Oversized, With Fluted Surface For Fast Charging & Jam Clearance
Easy to install, oversized charging handle helps you clear misfeeds and eject a chambered round quickly and efficiently. Machined steel construction, with a distinctive tubular shape, and deep, corkscrewpattern flutes give an excellent purchase and stylish look. No gunsmithing required.
SPECS: Steel, matte black finish. Benelli/Beretta fits Benelli M1/M2 (12/20 gauge) and Beretta Extrema. Rem. fits Remington 12 gauge 1100 and 11-87. Win./FN fits Winchester SX2/SX3, FN SLP, and Browning Silver.
Altro...
Ingrandita, Con Superficie Zigrinata Per Un Armamento Rapido e Sgancio Degli Inceppamenti
Facile da installare, la maniglia di armamento ingrandita ti aiuta a sgombrare inceppamenti ed espellere rapidamente ed efficientemente un colpo in camera. Costruzione in acciaio lavorato, con una forma tubolare distintiva e profonde scanalature a spirale che offrono una presa eccellente e un aspetto elegante. Non è richiesto l'intervento di un armaiolo.
SPECS: Acciaio, finitura opaca nera. Benelli/Beretta compatibile con Benelli M1/M2 (calibro 12/20) e Beretta Extrema. Rem. compatibile con Remington calibro 12 1100 e 11-87. Win./FN compatibile con Winchester SX2/SX3, FN SLP e Browning Silver.
Altro...
Punteggi dei clienti per NORDIC COMPONENTS SPEED BOLT HANDLE, BENELLI/BERETTA
Numero di punteggi: 5
Da brownells.com: 5
Punteggio medio: 4,4
Awesome(17/05/2012)
I just picked up an FN SLP Mark 1 and, like everything, I wanted to see what aftermarket stuff I could throw on it. Im very pleased with the shotgun and figured putting one of these on would make it even better. I did not anticipate how big of a difference this small piece would make. When charging the stock handle, especially when shouldered, I noticed my hand would rub against the housing primarily because of the limited size of the handle, and how close it rides to the bolt. With the Nordic handle you get a larger, easier to grab, handle which sticks out a little farther. Charging the Nordic can be done quickly and easily both over or under handed. Its an even bigger difference maker than putting an oversized charging handle (BCM Gunfighter) on your AR. BUY IT!!!!!!!!!!!
OEM-equipped on M2 3-Gun Edition(23/09/2012)
The NC speed charging handle is an excellent replacement for the factory handle. The NC handle weighs 14 grams, while the stock handle is 12 grams. The NC handle rotates inside the bolt housing, but it does not interfere with the use of the M2. The M2 3-Gun edition comes with this handle, and it is a fast 3 second replacement.
A+++++(12/01/2013)
Way better than expected!!!!
Thoroughly impressive(15/01/2015)
This is awesome. Great grip purchase due to the milling twist pattern, perfectly sized (big enough to be tactically advantageous is high stress situations where fine motor skills are diminished, not so big that it's stupid), weight close to stock (very slightly heavier), rotation is a good feature, and looks nice (tactiCOOL).
Poor design(03/04/2017)
Comfortable to use but needs modification out of the box to be installed on Benelli M2. When charging the bolt the bolt handle contacts the receiver and is pushed outward. This means that the bolt handle is no longer locked into the bolt and can easily fall out. This is a design flaw that could have been easily addressed at the factory and the fact that it wasn't gives me little faith in other Nordic Component products.
N. prodotto: 100005452 NORDIC COMPONENTS SPEED BOLT HANDLE, BENELLI/BERETTA Parti Fabbricante: BOH-BN816696021249 Facile da installare, la maniglia di armamento ingrandita ti aiuta a sgombrare inceppamenti ed espellere rapidamente ed efficientemente un colpo in camera. Costruzione in acciaio lavorato, con una forma tubolare distintiva e profonde scanalature a spirale che offrono una presa eccellente e un aspetto elegante. Non è richiesto l'intervento di un armaiolo.
74.9EUR474,90 €
*
Tempi di consegna circa 12-16 giorni. 4 pz. nel magazzino USA
La maniglia di armamento ingrandita facilita la rimozione di inceppamenti e l'espulsione dei colpi con efficienza.
Costruita in acciaio lavorato con scanalature a spirale per una presa eccellente e un aspetto elegante.
Compatibile con vari modelli di Benelli, Beretta, Remington, Winchester e FN, senza necessità di un armaiolo per l'installazione.
