Il Carrello è vuoto.

Carrello

Aiuto e contatti

Reso facile

Newsletter

Offerte

Oltre 300.000 clienti - vi ringraziamo!

4,93/5 "Molto buono" (1400+ recensioni)

Oltre 40.000 prodotti per caccia e sport di tiro

MGW
SEMI-AUTO SIGHT MOVER

584000004

Adjusts, Removes & Installs Sights Without Damage

Safely moves fixed sights right or left in their dovetails without deforming slide or sight. Specifically designed for use with factory and aftermarket Tritium night sights, which are too fragile for the traditional hammer-and-punch sight installation method; works equally well with iron sights. Thumbscrew securely locks the slide so it’s fully supported in the rigid, machined aluminum body. Separate slots in the screw mechanism engage the sight and firmly, yet gently, concentrate screw force to loosen sights from even extremely tight dovetails. Hardened steel handle provides plenty of leverage, while self-lubricating, oil-impregnated Oilite® bronze bearings and extra-fine threads ensure smooth, precise movement. Beretta/Glock fit rear sights only. Glock Flat-Side fits aftermarket rear sights with straight, non-sloped sides for standard- and large-frame Glock pistols. SIG fits rear sights on all SIGs except SIG-PRO. 1911 will not work with most Kimber slide/sight combinations. Only works on rear sights. Not for installing or adjusting front sights.

SPECS: Aluminum body, anodized. Steel cross carriage bolt and thumbscrew, black oxide finish. Beretta/Glock - 4¾” (12.1cm) wide, 3” (7.6cm) high, ¾” (19mm) thick. Glock Flat Side - 4¾" (12.1cm) wide, 2½" (6.4cm) high, 1¼" (3.2cm) thick. 1911 will not work with most Kimber slide/sight combinations.

Altro...

Regola, Rimuove & Installa Mirini Senza Danneggiamenti

Sposta in sicurezza i mirini fissi a destra o a sinistra nelle loro cave senza deformare la slitta o il mirino. Specificamente progettato per l'uso con mirini notturni Tritium di fabbrica e aftermarket, che sono troppo fragili per il tradizionale metodo di installazione del mirino con martello e punzone; funziona altrettanto bene con mirini in ferro. La vite a farfalla blocca in modo sicuro la slitta affinché sia completamente supportata nel corpo rigido e lavorato in alluminio. Slot separati nel meccanismo a vite impegnano il mirino e, con fermezza ma delicatamente, concentrano la forza della vite per allentare i mirini anche dalle cave estremamente strette. La maniglia in acciaio temprato offre abbondante leva, mentre i cuscinetti in bronzo Oilite® auto-lubrificanti impregnati d'olio e le filettature extra-fini assicurano un movimento liscio e preciso. Beretta/Glock adatto solo per mirini posteriori. Glock Flat-Side si adatta ai mirini posteriori aftermarket con lati dritti, non inclinati, per pistole Glock di dimensioni standard e grandi. SIG si adatta ai mirini posteriori su tutti i SIG tranne SIG-PRO. 1911 non è compatibile con la maggior parte delle combinazioni di carrello/mirino Kimber. Funziona solo su mirini posteriori. Non per installare o regolare mirini anteriori.

SPECIFICHE: Corpo in alluminio, anodizzato. Bullone del carrello trasversale e vite a farfalla in acciaio, finitura ossido nero. Beretta/Glock - Larghezza 4¾” (12.1cm), altezza 3” (7.6cm), spessore ¾” (19mm). Glock Flat Side - Larghezza 4¾" (12.1cm), altezza 2½" (6.4cm), spessore 1¼" (3.2cm). 1911 non è compatibile con la maggior parte delle combinazioni di carrello/mirino Kimber.

Altro...

Punteggi dei clienti per MGW FLAT-SIDE SIGHT MOVER FOR GLOCK®

Numero di punteggi: 47
Da brownells.com: 45
Punteggio medio: 4,2

Ottimo (31/10/2019)

Ottimo di qualità

Must have for installing Heinie sights (19/11/2011)

Faster and easier than using a punch and hammer to install Heinie sights on Glock slides.

