The Sinclair Two-Piece bore guide system helps the shooter get the best possible alignment of the cleaning rod to the bore by using a guide within a guide. The guide body goes into the action and seals the chamber with an O-ring, like a traditional bore guide. A separate guide slides into the rear of the guide body to provide a slip fit for the cleaning rod. The tight-fitting 8" insert prevents the rod from flexing and keeps it centered, so it will not contact the rifling while you clean. Choose the guide body to fit the cartridge your rifle is chambered for, then select the insert with the inside diameter that fits your rod. Both guide body and insert are machined from Delrin with rubber O-ring seals to prevent solvent from getting into the action. Bore guide bodies are made to fit the Remington 700 and other rifles with .700" diameter bolts. Inserts Sold Separately
Il sistema di guida per canna a due pezzi Sinclair aiuta il tiratore a ottenere il miglior allineamento possibile della bacchetta di pulizia con la canna utilizzando una guida all'interno di un'altra guida. Il corpo della guida si inserisce nell'azione e sigilla la camera con un O-ring, proprio come una guida per canna tradizionale. Una guida separata scivola nella parte posteriore del corpo della guida per fornire una vestibilità scorrevole per la bacchetta di pulizia. L'inserto di 8" a misura stretta impedisce alla bacchetta di flettersi e la mantiene centrata, in modo che non entri in contatto con le rigature mentre pulisci. Scegli il corpo della guida in base alla cartuccia per cui il tuo fucile è camerato, quindi seleziona l'inserto con il diametro interno che si adatta alla tua bacchetta. Sia il corpo della guida che l'inserto sono fresati in Delrin con guarnizioni in O-ring di gomma per prevenire l'ingresso di solventi nell'azione. I corpi delle guide per canna sono realizzati per adattarsi al Remington 700 e ad altri fucili con bulloni di diametro .700".