Three, reduced power springs for tuning and smoothing felt trigger pull. Fits the newer P220, P226 and P229's that use a short mainspring with a plastic, hammer spring base insert. Contains 1 each of 17, 18, and 19 lb., reduced power, mainsprings. P220 factory spring is 22 lb. P226 and P229 factory spring is 24 lb.
Altro...
Riduce la Corsa del Grilletto, Migliora la Precisione
Tre molle a potenza ridotta per regolare e migliorare la percezione della corsa del grilletto. Compatibili con i modelli più recenti di P220, P226 e P229 che utilizzano una molla principale corta con un inserto di base in plastica per la molla del martello. Il kit contiene 1 molla di ciascuna delle seguenti potenze ridotte: 17, 18 e 19 lb. La molla di fabbrica del P220 è di 22 lb, mentre quella del P226 e P229 è di 24 lb.
Altro...
Punteggi dei clienti per WOLFF SIG MAINSPRING KIT #32356
Numero di punteggi: 6
Da brownells.com: 4
Punteggio medio: 4,5
Wolff Sig Mainspring(11/07/2009)
Been using these to custom tune triggers on 226 9mm's for several years. As a stand alone part and replacement, it is ok but far from perfect. It does make for a slightly smoother pull, but is best used in conjunction with some polishing work, and Wolff Firing Pin Springs in order to custom tune the firing pin inertia and give you a reliable impact on the primer. If you don't, you may find some FTF/Light Strikes on hard primers found in a lot of Military/Surplus ammunition.
Easy to use for the garage gunsmith to give a slightly better pull, best used by a legitimate gunsmith for a truly significant improvement.
Works as advertised(23/03/2010)
I have been working on Sig pistols for over 10 years and have used these reduced power springs to improve trigger pulls for some time now and never had a single problem. They work as intended/adverised.
WOLFF SIG MAINSPRING KIT(06/05/2012)
This kit provides you with the proper spring for your special needs and all will reduce the trigger pull in DA and SA. A lot of parts polishing will make it smooth and the spring does the rest. I have always been able to get 100% ignition with the 17lbs spring but recommend a little heavier for a duty or self defense gun.
Works great(21/05/2017)
These reduced power mainsprings do as described. I'm currently using the 18lb spring as I had light primer strikes on CCI primers with the 17lb one. Next time I disassemble my slide, I'll replaced the factory firing pin spring with a reduced power one and retry the 17lb spring.
DA is down to approx 9lbs and SA is a crisp 3.5lbs.
buono(26/04/2017)
installato su sig 229 con short reset trigger - con molla 19 kg peso scatto praticamente come originale, con molla 18 kg peso scatto 4,6 kg in DA e 2,0 kg in SA, percussione affidabile
N. prodotto: 969000021 WOLFF SIG MAINSPRING KIT #32356 Parti Fabbricante: 32356 Tre molle a potenza ridotta per regolare e migliorare la percezione della corsa del grilletto. Compatibili con i modelli più recenti di P220, P226 e P229 che utilizzano una molla principale corta con un inserto di base in plastica per la molla del martello. Il kit contiene 1 molla di ciascuna delle seguenti potenze ridotte: 17, 18 e 19 lb. La molla di fabbrica del P220 è di 22 lb, mentre quella del P226 e P229 è di 24 lb.
29.9EUR029,90 €
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: Sig SauerModello: P226
Kit con tre molle a potenza ridotta (17, 18 e 19 lb) per migliorare la percezione della corsa del grilletto.
Compatibile con i modelli più recenti di P220, P226 e P229 che utilizzano una molla principale corta con inserto di base in plastica.
Prodotto da WOLFF, categoria principale: molla di recupero.
Caratteristiche
Adatto per:
Sig Sauer
Modello:
P226
Peso della spedizione: 0,005kgAltezza di spedizione: 10mmLarghezza di spedizione: 97mmLunghezza di spedizione: 180mm
Dettagli dell'elemento
Made in Usa
Migliora la corsa del grilletto con il SIG MAINSPRING KIT WOLFF #32356. Compatibile con SIG P220, P226 e P229. Include molle da 17, 18 e 19 lb. 🚀 Scopri di più!
Three, reduced power springs for tuning and smoothing felt trigger pull. Fits the newer P220, P226 and P229's that use a short mainspring with a plastic, hammer spring base insert. Contains 1 each of 17, 18, and 19 lb., reduced power, mainsprings. P220 factory spring is 22 lb. P226 and P229 factory spring is 24 lb.
Altro...
Riduce la Corsa del Grilletto, Migliora la Precisione
Tre molle a potenza ridotta per regolare e migliorare la percezione della corsa del grilletto. Compatibili con i modelli più recenti di P220, P226 e P229 che utilizzano una molla principale corta con un inserto di base in plastica per la molla del martello. Il kit contiene 1 molla di ciascuna delle seguenti potenze ridotte: 17, 18 e 19 lb. La molla di fabbrica del P220 è di 22 lb, mentre quella del P226 e P229 è di 24 lb.
Altro...
Punteggi dei clienti per WOLFF SIG MAINSPRING KIT #32356
Numero di punteggi: 6
Da brownells.com: 4
Punteggio medio: 4,5
Wolff Sig Mainspring(11/07/2009)
Been using these to custom tune triggers on 226 9mm's for several years. As a stand alone part and replacement, it is ok but far from perfect. It does make for a slightly smoother pull, but is best used in conjunction with some polishing work, and Wolff Firing Pin Springs in order to custom tune the firing pin inertia and give you a reliable impact on the primer. If you don't, you may find some FTF/Light Strikes on hard primers found in a lot of Military/Surplus ammunition.
Easy to use for the garage gunsmith to give a slightly better pull, best used by a legitimate gunsmith for a truly significant improvement.
Works as advertised(23/03/2010)
I have been working on Sig pistols for over 10 years and have used these reduced power springs to improve trigger pulls for some time now and never had a single problem. They work as intended/adverised.
WOLFF SIG MAINSPRING KIT(06/05/2012)
This kit provides you with the proper spring for your special needs and all will reduce the trigger pull in DA and SA. A lot of parts polishing will make it smooth and the spring does the rest. I have always been able to get 100% ignition with the 17lbs spring but recommend a little heavier for a duty or self defense gun.
Works great(21/05/2017)
These reduced power mainsprings do as described. I'm currently using the 18lb spring as I had light primer strikes on CCI primers with the 17lb one. Next time I disassemble my slide, I'll replaced the factory firing pin spring with a reduced power one and retry the 17lb spring.
DA is down to approx 9lbs and SA is a crisp 3.5lbs.
buono(26/04/2017)
installato su sig 229 con short reset trigger - con molla 19 kg peso scatto praticamente come originale, con molla 18 kg peso scatto 4,6 kg in DA e 2,0 kg in SA, percussione affidabile