Il Carrello è vuoto.

Carrello

Aiuto e contatti

Reso facile

Newsletter

Offerte

Oltre 300.000 clienti - vi ringraziamo!

4,93/5 "Molto buono" (1400+ recensioni)

Oltre 40.000 prodotti per caccia e sport di tiro

FORSTER PRODUCTS, INC.
ULTRA™ MICROMETER SEATER DIES

757253996207 749012947

Forster Reloading Dies are of excellent quality and provide the reloader with the ability to produce concentric rounds time and time again. Each die is manufactured from the finest quality steel carefully machined to very tight tolerances. Dies are hand polished both before and after the heat-treating process to guarantee an extra fine finish. All Forster reloading dies feature their Forster Cross Bolt Die Locking Ring that tightens the two ends of the split ring instead of tightening a screw directly into the threads of the die. The Forster Ultra Seater includes all of the features of the Forster Bench Rest Seater Die above, plus an ultra accurate micrometer adjustment. This micrometer adjustment allows you to adjust bullet seating depth from .0005 inch to .001 inch increments, and makes switching bullets easy - just dial back to your previous recorded setting. Forster Ultra Seaters make fine tuning your bullets to the lands of your rifling simple.

Altro...

Le matrici di ricarica Forster sono di eccellente qualità e consentono al ricaricatore di produrre cartucce concentriche ripetutamente. Ogni matrice è realizzata in acciaio di prima qualità e lavorata con precisione per tolleranze molto strette. Le matrici sono lucidate a mano sia prima che dopo il processo di trattamento termico per garantire una finitura extra fine. Tutte le matrici di ricarica Forster presentano l'anello di bloccaggio Forster Cross Bolt che stringe i due estremi dell'anello diviso invece di avvitare direttamente nei filetti della matrice. La Forster Ultra Seater include tutte le caratteristiche della matrice Forster Bench Rest Seater Die, oltre a un microregolatore ultra preciso. Questo microregolatore consente di regolare la profondità di seduta del proiettile da incrementi di .0005 pollici a .001 pollici e rende facile il cambio di proiettili - basta riportarsi all'impostazione precedentemente registrata. Le Forster Ultra Seaters rendono semplice la messa a punto fine dei proiettili rispetto alle rigature della vostra canna.

Altro...

Punteggi dei clienti per FORSTER PRODUCTS, INC. 284 WINCHESTER MICROMETER SEATER DIE

Numero di punteggi: 8
Da brownells.com: 8
Punteggio medio: 4,3

Good..Better...Best (09/02/2011)

If I could give this product more than 5 stars then I would...And it deserves it...
Similar products claim to do a good job but simply put, there is no concentricity issues at all with these dies...
When the handle on the press is operated it is a single fluid motion that seats the projectile.
My reloads are now more accurate than I have ever made them.
EVERY reloader should have one of these.
ABRACADABRA is usually a word saved for magicians but is truely at home with Forster products. In fact, I think they should change the dictionary to say ABRACADABRA & FORSTER mean the same thing.

The Best I've Found (18/12/2011)

I wish they made these for pistols!!! Perfect bullet alignment, and due to the design you can compact the powder, unlike with some other designs. The fact that it is one of the less expensive choices is an added plus. Always perfect OAL and perfectly repeatable. The only choice, in my opinion.

Does not work in a Dillon 1050 press (20/04/2016)

Seems well made, but I couldn't use it with my 1050. That needs to be in the description.

Good but needed some work (04/05/2017)

I use this to load for my AR, a Ruger Ranch Rifle and a TC Encore. It works fine but when I first received it some work was needed. I noticed that the sliding sleeve would catch partway up and found that the roll marking on the bottom of the sleeve was raised sufficiently to drag on the outer housing. It was significant and I have no doubt it would have caused issues. Also, the seater plug had a ridge around the bottom where the bullet entered that cause significant drag in the sleeve. A bit of careful stoning made things better although the seater still feels a bit rough in the sleeve. Roll marking after precision machining on the sleeve seems like a real bad idea.