Exactly what is needed (26/02/2014)

Worked exactly as advertised.

Great tool (02/04/2012)

The tool works great for standard sights and night sights on all the Cougar slides,even better yet it also works perfect on the Beretta PX4 slides. The only drawback is when installing adjustable sights you will have to do some grinding or fileing on the pusherblock in order for it to work. Made in the USA, great value

MGW Beretta 92 Sight Mover (23/10/2009)

Easy to Use and Veru useful for installing and adjusting Beretta 92 sights.

Works well (08/02/2012)

The sight pusher works great for the factory rear sight on the 92/M(. however it doesnt work with the adjustable sights on the Practice kit. The sight does not fight inside the "pusher area". i had to disassemble the sight to make it work.

overall well made.

Should be painted Lemon Yellow (14/12/2013)

The tool will remove factory sights on a 92FS, however if you want to install adjustable sights you will have to dismantle the sight for it to work. The sight pusher Block will not move out of the way far enough to remove your slide from the tool mount. If the slide locking screw was 1/4 inch shorter it may work, or if the pusher block could move 1/4 inch further left or right, it would be perfect.
The tool I received out of the box binds a bit as you move the sight pusher block left or right as if the guide rod was slightly off true or bent.

Disapointed (21/04/2014)

The tool worked fine to remove the old sight from my 96, but the new adjustable sight was to wide and I could not remove the slide from the tool once the sight was installed. I was forced to move the sight half way back out so I could remove the slide and then finnish the job with a punch and hammer. If the tool was a 1/4 inch wider to allow the clearence it would be perfect.

Doesn't work to install adjustable sight (22/05/2014)

Tool worked fine to remove the old sight from my 92A1. The new adjustable sight is too wide and wont fit in the adjustment tool. I ended up having to use a punch and hammer. If the tool was wider it would work.

Limited use (05/06/2014)

I bought this sight mover along with adjustable target sights. Used it on a 96A1 and 92FS. This device works great on standard sights, but is not compatible with adjustable target sights. Needs a redesign to be worth buying.

Works great (06/07/2009)

It works even better than the Glock factory sight adjustment tool since it fits all the guns and you don't need separate tools for the small frame and large frame pistols.

Easy way to change sights (14/09/2009)

Very easy to set up and use. Easily the best tool to use for moving Glock rear sights.

Highly Recommended (23/10/2009)

I have used this pusher on 3 different model Glocks, 21sf, 26, and 34. It is well worth the money.

Professional Tool! (17/04/2010)

Bought this to install Heinie straight 8's on a Glock 22 duty pistol. It almost took longer to read the one page instruction sheet than it did to remove the old Tru Dots and install the new Heinies. Considering I probably would have broken the tritium tube trying to pound the rears on with a drift, I'm glad I finally broke down and bought this pusher.

Best thing since sliced bread. (26/05/2010)

This tool is so awsome. I used it to install Glock Adjustable Rear Sights and Truglo TG131GT1 Rear Sight. Very easy to do. 100% recommended and well built piece of equipment. Should last my lifetime and many others.

Perfect Sight Mover (04/06/2010)

Just replaced three rear sights on my Glocks. Two .40s and one 45 this is the easiest tool to use and it couldn't have worked better. I know it only works on Glocks, but who wants to shoot anything else. This tool is cheap and works on all Glocks, get it. I am listing my Universal tool on [...] because this one is so good.

Do it Right the First Time (23/06/2010)

If you own Glocks, installing after market tritium sights is probable one of the first mods you will make. For the price of what a you pay for this tool you can get a gum smith to do it. If you do one more, it has paid for itself. Don't take the chance on using a hammer and punch! You do not want to punch in a radioactive sight. BTW, this tool also works on Sigs. They just get pushed or pulled out the other way. The tool is well made and more massive than the picture shows.

If you work on Glock pistols buy this (02/02/2011)

Large, sturdy, well made and it works perfectly. I received it last night, and a set of Heinie 3D night sights for a G17. I had the old rear sight off and the new one on in minutes. If your a Glock user or armorer this is a great tool. I recommend it because it works well.

