Il Carrello è vuoto.

Carrello

Aiuto e contatti

Reso facile

Newsletter

Offerte

Oltre 300.000 clienti - vi ringraziamo!

4,93/5 "Molto buono" (1400+ recensioni)

Oltre 40.000 prodotti per caccia e sport di tiro

TJS CUSTOM
TJ'S 1911 SERIES '80 TO SERIES '70 CONVERSION SHIMS™

876000007

TJ's 1911 Series '80 to Series '70 Conversion Shims© (Frame Slot Filler) replace the gap used by the "Colt Series '80 Firing Pin Block Actuating Levers" when removed by gunsmiths for crisper trigger pulls. It is nessessary to fill this frame gap so the sear will not wander over and lock up the sear / trigger mechanism. Shim/slot filler fits in the frame cutout, permitting Series 70 slides and components to be fitted to Series 80 frames. No alteration, drop-in fit. Available in the standard .057” width, as well as .030”, .060” and .065”.

SPECS: Steel, in the-white.

Altro...

Le Conversion Shims© della TJ's 1911 da Serie '80 a Serie '70 (Riempitivo per Scanalatura Telaio) sostituiscono lo spazio utilizzato dalle "Leve di Attivazione del Blocco del Percussore Colt Serie '80" quando vengono rimossi dai gunsmiths per ottenere una sganciamento del grilletto più netto. È necessario riempire questa lacuna nel telaio affinché il cane non si sposti e blocchi il meccanismo di sganciamento cane/grilletto. Il riempitivo/inserto si adatta nella scanalatura del telaio, permettendo di montare scivoli e componenti della Serie 70 su telai della Serie 80. Non richiede modifiche, si installa facilmente. Disponibile nella larghezza standard di .057”, così come in .030”, .060” e .065”.

SPECIFICHE: Acciaio, non trattato.

Altro...

Punteggi dei clienti per TJS CUSTOM FRAME SLOT FILLER .060

Numero di punteggi: 25
Da brownells.com: 25
Punteggio medio: 4,9

Perfect Colt Competition fit (04/07/2017)

The .060 shim fit great in my Colt Competition 1911 45acp. I wanted to try the shim that was a tiny bit bigger than the standard shim size to fill the gap in a little better after measuring it with my calipers even though others said the standard size worked. Well the .060 shim fit great and filled the gap better so theres no rattle in the frame yet still works perfectly smooth. It dropped right in and dropped my trigger pull down to 3.5lbs. This is a great inexpensive part to convert your 80 series to 70 series for a much better trigger pull. I could not get it to blue so I just put a light coat of Slip2000 grease on it and put it in. This little part is totally worth it!

Simple yet effective (11/02/2011)

This plate is the reason I never pass on a 1911 with an 80 series system. It takes no time to install and allows unneeded parts to be eliminated.

works great (06/05/2011)

this works as advertised. it is easy to install. it fit perfect in my colt government model. I also did notice a slight decrease in trigger pull weight.

Great and Easy (20/01/2012)

This was just a perfect drop in part! It made the trigger pull way smoother! And it's nice to have the option to switch the parts back out to the 80 system.

Good to go! (10/03/2012)

Used on a Sig 1911 Scorpion Carry. It takes 10 minutes to install if you know how to detail strip and reassemble a series 80 1911. All pros, no cons. Allows you to get rid of some components that can potentially fail.

Buying two more (04/05/2012)

Fit was great just need to polish with some 1500# grit cloth

70 SERIES CONVERSION (15/05/2012)

Firstly this is a smokin' deal for a part that is so important. Installed on my Para GI Expert and Para Warthog. Improved the trigger immediatley! However the part should have the holes de-burred, and the metal looked raw, so I cold blued it and it took. Also the instructions suggest converting the slide first, which to me is like putting the cart before the horse. Make sure the piece fits your frame OK, then remove the plunger and spring from slide. I replaced the firing pin stop with stainless standard 1911 ones. Hope this helps! Best [$] to put in your gun!!

Series 70 Shim (16/08/2012)

I didn't like my trigger pull due to the whole firing pin safety plunger mechanism...this is the solution to that problem. Istalled in 5 minutes, immeditely improved my trigger.

Works great! (20/09/2012)

Worked exactly as advertised. Polished the edges and installed per the directions. It dropped right in.

