Magnesium & Titanium For Strength; Adjustable For Take-Up & Overtravel; Para-Ord. Models, Too
Titanium stirrup, magnesium shoe and two-way adjustability provide the best combination of strength, lower weight and crisp feeling response for an ultra-light, match quality trigger pull without flex, take-up or overtravel.
Magnesio & Titanio per Resistenza; Regolabile per Gioco & Sovrapposizione; Modelli Para-Ord. Inclusi
La staffa in titanio, la suola in magnesio e la regolazione bidirezionale offrono la migliore combinazione di resistenza, peso ridotto e una risposta nitida per un grilletto ultra-leggero di qualità da competizione, senza flessione, gioco o sovrapposizione.
SPECS: Suola in magnesio, staffa in titanio, finitura argentata. Lungo - 2.335" (5.9cm).
Caratteristiche
Finitura:Silver
Modello:Commander,Government,Officers
Tipo:Curved,Long,Solid
Tipo di arma:1911
Peso della spedizione:0,009kg
Altezza di spedizione:25mm
Larghezza di spedizione:83mm
Lunghezza di spedizione:146mm
Dettagli dell'elemento
Classificazione per l'export dagli US: 0A501.c
Recensioni dei clienti
Valutazioni dei clienti (15)
3,6 / 5
Assolutamente raccomandato
Definately NOT drop in! 12/08/2018
This trigger is super light yet built much stronger than the "K hole" I initially installed. If you are looking for a "drop in trigger" this isn't it. Fitting took over an hour and you will need the Brownells trigger stirrup of something similar. Everything is "oversize" for better fit and the shoe was off axis and canted which took a while to sort out. Once the geometry was correct, fitting was easier. I wound up filing on both sides and top and bottom so refinishing using a blast of baking soda was necessary to bring the finish back. I really like the way this trigger looks but it's not simple project.
Assolutamente raccomandato
great trigger super light 28/08/2014
Para p14 to get rid of plastic lots of grinding on bow but supper tight fit shoe not bad . Hardest part is polishing Inside of frame were bow pushes out all the way down all these metals grab each othere
Raccomandato
A little more work 31/08/2012
than I though there woul be. I installed the same trigger in my old Bullseye pistol years ago, with only a little fitting & polishing of the bow needed. This time, I had to trim the shoe for height and width to fit the trigger window and trim & polish the bow to fit the ways. The final adjustment was a little squeeze on the bow for final fitting. Once completed it's slicker than goose-grease!
Assolutamente raccomandato
the best for the money ! 29/07/2012
These can be time consuming to fit , but are worth both the money and the time. You can get rid of all take-up and over-travel and have a crisp, "right there " trigger , I have them in four 1911's and one in a STI 2011. I am very happy with them!!!
Raccomandato
My only choice for competition guns 08/05/2012
Yes, it DOES take a lot of work to fit one correctly, but once it's done there's nothing sweeter. I love the rounded feel of the shoe. The doublestack trigger is harder to fit properly than the single stack version but either way it's worth it. Make sure you know what you're doing! I have this trigger in a 1640 with a 1-lb 6-oz pull.
Assolutamente raccomandato
awesome trigger 18/03/2012
love the extreme light weight. adjustment tabs make fitting easy. best trigger ever for the Para wide body.
Assolutamente raccomandato
The best trigger for my builds 13/01/2011
This is the best competition trigger and my customers ask for it by name. I use the Dlask trigger whenever the finished product has to be a fine racegun used in competitions. It's of incredibly light weight and it allows for very minute adjustments. Yes, it requires fitting by a gunsmith who knows what he's doing, but the final result is worth the price of the trigger and labour.
Più o meno raccomandato
Not satisfied 25/12/2010
Loose fit on the bow side to side in the frame. The front tabs on the bow were not large enough to provide any custom fitting. The Shoe required extensive fitting.
Non raccomandato
Needs LOTS of fitting 28/10/2010
My gunsmith hated putting this in a para p14. Fit was awful and the final product isnt what it should be for the price. Next project gets a GunWorks trigger.