Works Great! (03/02/2011)

No problems. I have performed many sight jobs with this tool now. It works great, pushing or pulling on Glocks.

Big, Bad. Tough. (04/04/2011)

Great heavy duty sight pusher worth every penny.

thumbs up (20/04/2011)

used on my glocks and did a little dremeling for it to fit the 30/21/20 rear sites. I just wish they would make a more universal tool that would do more then one brand of pistol.

Works perfect (26/05/2011)

This is very easy to use and well designed. Easily install and adjust sights on your glock

Product worked (06/08/2011)

This tool worked like it was suppose too. Although it ruined the factory plastic sight it installed the night sight without a problem.

Worth every penny !! (25/12/2011)

I've been putting off and making do without this sight pusher for a long time. It costs about the price of a good set of sights, which can be ruined and scratched by the traditional hammer and punch method especially the tritium ones. I have 3 glocks. It pays for itself in just a couple times it's used vs. paying someone. I used mine at the range to make final sight adjustments right there on the bench.... the fine threaded screw on this tool makes adjustments a breeze. dont buy the lousy cheap ones you see elsewhere, this is the only one you need. Only downside is that one model is made to do one type of sight.... but it does the job perfectly. If you dont want to make new friends, then hide this pusher and dont let anyone see you using it, else you are going to make a lot of friends. They remember, believe me !!

Could Not Be Happier (12/02/2012)

I used the MGW309 on a Gen 1, Glock 19, installing a MeproLight TruDot sight. The 309 is the tool desginated for sights with sloped sides (as opposed to the straight sided sights). I have yet to take the pistol and tool to the range, but based on my experience of the initial installation, adjustment at the range will not be an issue.

My only issue - which did not reduce my rating - was the instruction about clamping the pistol's slide into the tool. The tool's plate slides into the back of the pistol's slide the same way the pistol's receiver would. This makes for a very stable slide to tool attachment.

I chose this tool and sight because my wife's carry Glock has the same sights and I wanted to stay consistent. I am not a gunsmith, but I felt no uncertainty about taking on the task having seen it performed one time at a gunshop.

I could not be happier.

Works great (03/06/2012)

I'm a certified Glock armorer and have used one of these on all my Glocks using mostly Meprolight night and Tru-Dot adjustable, and TFO sights. I prefer it over factory sight tool. this sight tool is built rock solid. be sure to order the correct one, Flat or angled depending on what type of sights you use.

BEST SIGHT TOOL (16/06/2012)

I've tries several Glock Sight adjustment tools and the MGW's are BY FAR the best. Don't bother with anything else.

Simply Works (07/09/2012)

I have used this tool to remove the factory plastic rear sights and install factory tritium rear sights on 4 Gen 4 Glocks including the Model 21. There were no problems. The plastic rear sights were not damaged and could be reinstalled. No damage to the sights, slide or pusher. Nice smooth feel after a drop of Breakfree to the threads.

Well-made product (29/01/2013)

Very well-made product. Built to last. Works smoothly. WAY better than the ones Glock has made!!!

Fantastic Tool (19/03/2013)

Worked great on removing my old factory, plastic sights from my Glock 21SF. Also worked great when putting my TruGlo TFO sight on the same Glock 21SF. Will put this sight tool to great use as I am a Glock armorer. I did have to remove the shim that it comes with for use with the 21SF slide, though it is needed for the smaller slides, i.e., Glock 19, 22, etc...

Glock sight mover (19/04/2013)

The sight mover does move Glock sights. It would be a better tool if the portion that pushes the sight sat lower, closer to the sight when the frame is inserted into the tool. As it there is a tendency to put downward pressue on the sight, instead of straight across which would be much better which is why I rated the tool as only average. The sight itself seems to be well made, and hopefully it will last a long time. I would hesitate to recommend to a friend without more research to see if there are better designed tools available.

works just fine (28/11/2013)

Put new sights on my glock 19 also pushed the old glock plastic sights off.This tool is top of the line should last my livetime.