No problem in a GSG 1911 (08/12/2012)

The GSG 1911 .22 is a nice gun filled with too many inexpensively manufactured parts with loose tolerances. It took many hours of hand fitting replacement parts to get it to cycle with cheep .22 ammo. The safety bits were not only useless but difficult to refit. The slot filler fits fine. Last item to add will be a ball head disconnector.

so simple even a marine can do it. (05/01/2013)

sweet part kiss design,my trigger is smooth like silk now. brownells has ultra fast shipping, overall good experiance with the part and the company.

Converted from 80 to 60 (27/01/2013)

Drop in, makes the reassembly much quicker, took the trigger from 3.5 lbs to 2.0. GREAT PRODUCT -- A MUST HAVE

Good Fit (30/03/2013)

This was a drop in fit for my Delta Elite.

Good part, vety minor fitting (17/08/2013)

I ordered the standard 0.057-inch filler for my Auto Ordnance M1911A1 clone. I had to sand it down a bit and polish to make it fit and work smoothly. Took maybe 30 minutes total for teardown to reassembly. Having all the Series 80 junk out of the way lighten trigger pull a good bit, more crisp too. Definitely worth the time.

piece of cake (24/01/2014)

I got the .057 size for my Auto Ordnance 1911A1. It was a simple "drop in" change. No fitting or filing needed. As I had heard, it did reduce the trigger pull by about a quarter pound. Since I use this gun for CMP matches, it was easy enough to tweak it back to just over 4 pounds.

Great little item. (21/10/2014)

P14-45 and went in with ease. I deburred the edges as they were quite rough. Fantastic price for something you can feel a difference in.

installed on R1 and P14.45 (06/01/2015)

trigger is better.

its not even w/ the frame like the original part.

could use some redesigning

Improved P18 Pro Custom, Springer Loaded (01/07/2015)

I've used these on three pistols, to rid them of their "Series 80 Infestation", and they're going into the rest of my Series 80-type guns. So far, I've used them on a Para P18 Pro Custom (lightened the pull by 14 oz); a Springfield Loaded Ultra Compact (17 oz improvement); and a Taurus PT 1911 (12 oz improvement). In addition to noticeably lightening the pull, the triggers, in all cases, feel crisper.

They are easy to install (assuming that you're completely comfortable detail stripping a 1911), although you should measure to make sure that you order the correct thickness for your pistol. As others have noted, some polishing & de-burring may be required, and some finish (at least cold blue) is probably a good idea, since the shim isn't stainless and comes "in the white". If you're not comfortable doing it yourself, a competent gunsmith should be able to do it in less than 30 minutes.

Overall, these are the easiest, least expensive, way that I've found to significantly improve the trigger on any Series 80 1911.

Easy fix for series 80 issues (02/08/2015)

Installation in to my 9mm series 80 Colt 1991 was very easy. If you can detail strip your series 80 1911 you can install this spacer. Trigger pull is down from 4.6 lbs to 3.5 lbs and it is crisper as well. All other safety functions are as they should be. It is described as steel in the white but Birchwood Casey cold blue had no effect on the metal so it's still in the white. I hope that corrosion won't be an issue.

The only bummer is paying more for standard shipping than for the product. They could have put this tiny gizmo in a first class envelope and mailed it for 49 cents rather than that pesky UPS/USPS hybrid service that cost $7.95 and takes forever.

Excellent and inexpensive solution (30/11/2015)

I used this shim in hopes of reducing the 6# trigger pull on a Colt Series 80 Government Model (in 9 mm Luger). The trigger pull was reduced to a crisp 4#; it worked marvelously. I used the standard 0.057"shim.

Solves the problem (06/04/2016)

After a little deburring and polishing was an easy install in a Remington 1911 R1. Turned a rough trigger pull into a smooth one. I hate that series 80 garbage.

It workd but... (22/11/2016)

I'll give it 5 stars because it works and it is fairly easy to install. However I learned the value of a firing pin block this afternoon and put the original parts back in.

Excellent (30/11/2016)

Excellent product. I dropped it right in my Colt Competition 9mm in about 10 minutes. Didn't even polish it up, and it dropped my trigger pull from 5 to 4 lbs; also made the pull crisper.

slot filler (13/03/2017)

installed in new AO GI 45

Nice part! (30/10/2017)

A couple years ago I bought a Colt .22 Conversion Unit (Series 70) on a Colt Series 80 frame. The previous owner simply cut the "arm" off the firing pin plunger lever in order to get it to work. I never liked this workaround so I replaced the Series 80 parts in the frame with this frame slot filler (I had it TiN coated) and it works perfectly. Now my gun works properly without any unnecessary parts.

