Il Carrello è vuoto.

Carrello

Aiuto e contatti

Reso facile

Newsletter

Offerte

Oltre 300.000 clienti - vi ringraziamo!

4,93/5 "Molto buono" (1400+ recensioni)

Oltre 40.000 prodotti per caccia e sport di tiro

NIGHTHAWK CUSTOM
1911 MAINSPRING HOUSING

080683000283 100003233

Fully Checkered For A Firm, Nonslip Grip

Get a solid grip on your Govt. or Officers Model with the crisp, clean 25 lpi machine-cut checkering on these all-steel mainspring housings. Helps improved accuracy by keeping the pistol correctly positioned in the shooting hand for a consistent hold and improves recoil control. Great for combat or competition pistols. Flat (FL) model offers a clean, low profile that lets you get a good, solid grip. Arched (AR) has the bump or rounded swell toward the bottom of the housing that aids in maintaining a higher grip.

Altro...

Completamente Zigrinato per una Presa Ferma e Antiscivolo

Assicurati una presa solida sulla tua Govt. o Officers Model con l'incisione a scacchiera precisa e pulita da 25 lpi su queste carcasse del mainspring interamente in acciaio. Aiuta a migliorare la precisione mantenendo la pistola correttamente posizionata nella mano di tiro per una presa costante e migliora il controllo del rinculo. Ottimo per pistole da combattimento o competizione. Il modello Flat (FL) offre un profilo basso e pulito che ti permette di ottenere una presa solida e sicura. Il modello Arched (AR) presenta una curvatura o gonfiore arrotondato verso il fondo della carcassa che aiuta a mantenere una presa più alta.

Altro...

Punteggi dei clienti per NIGHTHAWK CUSTOM 1911 GOVT. FLAT MAINSPRING HOUSING

Numero di punteggi: 9
Da brownells.com: 9
Punteggio medio: 5

Well worth the extra money! (06/09/2011)

I bought one of these from Nighthawk before they were offered here.These dropped right into my springfield and caspian frames.A little stone work was needed on my Ed Brown grip safety as it was rubbing ever so slightly.Very nice fit and finish.You wont find a better magwell.

excellent part (03/04/2014)

this part is awesome. it looks good, fitment is VERY good, helps with my reloads, etc.

i replaced the ILS on my SA LW Champion Operator with this and there's a few things:

first, i thought the one i ordered was going to be a gunsmith fit, if it was, it didn't need fitting. the fitment is 99% perfect, and the only way to fix the 1% left would be to weld the part so it can be filed down.

second, the edge of the magwell doesn't leave a lip on the frame. i will likely blend the magwell to the frame, but i don't NEED to, that's just asthetics.

third, it doesn't protrude as much as i was thinking it would. i have this mounted on my EDC gun, and it doesn't print any more than before.

overall, i really like this product, and will likely order another one for the next 1911

this also works very well with Chip McCormick magazines, Wilson Combat magazines, and Tripp Research magazines, as well as SIG, Nighthawk, and Kimber magazines.
10 round or 8.

Awsome (10/03/2012)

After reading the last review on brownells about this product I was a little nervious about getting it. I have had many NHC products and can say they have always been top notch and after installing I got to say I am totally impressed. Fit and quality we outstanding and was very easy to install. NHC again hats off to you for a great product.

Totally awesome product here. (30/03/2012)

Fit pistol perfectly and took very little time to get a gap free fit on the bottom. Any "gunsmith" worth his bluing salts would know that any 1911 frame is a mixed bag when it comes to these housings. It has very nice machine checkering as well. It was nice to not have to go over the checkering like I do with every cheap, cast magwell that people love so much. It is a bit pricey.

FLUSH FIT ON DAN WESSON SPECIALIST (25/07/2015)

Flush fit on Dan Wesson Specialist. Dan Wesson original magazine well guide continually came loose. Nighthawk part solves this problem. Nighthawk magazine well is cut at a more efficient angle than Dan Wesson factory part. Less weight on the Nighthawk part appears to have improved overall balance of pistol during drawing from holster and presenting. Only CON, minor fitting to remove small material burr inside pin hole of part.