Doesn't work well with glock 20 (31/05/2014)

The slide was a little snug inserting into the tool, but not what I would consider difficult or out of the ordinary. The sight came out with very little difficulty, but the finish was stripped from the top of the slide. Not real happy about that, hence the 2 stars. I took out the shim from the tool for enough clearance to install the new sight.

Great product! Limited versatility (16/08/2014)

Well built, robust, and Great product! It came today and i was able to change out my factory sights for trijicon HDs in 5 mins. Initially i tried using a padded vice and nylon punch which did the trick to get the factory sights off, but wasnt effective to install my HDs. I would recommend covering the side of your new sights that come into contact with the pusher with electric tape or something else to prevent scratching the sights. If you have multiple glocks this product pays for itself, but if you only have one, a gunsmith might be more cost effective. The product lacks versatility. This will only work for glocks using the factory profile sights eg meprolights, HDs, etc. wont work for straight sights eg heinie, warren etc.

Excellent tool (08/05/2015)

Bought this to install Trijicon HD sights. This tool worked excellent, even though rear sight was tight. If I had to use a hammer and punch it would have marred up the rear sight. I would highly recommend this product. I wish I owned it years ago. No more paying a gunsmith to install your sights and have a professional look. You can also adjust the rear sights for POI also. Very well done MGW.

MGW for Glock (05/09/2015)

Had a gift certificate and used it on this item. After installing 3 pairs of sights on a 19,26, and 43, I can tell you it is well worth it. Rear sight removal and install was done without a hitch on all three Glocks (had the adapter for the 43).

Works like a champ! (06/07/2016)

Though not a gunsmith per se with five Glocks I thought it time to enable myself to do sight work on them rather than have others do it. Chose this tool over others after searching all over for reviews and comments. After reading and re-reading the one paragraph instructions and using utmost care I did two rear sights within about fifteen minutes. One was on my twenty year old (as of last month) Glock 26 which I figured would be a good test case. No muss, no damage, nothing but perfection. As long as you have clearance and the sight keeps moving while you're turning the handle I don't see how you can damage the sight or slide. Note: The instructions do say if you can't turn the handle stop or you can damage the tool, sight, or slide since obviously the sight is basically frozen in the dovetail. Night sights on my new Glock 19 was a snap. Both required the provided shim to ensure proper clearance. Limited function since this model is designed only for angled sights but face it, this is a specialty tool. Obviously well machined and built to last forever. Take you time, make sure you have assembled the slide into the tool correctly and I don't see how you can go wrong.

Great tool (30/12/2017)

This tool is very useful and is a great investment. I have replaced factory sights and old burned out Trijicon sights in both medium and large frame Glocks. I also helped install my friends sights. It is easy to use and well made.

Damaged my slide (31/01/2018)

Tool came with the wrong size shim which was apparently a known issue. This caused the tool to scratch the finish on my slide. Instead of lazily including the correct shim with a note, the wrong shim should have been removed and replaced. Sloppy, haphazard and lazy

Too easy to use! (01/06/2018)

First of all, Brownells has super fast shipping! This is like Amazon Prime for gun parts! This tool is so easy to use. Simply mount the slide and crank. Great quality tool and functions just as described. I'll be using this tool a lot!

Dont' waste your money (26/10/2009)

Unless the sight is very loose in the dovetail, this cannot move the sight for any kind of fine adjustment. A better option is a nylon tipped punch. This thing is a waste of time.

Has worked well for years (02/06/2010)

I have had one of these for years and it makes rear sight installation and adjustment a snap. If you just need to do one installation on a 1911 style gun, it might be overkill. But it makes installation and fine adjustment much easier than with a punch, and worth it if you do adjustments, installations, or sight changes routinely.

works great (12/11/2010)

For modern firearms with tight dovetails nothig works better to replace sights or shift sights without damage

Only does the rear sight (29/11/2010)

Unlike the SIG version, this model will not work on front dovetailed sights and is very limited in it's range of use.

Outside of a very tight fitting rear tritium sight that you won't want to use a punch on (they break easily) there is not much use for it.