<img width="500" src='/userdocs/reviewimages/948a60b7-01d8-4516-8ead-55095d072dba.jpg' alt=''>

Leggi più recensioni su brownells.com

19.9 41.9 4 EUR

N. prodotto: 876000007
TJS CUSTOM FRAME SLOT FILLER .060
Parti Fabbricante: NONE Le Conversion Shims© della TJ's 1911 da Serie '80 a Serie '70 (Riempitivo per Scanalatura Telaio) sostituiscono lo spazio utilizzato dalle "Leve di Attivazione del Blocco del Percussore Colt Serie '80" quando vengono rimossi dai gunsmiths per ottenere una sganciamento del grilletto più netto. È necessario riempire questa lacuna nel telaio affinché il cane non si sposti e blocchi il meccanismo di sganciamento cane/grilletto. Il riempitivo/inserto si adatta nella scanalatura del telaio, permettendo di montare scivoli e componenti della Serie 70 su telai della Serie 80. Non richiede modifiche, si installa facilmente. Disponibile nella larghezza standard di .057”, così come in .030”, .060” e .065”.

32.9 EUR 50 32,90 € *

Tempi di consegna circa 12-16 giorni.
Più di 10 pz. nel magazzino USA

Caratteristiche: Adatto per: 1911

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Top takeaways

I Conversion Shims di TJ's 1911 permettono di convertire un telaio Serie '80 in Serie '70 senza modifiche, riempiendo lo spazio lasciato dalle "Leve di Attivazione del Blocco del Percussore".
Facile da installare, garantisce un sganciamento del grilletto più netto e impedisce lo spostamento del cane, bloccando il meccanismo di sganciamento cane/grilletto.
Disponibile in diverse larghezze: .057”, .030”, .060” e .065”, realizzato in acciaio non trattato da TJS CUSTOM, adatto per modelli 1911.

Caratteristiche

Adatto per: 1911 Peso della spedizione: 0,091kg Altezza di spedizione: 8mm Larghezza di spedizione: 51mm Lunghezza di spedizione: 102mm

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.x

N. prodotto: 876011780
TJS CUSTOM FRAME SLOT FILLER, STANDARD, .057"
Parti Fabbricante: 1911SHIM 050806110335 Le Conversion Shims© della TJ's 1911 da Serie '80 a Serie '70 (Riempitivo per Scanalatura Telaio) sostituiscono lo spazio utilizzato dalle "Leve di Attivazione del Blocco del Percussore Colt Serie '80" quando vengono rimossi dai gunsmiths per ottenere una sganciamento del grilletto più netto. È necessario riempire questa lacuna nel telaio affinché il cane non si sposti e blocchi il meccanismo di sganciamento cane/grilletto. Il riempitivo/inserto si adatta nella scanalatura del telaio, permettendo di montare scivoli e componenti della Serie 70 su telai della Serie 80. Non richiede modifiche, si installa facilmente. Disponibile nella larghezza standard di .057”, così come in .030”, .060” e .065”.

19.9 EUR 724 19,90 € *

Tempi di consegna circa 12-16 giorni.
Più di 10 pz. nel magazzino USA

Caratteristiche: Adatto per: 1911

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

N. prodotto: 876000008
TJS CUSTOM FRAME SLOT FILLER .065
Parti Fabbricante: NONE Le Conversion Shims© della TJ's 1911 da Serie '80 a Serie '70 (Riempitivo per Scanalatura Telaio) sostituiscono lo spazio utilizzato dalle "Leve di Attivazione del Blocco del Percussore Colt Serie '80" quando vengono rimossi dai gunsmiths per ottenere una sganciamento del grilletto più netto. È necessario riempire questa lacuna nel telaio affinché il cane non si sposti e blocchi il meccanismo di sganciamento cane/grilletto. Il riempitivo/inserto si adatta nella scanalatura del telaio, permettendo di montare scivoli e componenti della Serie 70 su telai della Serie 80. Non richiede modifiche, si installa facilmente. Disponibile nella larghezza standard di .057”, così come in .030”, .060” e .065”.