Non raccomandato
Overpriced and not functional 15/10/2010
Bought this trigger thinking that if I spent the kind of money Dlask is asking, that I should get a decent trigger. I was wrong. I had a gunsmith fit it and work on it to begin with. It felt like it was full of gravel and was way worse than stock. He said it was due to the materials in the trigger. I have since put about 8 man hours into polishing every part on my Para that the trigger touches, and polishing the bow and shoe. Still feels like its got gravel in it. In fact its so bad my trigger finger gets tired after shooting the gun. It seems like everything I do to this trigger makes it worse. [...]Its ridiculous.The Gun Craft trigger I had before was much better and I wish I would have kept that one..
Assolutamente raccomandato
Worth every penny! 06/08/2010
This trigger dropped right in my Citadel Compact 45. Very light trigger with easy adjustments. I have no play in the trigger, just click-bang. Looks great and worth every penny in my opinion. This trigger is unique. I love it!
Non raccomandato
Not sure 16/04/2010
I bought on for my P14-45 and my P16-40. For some reason, the one in the 16-40 corroded and not needs to be replaced. The one in the 14-45 seems fine. Don't know why one "behaved" and the other didn't, but I'd advise sticking with aluminum.
Assolutamente raccomandato
not for idiots 29/03/2010
I love it when non gunsmiths whine because their custom fit parts dont jump off the ups truck and install themselves.I have used this trigger in three different pistols of my own and installed it on a dozen more trigger jobs, it has been flawless every time. yes it requires fitting, (that means it is oversized, it is really hard to make a part bigger if it is undersized) but it is a very nice trigger if you know what you are doing, and if you don't, dont try and do a trigger rplacement with this or any trigger.
Assolutamente raccomandato
Great Trigger 27/11/2009
Exactly what I was shopping for to fit into a Gold Cup frame and a Series 70 Govt frame. Yes like the previous comment says you need to hand fit this trigger, it is not a drop in and go but if you want the perfection of a fitted trigger this is the way to go. The only negative I have on it is that the finish on the "finger" side will smooth down and change texture and look.
Non raccomandato
Don't waste your time 25/08/2009
I was looking for something different for my custom Colt, I saw this and like the looks, I purchased the product and when I went to install, it would not fit. The shoe was to wide; as well as, the trigger was too tall and wide. I realize that some fitting is required but this trigger required too much and for the price you think it would be a little more too tolerance. Don't waste your time with product.
Operatore economico responsabile secondo il regolamento UE
Brownells
Via Mezzavilla 4
25043 Breno
Italia
service@brownells.it
Ultimi visualizzati
Ops! Qualcosa è andato storto.
Si è verificato un errore durante il caricamento di questo contenuto. Aggiorna la pagina per continuare. Se il problema persiste, contatta il nostro servizio clienti.
*
Tutti i prezzi sono comprensivi di Iva e oneri di importazione. Sono esclusi i costi di spedizione che verranno indicati nella procedura d'ordine.
Scopri il grilletto ultra-leggero DLASK ARMS per 1911! ⚡ Resistente e regolabile, ideale per prestazioni di competizione. Finitura in argento.
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Asta di guida monopezzo in tungsteno da 5" adatta per 1911 Auto o STI con carrelli di lunghezza Government.
Richiede controllo e possibile adattamento da parte di un armaiolo esperto per evitare usura prematura o rottura.
Diametro di .326" (8.2mm) e peso di 3.1 oz. (88 g), con bordi smussati per un aspetto uniforme.
Il martello a basso profilo previene il pizzicamento del martello e ha un design “Retro” simile a un martello 1911A1 modificato.
Tutti i componenti sono lavorati con precisione da acciaio per utensili, trattati termicamente e lucidati per un montaggio e una durata ottimali.
Il kit include martello, scatto e disconnettore, con angoli primari e di rottura dello scatto pronti all'uso, ma modificabili da un armaiolo.
Il grasso leggero rimane dove viene applicato, riducendo l'attrito e l'usura delle armi da fuoco.
Non attira né trattiene contaminanti, mantenendo l'arma pulita più a lungo.
Raccomandato per fucili e carabine automatici e semi-automatici, eccellente per fucili AR sopra i 50°F.