Great tool... (15/09/2011)

This tool is not the one I would recommend for the casual user, it is very specialized. For certain gun/sight combinations it is the BEST I have used. If you are moving really tight sights on 1911's, or installing Tritium sights on a regular basis this is a got-to-have tool.

does not work (24/09/2012)

tried to use on a new combat commander.
sight mover not nearly close enough to put pressure on sight.
can not be used on the front sight.
sending it back.

Eccelente (30/11/2015)

Strumento robusto, affidabile, di facile e intuitivo utilizzo mi ha permesso di sostituire rapidamente la tacca di mira della mia Glock

Leggi più recensioni su brownells.com

194.9 194.9 4 EUR

N. prodotto: 584000004
MGW FLAT-SIDE SIGHT MOVER FOR GLOCK®
Parti Fabbricante: MGW309S Sposta in sicurezza i mirini fissi a destra o a sinistra nelle loro cave senza deformare la slitta o il mirino. Specificamente progettato per l'uso con mirini notturni Tritium di fabbrica e aftermarket, che sono troppo fragili per il tradizionale metodo di installazione del mirino con martello e punzone; funziona altrettanto bene con mirini in ferro. La vite a farfalla blocca in modo sicuro la slitta affinché sia completamente supportata nel corpo rigido e lavorato in alluminio. Slot separati nel meccanismo a vite impegnano il mirino e, con fermezza ma delicatamente, concentrano la forza della vite per allentare i mirini anche dalle cave estremamente strette. La maniglia in acciaio temprato offre abbondante leva, mentre i cuscinetti in bronzo Oilite® auto-lubrificanti impregnati d'olio e le filettature extra-fini assicurano un movimento liscio e preciso. Beretta/Glock adatto solo per mirini posteriori. Glock Flat-Side si adatta ai mirini posteriori aftermarket con lati dritti, non inclinati, per pistole Glock di dimensioni standard e grandi. SIG si adatta ai mirini posteriori su tutti i SIG tranne SIG-PRO. 1911 non è compatibile con la maggior parte delle combinazioni di carrello/mirino Kimber. Funziona solo su mirini posteriori. Non per installare o regolare mirini anteriori.

194.9 EUR 3 194,90 € *

Tempi di consegna circa 12-16 giorni.
3 pz. nel magazzino USA

Caratteristiche: Adatto per: Glock Modello: Universal Handguns

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Top takeaways

Progettato per spostare in sicurezza i mirini fissi senza deformarli, ideale per mirini notturni Tritium e mirini in ferro.
La vite a farfalla e i cuscinetti in bronzo Oilite® assicurano un movimento liscio e preciso.
Compatibile con mirini posteriori per Glock, Beretta e SIG, ma non per mirini anteriori o combinazioni specifiche come 1911 Kimber.

Caratteristiche

Adatto per: Glock Modello: Universal Handguns Peso della spedizione: 0,748kg Altezza di spedizione: 56mm Larghezza di spedizione: 117mm Lunghezza di spedizione: 224mm

Dettagli dell'elemento

Made in Usa

Operatore economico responsabile secondo il regolamento UE

Brownells
Via Mezzavilla 4
25043 Breno
Italia
service@brownells.it

N. prodotto: 584045001
MGW 1911 AUTO SIGHT MOVER-REAR SIGHTS ONLY
Parti Fabbricante: MGW310 Sposta in sicurezza i mirini fissi a destra o a sinistra nelle loro cave senza deformare la slitta o il mirino. Specificamente progettato per l'uso con mirini notturni Tritium di fabbrica e aftermarket, che sono troppo fragili per il tradizionale metodo di installazione del mirino con martello e punzone; funziona altrettanto bene con mirini in ferro. La vite a farfalla blocca in modo sicuro la slitta affinché sia completamente supportata nel corpo rigido e lavorato in alluminio. Slot separati nel meccanismo a vite impegnano il mirino e, con fermezza ma delicatamente, concentrano la forza della vite per allentare i mirini anche dalle cave estremamente strette. La maniglia in acciaio temprato offre abbondante leva, mentre i cuscinetti in bronzo Oilite® auto-lubrificanti impregnati d'olio e le filettature extra-fini assicurano un movimento liscio e preciso. Beretta/Glock adatto solo per mirini posteriori. Glock Flat-Side si adatta ai mirini posteriori aftermarket con lati dritti, non inclinati, per pistole Glock di dimensioni standard e grandi. SIG si adatta ai mirini posteriori su tutti i SIG tranne SIG-PRO. 1911 non è compatibile con la maggior parte delle combinazioni di carrello/mirino Kimber. Funziona solo su mirini posteriori. Non per installare o regolare mirini anteriori.

