Oltre 300.000 clienti - vi ringraziamo!

Oltre 40.000 prodotti per caccia e sport di tiro

Scopri le maniglie STOCKMAKER'S HANDSCREWS di Forster, ideali per un adattamento preciso del calcio. 🔩 Compatibili con Ruger e MK II.

FORSTER PRODUCTS, INC. STOCKMAKER'S HANDSCREWS - FORSTER PRODUCTS, INC. FITS RUGER & MK II, 10X32 THREAD

757253999482 319000003

Varianti:

FORSTER PRODUCTS, INC. FITS RUGER & MK II, 10X32 THREAD
35.9 EUR 1 35,90 € *
In magazzino
Adatto per: Ruger Modello: 77 Mark II
In magazzino
35.9 EUR 1 35,90 € *
FORSTER PRODUCTS, INC. FITS SAKO, 6X1MM THREAD
38.9 EUR 4 38,90 € *
In magazzino
Adatto per: Beretta Modello: Sako
In magazzino
38.9 EUR 4 38,90 € *
FORSTER PRODUCTS, INC. FITS SPRINGFIELD/KRAG, 1/4"-25 THREAD
35.9 EUR 4 35,90 € *
In magazzino
Adatto per: Springfield, Krag-Jorgensen
In magazzino
35.9 EUR 4 35,90 € *
FORSTER PRODUCTS, INC. FITS ENFIELD, 1/4"-30 THREAD
36.9 EUR 2 36,90 € *
In magazzino
Adatto per: Enfield
In magazzino
36.9 EUR 2 36,90 € *
FORSTER PRODUCTS, INC. FITS WINCHESTER 70, 1/4"-32 THREAD
36.9 EUR 3 36,90 € *
In magazzino
Adatto per: Winchester Modello: 70
In magazzino
36.9 EUR 3 36,90 € *
FORSTER PRODUCTS, INC. FITS 98 MAUSER, 1/4"-22 THREAD
38.9 EUR 3 38,90 € *
In magazzino
Adatto per: Mauser Modello: 98
In magazzino
38.9 EUR 3 38,90 € *
FORSTER PRODUCTS, INC. FITS REM 721/722/700; SAV 110; WBYMKV; DAKOTA 1/4"-28 THREAD
37.9 EUR 0 37,90 € *
Riordinato
Adatto per: Remington Modello: 700, 721, 722
Riordinato
37.9 EUR 0 37,90 € *
35.9 38.9 7 EUR
35.9 EUR 35,90 €

Tutti i prezzi sono comprensivi di Iva e oneri di importazione. Sono esclusi i costi di spedizione che verranno indicati nella procedura d'ordine.
P.IVA  C.F. IT02801420981

N. prodotto: 319000003

N. fab.: SMRUGR

757253999482 Consigliato dai principali fabbricanti di calci per un adattamento finale preciso e accurato del calcio all'azione.
In magazzino

Tempi di consegna circa 12-16 giorni.
1 pz. nel magazzino USA

1
2
3
4
5
6
7
8
9
10+

Tempi di consegna circa 12-16 giorni.
1 pz. nel magazzino USA

Varianti:

FORSTER PRODUCTS, INC. FITS RUGER & MK II, 10X32 THREAD
35.9 EUR 1 35,90 € *
In magazzino
Adatto per: Ruger Modello: 77 Mark II
In magazzino
35.9 EUR 1 35,90 € *
FORSTER PRODUCTS, INC. FITS SAKO, 6X1MM THREAD
38.9 EUR 4 38,90 € *
In magazzino
Adatto per: Beretta Modello: Sako
In magazzino
38.9 EUR 4 38,90 € *
FORSTER PRODUCTS, INC. FITS SPRINGFIELD/KRAG, 1/4"-25 THREAD
35.9 EUR 4 35,90 € *
In magazzino
Adatto per: Springfield, Krag-Jorgensen
In magazzino
35.9 EUR 4 35,90 € *
FORSTER PRODUCTS, INC. FITS ENFIELD, 1/4"-30 THREAD
36.9 EUR 2 36,90 € *
In magazzino
Adatto per: Enfield
In magazzino
36.9 EUR 2 36,90 € *
FORSTER PRODUCTS, INC. FITS WINCHESTER 70, 1/4"-32 THREAD
36.9 EUR 3 36,90 € *
In magazzino
Adatto per: Winchester Modello: 70
In magazzino
36.9 EUR 3 36,90 € *
FORSTER PRODUCTS, INC. FITS 98 MAUSER, 1/4"-22 THREAD
38.9 EUR 3 38,90 € *
In magazzino
Adatto per: Mauser Modello: 98
In magazzino
38.9 EUR 3 38,90 € *
FORSTER PRODUCTS, INC. FITS REM 721/722/700; SAV 110; WBYMKV; DAKOTA 1/4"-28 THREAD
37.9 EUR 0 37,90 € *
Riordinato
Adatto per: Remington Modello: 700, 721, 722
Riordinato
37.9 EUR 0 37,90 € *

Descrizione:

Mostra originale (inglese)
Posizionamento Rapido e Positivo
Consigliato dai principali fabbricanti di calci per un adattamento finale preciso e accurato del calcio all'azione.

Caratteristiche

  • Adatto per: Ruger
  • Modello: 77 Mark II
  • Peso della spedizione: 0,136kg
  • Altezza di spedizione: 10mm
  • Larghezza di spedizione: 74mm
  • Lunghezza di spedizione: 130mm
  • UPC: 757253999482

Dettagli dell'elemento

Made in Usa

Recensioni dei clienti

Valutazioni dei clienti (3)

3 / 5
Assolutamente raccomandato

Brownells USA Very useful 19/10/2014

I used this set to glass bed a sporterized 1917. As such the takedown screw on my rifle is quite short. It was therefore necessary to shorten the corresponding stockmaker screw to fit but that was the only modification needed. Wear and tear was saved on the original screws and these Forster tools were much handier during the glass bedding process. Given the proliferation of sporters made from military rifles it would seem impossible to make a set that would work with every rifle right out of the box. At the price point here, the investment of these tools is worth it even for one job.

Raccomandato con riserve

Brownells USA Handscrew too large 07/04/2012

The product is well made and I have and use several sets for other rifles (Win 70, Springfield and SAKO). I ordered these Mauser hand screws to inlet a M96 Swedish and found the bolt head diameter to be too large. They are .390" and that would not fit the Swede floorplate. The Swede bolt heads are .364". The long screw (rear) also was not properly fit for the Swede rear bolt and had to have its shoulder turned back about 3/16". These screws were very easily modified by knocking out the cross handle (its simply splined) and chucking the screw body in the lathe and dressing the screw to the proper diameters and lengths. Tap the cross handle back in and you're good to go. In a pinch, you could probably do this with a drill press and file. I eMailed Forester and their reply seemed befuddled. Maybe they fit an M98 but they didn't fit my Swede.

Scelti da altri clientie

4,3
In magazzino
104,90 € 99,90 € - 159,90 €
3,2
Riordinato
64,90 €
4,8
In magazzino
79,90 € 49,90 € - 84,90 €
1,4
Riordinato
74,90 € 19,90 € - 74,90 €

Lo sapevi?

Informazioni sul produttore

Operatore economico responsabile secondo il regolamento UE

Brownells
Via Mezzavilla 4
25043 Breno
Italia
service@brownells.it

Torna all'inizio