Good die but not for VLD bullets (12/05/2018)

I have several of these Forster Ultra Micrometer Seating Dies in various calibers. All have worked very well with standard weight for caliber bullets of conventional shape. I bought this die to seat heavy for caliber bullets in a .223 bolt gun. Although the 80 grain Sierra Match King bullet is not technically a VLD design the seating stem of this die would not engage the bullet consistently. Seating depths would vary by a much as 10 thousandths of an inch. Sometimes the bullet tip would bottom out inside the cup of the seating stem. After diagnosing the problem I discovered Forster does not have a VLD stem available. I returned this die to Brownells and purchased another manufacturer's die that has a VLD stem. This is a very good seating die but perhaps not appropriate for long profile bullets.

Best I've Found (18/12/2011)

Forster ultra seater 300WM (12/04/2011)

Easily adjustable O.A.L., Outstanding concentricity!

Forster Micrometer seater die - .223 Rem (19/12/2016)

I purchased a Foster "micrometer seating die" (.223 Rem.) at the same time I purchased my Forster Co-Ax single stage press (several years ago). What a nice combination. The Forster Co-Ax press works beautifully when reloading rifle cartridges and their seating die produces consistent results with little or no run out. I use to use a Lee seating die and get "so-so" results. Not knocking Lee dies because I use them for most of my reloading in pistol and some rifle work (neck sizing - crimping). The Forster micro seating die is a great addition to my reloading arsenal of equipment. I just purchased another one in .308 Win. I believe that speaks for itself. Excellent quality and excellent control of COAL and run out. Great combination when used with a Co-Ax press.

Leggi più recensioni su brownells.com

105.2 189.9 59 EUR

N. prodotto: 749012947
FORSTER PRODUCTS, INC. 284 WINCHESTER MICROMETER SEATER DIE
Parti Fabbricante: U00089 757253996207 Le matrici di ricarica Forster sono di eccellente qualità e consentono al ricaricatore di produrre cartucce concentriche ripetutamente. Ogni matrice è realizzata in acciaio di prima qualità e lavorata con precisione per tolleranze molto strette. Le matrici sono lucidate a mano sia prima che dopo il processo di trattamento termico per garantire una finitura extra fine. Tutte le matrici di ricarica Forster presentano l'anello di bloccaggio Forster Cross Bolt che stringe i due estremi dell'anello diviso invece di avvitare direttamente nei filetti della matrice. La Forster Ultra Seater include tutte le caratteristiche della matrice Forster Bench Rest Seater Die, oltre a un microregolatore ultra preciso. Questo microregolatore consente di regolare la profondità di seduta del proiettile da incrementi di .0005 pollici a .001 pollici e rende facile il cambio di proiettili - basta riportarsi all'impostazione precedentemente registrata. Le Forster Ultra Seaters rendono semplice la messa a punto fine dei proiettili rispetto alle rigature della vostra canna.

189.9 EUR 1 189,90 € *

Tempi di consegna circa 12-16 giorni.
1 pz. nel magazzino USA

Caratteristiche: Cartuccia: 284 Winchester Matrice tipo: Bullet Seating Dies

FORSTER PRODUCTS, INC. ULTRA™ MICROMETER SEATER DIES

Punteggi dei clienti per FORSTER PRODUCTS, INC. 284 WINCHESTER MICROMETER SEATER DIE

Top takeaways

Caratteristiche

Dettagli dell'elemento

Punteggi dei clienti per FORSTER PRODUCTS, INC. 284 WINCHESTER MICROMETER SEATER DIE

Collegare

Metodi di pagamento sicuri

Associazioni di categoria

Benvenuti!

FORSTER PRODUCTS, INC.
ULTRA™ MICROMETER SEATER DIES