194.9 EUR 2 194,90 € *

Tempi di consegna circa 12-16 giorni.
2 pz. nel magazzino USA

Caratteristiche: Adatto per: 1911 Modello: Government, Commander, Officers

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

N. prodotto: 584045017
MGW SIGHT MOVER FOR GLOCK®
Parti Fabbricante: MGW309 Sposta in sicurezza i mirini fissi a destra o a sinistra nelle loro cave senza deformare la slitta o il mirino. Specificamente progettato per l'uso con mirini notturni Tritium di fabbrica e aftermarket, che sono troppo fragili per il tradizionale metodo di installazione del mirino con martello e punzone; funziona altrettanto bene con mirini in ferro. La vite a farfalla blocca in modo sicuro la slitta affinché sia completamente supportata nel corpo rigido e lavorato in alluminio. Slot separati nel meccanismo a vite impegnano il mirino e, con fermezza ma delicatamente, concentrano la forza della vite per allentare i mirini anche dalle cave estremamente strette. La maniglia in acciaio temprato offre abbondante leva, mentre i cuscinetti in bronzo Oilite® auto-lubrificanti impregnati d'olio e le filettature extra-fini assicurano un movimento liscio e preciso. Beretta/Glock adatto solo per mirini posteriori. Glock Flat-Side si adatta ai mirini posteriori aftermarket con lati dritti, non inclinati, per pistole Glock di dimensioni standard e grandi. SIG si adatta ai mirini posteriori su tutti i SIG tranne SIG-PRO. 1911 non è compatibile con la maggior parte delle combinazioni di carrello/mirino Kimber. Funziona solo su mirini posteriori. Non per installare o regolare mirini anteriori.

194.9 EUR 10 194,90 € *

Tempi di consegna circa 12-16 giorni.
Più di 10 pz. nel magazzino USA

Caratteristiche: Adatto per: Glock Modello: Universal Handguns

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

N. prodotto: 584045092
MGW BERETTA 92 SIGHT MOVER
Parti Fabbricante: MGW308 Sposta in sicurezza i mirini fissi a destra o a sinistra nelle loro cave senza deformare la slitta o il mirino. Specificamente progettato per l'uso con mirini notturni Tritium di fabbrica e aftermarket, che sono troppo fragili per il tradizionale metodo di installazione del mirino con martello e punzone; funziona altrettanto bene con mirini in ferro. La vite a farfalla blocca in modo sicuro la slitta affinché sia completamente supportata nel corpo rigido e lavorato in alluminio. Slot separati nel meccanismo a vite impegnano il mirino e, con fermezza ma delicatamente, concentrano la forza della vite per allentare i mirini anche dalle cave estremamente strette. La maniglia in acciaio temprato offre abbondante leva, mentre i cuscinetti in bronzo Oilite® auto-lubrificanti impregnati d'olio e le filettature extra-fini assicurano un movimento liscio e preciso. Beretta/Glock adatto solo per mirini posteriori. Glock Flat-Side si adatta ai mirini posteriori aftermarket con lati dritti, non inclinati, per pistole Glock di dimensioni standard e grandi. SIG si adatta ai mirini posteriori su tutti i SIG tranne SIG-PRO. 1911 non è compatibile con la maggior parte delle combinazioni di carrello/mirino Kimber. Funziona solo su mirini posteriori. Non per installare o regolare mirini anteriori.

194.9 EUR 9 194,90 € *

Tempi di consegna circa 12-16 giorni.
9 pz. nel magazzino USA

Caratteristiche: Adatto per: Beretta Modello: 92

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Sposta i mirini Glock® in sicurezza con il SEMI-AUTO SIGHT MOVER MGW. 🔧 Design robusto per un'installazione precisa e facile.

