Oltre 300.000 clienti - vi ringraziamo!

Oltre 40.000 prodotti per caccia e sport di tiro

Scopri il set di calci in legno per Winchester 94 Pre-'64. 🌳 Legno di qualità, pronto per la finitura e facile da montare!
  • WOOD PLUS WINCHESTER 94 PRE-'64 STOCK SET
  • WOOD PLUS WINCHESTER 94 PRE-'64 STOCK SET

WOOD PLUS WINCHESTER 94 PRE-'64 STOCK SET (UNFINISHED) - WOOD PLUS WINCHESTER 94 PRE-'64 STOCK SET

984110094

Top takeaways

  1. Il set di calci Winchester 94 Pre-'64 è realizzato in noce classico con venatura dritta, simile agli originali di fabbrica.
  2. Il prodotto è sagomato al 95%, facilitando il montaggio sull'azione Winchester 94 Pre-'64 e pronto per la levigatura finale, tintura e finitura.
  3. Compatibile con l'hardware originale, è adatto ai modelli carabina Winchester 94 Pre-'64.

Caratteristiche

  • Colore: Semilavorata
  • Materiale: Wood
  • Modello: 94
  • Tipo: Fisso
  • Tipo di arma: Winchester
  • Peso della spedizione: 0,794kg
  • Altezza di spedizione: 69mm
  • Larghezza di spedizione: 137mm
  • Lunghezza di spedizione: 457mm

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.y.1
  • Specifiche:
  • Adatto per: Winchester
  • Colore: Semilavorata
  • Materiale: Wood
  • Modello: 94
  • Tipo: Fisso
169.9 169.9 1 EUR
169.9 EUR 169,90 €

Tutti i prezzi sono comprensivi di Iva e oneri di importazione. Sono esclusi i costi di spedizione che verranno indicati nella procedura d'ordine.
P.IVA  C.F. IT02801420981

N. prodotto: 984110094

N. fab.: NONE

Il classico noce offre una corrispondenza ravvicinata con i calci originali di fabbrica. Legno di alta qualità, presenta un motivo a grana dritta. 95% pre-inserito per un facile adattamento alla tua azione. Pronto per la levigatura finale, la tinta e la finitura.
In magazzino
1
2
3
4
5
6
7
8
9
10+
  • Specifiche:
  • Adatto per: Winchester
  • Colore: Semilavorata
  • Materiale: Wood
  • Modello: 94
  • Tipo: Fisso

Descrizione:

Mostra originale (inglese)
Vero Noce per Sostituzione e Restauro
Il classico noce offre una corrispondenza ravvicinata con i calci originali di fabbrica. Legno di alta qualità, presenta un motivo a grana dritta. 95% pre-inserito per un facile adattamento alla tua azione. Pronto per la levigatura finale, la tinta e la finitura.

SPECS: Noce, grana dritta, senza figura. Accetta l'hardware originale. Win. 94 Pre '64 si adatta ai modelli carabina.

Top takeaways

  1. Il set di calci Winchester 94 Pre-'64 è realizzato in noce classico con venatura dritta, simile agli originali di fabbrica.
  2. Il prodotto è sagomato al 95%, facilitando il montaggio sull'azione Winchester 94 Pre-'64 e pronto per la levigatura finale, tintura e finitura.
  3. Compatibile con l'hardware originale, è adatto ai modelli carabina Winchester 94 Pre-'64.

Caratteristiche

  • Colore: Semilavorata
  • Materiale: Wood
  • Modello: 94
  • Tipo: Fisso
  • Tipo di arma: Winchester
  • Peso della spedizione: 0,794kg
  • Altezza di spedizione: 69mm
  • Larghezza di spedizione: 137mm
  • Lunghezza di spedizione: 457mm

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.y.1

Recensioni dei clienti

Valutazioni dei clienti (1)

5 / 5
Assolutamente raccomandato

Brownells USA Pre 64 model 94 Winchester stock set 11/12/2015

I purchased one of these sets from another supplier for a much higher price. It was for one of two restorations I am working on. It is not a project for impatient people. It requires a good bit of fitting and attention to detail. That being said, with some patience and thinking before acting, it will come out as good, or better than the factory furniture. I removed the old furniture and started setting the individual pieces in place for test fitting. I used a fine scribe to mark the edges of the metal. After removing the marked wood, I used an orbital sander with 80 grit paper to remove the major portion of the excess on the forearm. I then used the same orbital sander with 100 grit until the lines were barely visible and finally 150 grit until the stock was smooth. I used fine metal files to trim the projections for the receiver recesses. After a number of fittings, the forearm had a better fit and appearance than the original. I did the same procedure for the stock. The only difference was that I placed the buttplate in position and screwed it in prior to marking the stock. I hand sanded the pieces with 220 grit after the last test fit The best advice I can give is be patient, take your time and think before you act. I will be purchasing my second one from Brownells.

Lo sapevi?

Informazioni sul produttore

Operatore economico responsabile secondo il regolamento UE

Brownells
Via Mezzavilla 4
25043 Breno
Italia
service@brownells.it

Ops! Qualcosa è andato storto.

Si è verificato un errore durante il caricamento di questo contenuto. Aggiorna la pagina per continuare. Se il problema persiste, contatta il nostro servizio clienti.

Torna all'inizio