Caratteristiche
Adatto per:
Benelli,Beretta
Finitura:
Nero
Modello:
AL391 Xtrema,M1,M2
Peso della spedizione: 0,045kgLarghezza di spedizione: 57mmLunghezza di spedizione: 89mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 100005454 NORDIC COMPONENTS SPEED BOLT HANDLE, WINCHESTER/FN Parti Fabbricante: BOH-SX816696021270 Facile da installare, la maniglia di armamento ingrandita ti aiuta a sgombrare inceppamenti ed espellere rapidamente ed efficientemente un colpo in camera. Costruzione in acciaio lavorato, con una forma tubolare distintiva e profonde scanalature a spirale che offrono una presa eccellente e un aspetto elegante. Non è richiesto l'intervento di un armaiolo.
79.9EUR579,90 €
*
Tempi di consegna circa 12-16 giorni. 5 pz. nel magazzino USA
Caratteristiche:Adatto per: Winchester, FNFinitura: NeroModello: Super X-2, SLP, SX2, SX3, SLP Mark I
N. prodotto: 100005453 NORDIC COMPONENTS SPEED BOLT HANDLE, REMINGTON Parti Fabbricante: BOH-RM816696021263 Facile da installare, la maniglia di armamento ingrandita ti aiuta a sgombrare inceppamenti ed espellere rapidamente ed efficientemente un colpo in camera. Costruzione in acciaio lavorato, con una forma tubolare distintiva e profonde scanalature a spirale che offrono una presa eccellente e un aspetto elegante. Non è richiesto l'intervento di un armaiolo.
🔧 Maniglia di armamento SHOTGUN SPEED BOLT HANDLE di Nordic Components per Benelli/Beretta. Installazione facile, presa eccellente e design elegante. Scopri di più! 💥
Oversized, With Fluted Surface For Fast Charging & Jam Clearance
Easy to install, oversized charging handle helps you clear misfeeds and eject a chambered round quickly and efficiently. Machined steel construction, with a distinctive tubular shape, and deep, corkscrewpattern flutes give an excellent purchase and stylish look. No gunsmithing required.
SPECS: Steel, matte black finish. Benelli/Beretta fits Benelli M1/M2 (12/20 gauge) and Beretta Extrema. Rem. fits Remington 12 gauge 1100 and 11-87. Win./FN fits Winchester SX2/SX3, FN SLP, and Browning Silver.
Altro...
Ingrandita, Con Superficie Zigrinata Per Un Armamento Rapido e Sgancio Degli Inceppamenti
Facile da installare, la maniglia di armamento ingrandita ti aiuta a sgombrare inceppamenti ed espellere rapidamente ed efficientemente un colpo in camera. Costruzione in acciaio lavorato, con una forma tubolare distintiva e profonde scanalature a spirale che offrono una presa eccellente e un aspetto elegante. Non è richiesto l'intervento di un armaiolo.
SPECS: Acciaio, finitura opaca nera. Benelli/Beretta compatibile con Benelli M1/M2 (calibro 12/20) e Beretta Extrema. Rem. compatibile con Remington calibro 12 1100 e 11-87. Win./FN compatibile con Winchester SX2/SX3, FN SLP e Browning Silver.
Altro...
Punteggi dei clienti per NORDIC COMPONENTS SPEED BOLT HANDLE, BENELLI/BERETTA
Numero di punteggi: 5
Da brownells.com: 5
Punteggio medio: 4,4
Awesome(17/05/2012)
I just picked up an FN SLP Mark 1 and, like everything, I wanted to see what aftermarket stuff I could throw on it. Im very pleased with the shotgun and figured putting one of these on would make it even better. I did not anticipate how big of a difference this small piece would make. When charging the stock handle, especially when shouldered, I noticed my hand would rub against the housing primarily because of the limited size of the handle, and how close it rides to the bolt. With the Nordic handle you get a larger, easier to grab, handle which sticks out a little farther. Charging the Nordic can be done quickly and easily both over or under handed. Its an even bigger difference maker than putting an oversized charging handle (BCM Gunfighter) on your AR. BUY IT!!!!!!!!!!!
OEM-equipped on M2 3-Gun Edition(23/09/2012)
The NC speed charging handle is an excellent replacement for the factory handle. The NC handle weighs 14 grams, while the stock handle is 12 grams. The NC handle rotates inside the bolt housing, but it does not interfere with the use of the M2. The M2 3-Gun edition comes with this handle, and it is a fast 3 second replacement.
A+++++(12/01/2013)
Way better than expected!!!!
Thoroughly impressive(15/01/2015)
This is awesome. Great grip purchase due to the milling twist pattern, perfectly sized (big enough to be tactically advantageous is high stress situations where fine motor skills are diminished, not so big that it's stupid), weight close to stock (very slightly heavier), rotation is a good feature, and looks nice (tactiCOOL).
Poor design(03/04/2017)
Comfortable to use but needs modification out of the box to be installed on Benelli M2. When charging the bolt the bolt handle contacts the receiver and is pushed outward. This means that the bolt handle is no longer locked into the bolt and can easily fall out. This is a design flaw that could have been easily addressed at the factory and the fact that it wasn't gives me little faith in other Nordic Component products.