011)
Being a full time gunsmith, this unit is absolute perfection when it comes to perfectly adjusting the safety engagement on an AR. I have installed several and customers are happy with them. Satisfied customers is what it is all about.
Works as advertised(15/07/2011)
Drop in and adjust works like a charm. Fits like manufacture says. My only complaint is if you set it up with the ambi safety it rubs my trigger finger, not a big deal i just removed it.
Needed for JP Fire Control Group(02/04/2013)
It's a good safety, but I had to buy it because the JP fire control group I installed on my S&W wouldn't work with the Battle arms ambi safety or a standard safety for that matter. Whereas others where having issues with the FIRE position, I couldn't engage a standard safety with the JP trigger without binding/rubbing, so I had to install this one. This safety barrel is cut out in the safe position and uses a set-screw to contact the trigger. Overall happy with it, but really wouldn't recommend it over anything else UNLESS you run into issues with your JP trigger and need more clearance in the SAFE position.
Yay! It worked!!!(18/07/2013)
I just got done installing both the JP selector in a Stag Arms Lower with Geissele SSA trigger and the Battle Arms selector in a Colt Lower with a Geissele SSA-E trigger. Both selectors are fine pieces of equipment to be sure but there are differences. Out of the box with no break-in period the JP was smother from stop to stop. Both have about the same positive click feel when reaching Safe or Fire. I think the BA selector will become just as smooth when the finish coating wears some though. Again, out of the box and with no gunsmithing the BA was a better fit with the Geissele trigger. To be completely fair to JP though, in my opinion they are providing a product that is designed to provide a more custom precision fit and also that in Geissele's own product description they say that some selectors will need to be fitted with their triggers. The Stag Arms Lower/SSA combo with the JP Selector had no perceivable over-travel when fired. Translation, I got darn lucky that it worked out of the box and it might be a good idea to take it to a gunsmith for a more proper fit. The adjustable safety block screw did interface nicely with the SSA though. If you are looking for a more custom fit/feel for your AR and don't mind having to possibly do some added work for it the JP Enterprises Selector, in my nonprofessional opinion, is the better part. With the Battle Arms selector though, drop it in, Loctite two screw and you're done.
Single Stage only (28/10/2015)
This is an awesome unit - I like the interface between the levers and the barrel much more than the Battle Arms system, and the machining is tighter, however, as it comes from JPE, it is designed to ONLY work with single stage triggers - and I already Geissele'd all the things. There's not enough metal taken off of the 'fire' surface to allow the trigger body's movement in a second stage pull. I spoke with a rep at JP, who advised it's possible to machine the 'fire' interface surface back to allow more travel for two stage triggers. The rep thought it might be around .010" +/- .005"
Aiuto e contatti
(0) 
Newsletter
Visualizzazione classica
Visualizzazione mobile