Great Mainspring Housing (28/09/2012)

Housing fits up and has correct depth on Colt Government 1991. Checkering is crip and clean.
Nothing bad to say - works perfect, great quality.

First Class Part (21/12/2012)

This part dropped in to my Kimber TLE II with great ease and no fitting. It looks like it was made with my gun, and feels great in the hand. Finish and cuts are excellent. Very well made part.

Excellent Part (14/03/2013)

Bought two of these to replace the curved mainspring housings on a couple of Girsan 1911s. Dropped right in with no fitting. Excellent fit. They look beautiful on the pistols and very much improve the grip and point of the pistols for my medium-sized hands. Nice checkering, very well-made. Easy to install. Allows proper engagement of the grip safety with no fitting. Highly recommend.

Great Product (03/04/2015)

Just installed this on a Colt Combat Commander. Some minor fitting, a couple needle files & stoning, no big deal. Looks & handles great. I've got a couple Norincos I've had for some time. Going to get the same treatment.

Leggi più recensioni su brownells.com

99.9 99.9 1 EUR

N. prodotto: 100003233
NIGHTHAWK CUSTOM 1911 GOVT. FLAT MAINSPRING HOUSING
Parti Fabbricante: SP0227 080683000283 Assicurati una presa solida sulla tua Govt. o Officers Model con l'incisione a scacchiera precisa e pulita da 25 lpi su queste carcasse del mainspring interamente in acciaio. Aiuta a migliorare la precisione mantenendo la pistola correttamente posizionata nella mano di tiro per una presa costante e migliora il controllo del rinculo. Ottimo per pistole da combattimento o competizione. Il modello Flat (FL) offre un profilo basso e pulito che ti permette di ottenere una presa solida e sicura. Il modello Arched (AR) presenta una curvatura o gonfiore arrotondato verso il fondo della carcassa che aiuta a mantenere una presa più alta.

99.9 EUR 3 99,90 € *

Tempi di consegna circa 12-16 giorni.
3 pz. nel magazzino USA

Caratteristiche: Adatto per: 1911 Finitura: Blued Modello: Government, Commander

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Top takeaways

Il mainspring housing in acciaio con incisione a scacchiera da 25 lpi assicura una presa solida e migliora la precisione e il controllo del rinculo.
Disponibile in due modelli: Flat (FL) per un profilo basso e pulito e Arched (AR) per una presa più alta.
Adatto per modelli 1911 Government e Commander, con finitura Blued, ideale per pistole da combattimento o competizione.

Caratteristiche

Adatto per: 1911 Finitura: Blued Modello: Commander,Government Peso della spedizione: 0,054kg Larghezza di spedizione: 83mm Lunghezza di spedizione: 146mm UPC : 080683000283

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.y.1

Migliora la tua presa con il mainspring housing Nighthawk Custom 1911. 🔥 Design flat per precisione e controllo superiori in competizione!

Fully Checkered For A Firm, Nonslip Grip

Altro...

Completamente Zigrinato per una Presa Ferma e Antiscivolo

Altro...

Punteggi dei clienti per NIGHTHAWK CUSTOM 1911 GOVT. FLAT MAINSPRING HOUSING

Numero di punteggi: 9
Da brownells.com: 9
Punteggio medio: 5

Well worth the extra money! (06/09/2011)

excellent part (03/04/2014)

Awsome (10/03/2012)

Totally awesome product here. (30/03/2012)

FLUSH FIT ON DAN WESSON SPECIALIST (25/07/2015)

Great Mainspring Housing (28/09/2012)

Housing fits up and has correct depth on Colt Government 1991. Checkering is crip and clean.
Nothing bad to say - works perfect, great quality.

First Class Part (21/12/2012)

This part dropped in to my Kimber TLE II with great ease and no fitting. It looks like it was made with my gun, and feels great in the hand. Finish and cuts are excellent. Very well made part.

Excellent Part (14/03/2013)