Adjusts, Removes & Installs Sights Without Damage

Altro...

Regola, Rimuove & Installa Mirini Senza Danneggiamenti

Altro...

Punteggi dei clienti per MGW FLAT-SIDE SIGHT MOVER FOR GLOCK®

Numero di punteggi: 47
Da brownells.com: 45
Punteggio medio: 4,2

Ottimo (31/10/2019)

Ottimo di qualità

Must have for installing Heinie sights (19/11/2011)

Faster and easier than using a punch and hammer to install Heinie sights on Glock slides.

Exactly what is needed (26/02/2014)

Worked exactly as advertised.

Great tool (02/04/2012)

MGW Beretta 92 Sight Mover (23/10/2009)

Easy to Use and Veru useful for installing and adjusting Beretta 92 sights.

Works well (08/02/2012)

Should be painted Lemon Yellow (14/12/2013)

Disapointed (21/04/2014)

Doesn't work to install adjustable sight (22/05/2014)

Limited use (05/06/2014)

Works great (06/07/2009)

It works even better than the Glock factory sight adjustment tool since it fits all the guns and you don't need separate tools for the small frame and large frame pistols.

Easy way to change sights (14/09/2009)

Very easy to set up and use. Easily the best tool to use for moving Glock rear sights.

Highly Recommended (23/10/2009)

I have used this pusher on 3 different model Glocks, 21sf, 26, and 34. It is well worth the money.

Professional Tool! (17/04/2010)

Best thing since sliced bread. (26/05/2010)

Perfect Sight Mover (04/06/2010)

Do it Right the First Time (23/06/2010)

If you work on Glock pistols buy this (02/02/2011)

Works Great! (03/02/2011)

No problems. I have performed many sight jobs with this tool now. It works great, pushing or pulling on Glocks.

Big, Bad. Tough. (04/04/2011)

Great heavy duty sight pusher worth every penny.

thumbs up (20/04/2011)

used on my glocks and did a little dremeling for it to fit the 30/21/20 rear sites. I just wish they would make a more universal tool that would do more then one brand of pistol.

Works perfect (26/05/2011)

This is very easy to use and well designed. Easily install and adjust sights on your glock

Product worked (06/08/2011)

This tool worked like it was suppose too. Although it ruined the factory plastic sight it installed the night sight without a problem.

Worth every penny !! (25/12/2011)

Could Not Be Happier (12/02/2012)

Works great (03/06/2012)

BEST SIGHT TOOL (16/06/2012)

I've tries several Glock Sight adjustment tools and the MGW's are BY FAR the best. Don't bother with anything else.

Simply Works (07/09/2012)

Well-made product (29/01/2013)

Very well-made product. Built to last. Works smoothly. WAY better than the ones Glock has made!!!

Fantastic Tool (19/03/2013)

Glock sight mover (19/04/2013)

works just fine (28/11/2013)

Put new sights on my glock 19 also pushed the old glock plastic sights off.This tool is top of the line should last my livetime.

Doesn't work well with glock 20 (31/05/2014)

Great product! Limited versatility (16/08/2014)

Excellent tool (08/05/2015)

MGW for Glock (05/09/2015)

Works like a champ! (06/07/2016)

Great tool (30/12/2017)

Damaged my slide (31/01/2018)

Too easy to use! (01/06/2018)

Dont' waste your money (26/10/2009)

Unless the sight is very loose in the dovetail, this cannot move the sight for any kind of fine adjustment. A better option is a nylon tipped punch. This thing is a waste of time.

Has worked well for years (02/06/2010)

works great (12/11/2010)

For modern firearms with tight dovetails nothig works better to replace sights or shift sights without damage

Only does the rear sight (29/11/2010)

Great tool... (15/09/2011)

does not work (24/09/2012)

tried to use on a new combat commander.
sight mover not nearly close enough to put pressure on sight.
can not be used on the front sight.
sending it back.

Eccelente (30/11/2015)

Strumento robusto, affidabile, di facile e intuitivo utilizzo mi ha permesso di sostituire rapidamente la tacca di mira della mia Glock

Leggi più recensioni su brownells.com