41.9 EUR 67 41,90 € *

Tempi di consegna circa 12-16 giorni.
Più di 10 pz. nel magazzino USA

Caratteristiche: Adatto per: 1911

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

N. prodotto: 876000006
TJS CUSTOM FRAME SLOT FILLER .030
Parti Fabbricante: NONE Le Conversion Shims© della TJ's 1911 da Serie '80 a Serie '70 (Riempitivo per Scanalatura Telaio) sostituiscono lo spazio utilizzato dalle "Leve di Attivazione del Blocco del Percussore Colt Serie '80" quando vengono rimossi dai gunsmiths per ottenere una sganciamento del grilletto più netto. È necessario riempire questa lacuna nel telaio affinché il cane non si sposti e blocchi il meccanismo di sganciamento cane/grilletto. Il riempitivo/inserto si adatta nella scanalatura del telaio, permettendo di montare scivoli e componenti della Serie 70 su telai della Serie 80. Non richiede modifiche, si installa facilmente. Disponibile nella larghezza standard di .057”, così come in .030”, .060” e .065”.

25.9 EUR 0 25,90 € *

In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.

Caratteristiche: Adatto per: 1911

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Riempi lo spazio del telaio con i Conversion Shims™ TJ's 1911, per un grilletto più netto! 🔧 Facile da installare e senza modifiche.

SPECS: Steel, in the-white.

Altro...

SPECIFICHE: Acciaio, non trattato.

Altro...

Punteggi dei clienti per TJS CUSTOM FRAME SLOT FILLER .060

Numero di punteggi: 25
Da brownells.com: 25
Punteggio medio: 4,9

Perfect Colt Competition fit (04/07/2017)

Simple yet effective (11/02/2011)

This plate is the reason I never pass on a 1911 with an 80 series system. It takes no time to install and allows unneeded parts to be eliminated.

works great (06/05/2011)

this works as advertised. it is easy to install. it fit perfect in my colt government model. I also did notice a slight decrease in trigger pull weight.

Great and Easy (20/01/2012)

This was just a perfect drop in part! It made the trigger pull way smoother! And it's nice to have the option to switch the parts back out to the 80 system.

Good to go! (10/03/2012)

Buying two more (04/05/2012)

Fit was great just need to polish with some 1500# grit cloth

70 SERIES CONVERSION (15/05/2012)

Series 70 Shim (16/08/2012)

I didn't like my trigger pull due to the whole firing pin safety plunger mechanism...this is the solution to that problem. Istalled in 5 minutes, immeditely improved my trigger.

Works great! (20/09/2012)

Worked exactly as advertised. Polished the edges and installed per the directions. It dropped right in.

No problem in a GSG 1911 (08/12/2012)

so simple even a marine can do it. (05/01/2013)

sweet part kiss design,my trigger is smooth like silk now. brownells has ultra fast shipping, overall good experiance with the part and the company.

Converted from 80 to 60 (27/01/2013)

Drop in, makes the reassembly much quicker, took the trigger from 3.5 lbs to 2.0. GREAT PRODUCT -- A MUST HAVE

Good Fit (30/03/2013)

This was a drop in fit for my Delta Elite.

Good part, vety minor fitting (17/08/2013)

piece of cake (24/01/2014)

Great little item. (21/10/2014)

P14-45 and went in with ease. I deburred the edges as they were quite rough. Fantastic price for something you can feel a difference in.

installed on R1 and P14.45 (06/01/2015)

trigger is better.

its not even w/ the frame like the original part.

could use some redesigning

Improved P18 Pro Custom, Springer Loaded (01/07/2015)

Easy fix for series 80 issues (02/08/2015)

Excellent and inexpensive solution (30/11/2015)

Solves the problem (06/04/2016)

After a little deburring and polishing was an easy install in a Remington 1911 R1. Turned a rough trigger pull into a smooth one. I hate that series 80 garbage.

It workd but... (22/11/2016)

I'll give it 5 stars because it works and it is fairly easy to install. However I learned the value of a firing pin block this afternoon and put the original parts back in.

Excellent (30/11/2016)

Excellent product. I dropped it right in my Colt Competition 9mm in about 10 minutes. Didn't even polish it up, and it dropped my trigger pull from 5 to 4 lbs; also made the pull crisper.

slot filler (13/03/2017)

installed in new AO GI 45

Nice part! (30/10/2017)

Leggi più recensioni su brownells.com