90 degree standard throw lever 60 degree short throw lever Available in black Drop in replacement for Mil-Spec selector switch Fully ambidextrous Not recommended to be used with the Hipertouch trigger
Leva di attivazione standard a 90 gradi, leva a corsa corta a 60 gradi Disponibile in nero Sostituzione diretta per l'interruttore di selezione Mil-Spec Completamente ambidestro Non consigliato per l'uso con il grilletto Hipertouch
Caratteristiche
Tipo di arma:AR-15
Peso della spedizione:0,018kg
Altezza di spedizione:6mm
Larghezza di spedizione:83mm
Lunghezza di spedizione:108mm
UPC:811452029309
Dettagli dell'elemento
Made in Usa
Classificazione per l'export dagli US: 0A501.x
Recensioni dei clienti
Valutazioni dei clienti (6)
3,5 / 5
Assolutamente raccomandato
Suprised! 13/12/2017
I did not actually read the product description nor reviews when i ordered it. I thought it was just a regular ambi safety with fancy arms. When i got it, i realized that it has 2 safety groove cut in it, 1 side is the regular 90 degree cut and the other side is 60 degree short throw cut. That is a bonus for me as i have both regular marked lowers and 60 degree sts marked lowers.
I did not experienced any fitment issue that other reviewers have. It fitted my Noveske, aero precision, armalite and spike tactical lowers. It is a tighter fit in my Noveske, which i believe has everything to do with the fact that Noveske cerakote and anodize all their lowers.
I will be buying a few more of these.
Più o meno raccomandato
Maybe not. 04/06/2017
Safety was mot mil spec diameter. Would not fit at all in hole, when standard mil spec single selector safety dropped right in. Had to auger it into both holes so it milled out some of the aluminum lower receiver. Finally took an emery cloth to it and filed it down on both ends of the shaft. Put the lower together and it wouldn't go full 12 o'clock to release the trigger without using your thumb to give it that extra millimeter(s). Bad tetent channel maybe? Took it out and reversed it so it's now a short throw.... now it works, but a lot or work and not a cheap safety for the trouble it gave me.
Raccomandato con riserve
Didn't fit on two different rifles. 27/04/2017
This is my 3rd Seekins ambi safety and I've been pleased up to this point. The first two I purchased were installed on Palmetto State Armory lowers and they went in and function without issue. Based on those experiences I purchased a 3rd Seekins for use on a factory Daniel Defense rifle. The safety seems a bit overlarge in diameter as it was very tight when inserted in the first hole in the receiver, and could not be pushed all the way to the other side. I then tried to install the safety on a factory Armalite rifle, and again would not fit. Fortunately I had another rifle with a Palmetto receiver that had a CAA ambi safety installed. I removed the CAA and installed the Seekins in the Palmetto without difficulty. The CAA safety was then installed in the Armalite rifle without difficulty. I could have done a bit of careful fitting and probably gotten the Seekins to fit in the Armalite and Daniel Defense but I don't really want to be sanding on an anodized part.
Assolutamente raccomandato
Well made, easy install, good fit. 23/03/2017
Purchased two of these in black. Installed one in a Palmetto AR9 and the other in a Palmetto AR15. Both went in without difficulty, look good, and operate well. I shoot left-handed and this product makes manipulating the safety much easier.
Assolutamente raccomandato
Great product 29/03/2016
Super easy to install, especially liked the way you can switch the controls to be 60 or 90 degrees just by turning over the base. Way better pricing than other versions on the market.
Non raccomandato
Loose fit 11/03/2016
There is a 3/32" gap between the receiver and the safety lever on each side of the receiver. Almost slips over the stops on the receiver. Also, the anodizing on one of the levers is purple instead of black. I will be returning this. This is the first Seekins product I have ever had an issue with.
Operatore economico responsabile secondo il regolamento UE
Brownells
Via Mezzavilla 4
25043 Breno
Italia
service@brownells.it
Ultimi visualizzati
Ops! Qualcosa è andato storto.
Si è verificato un errore durante il caricamento di questo contenuto. Aggiorna la pagina per continuare. Se il problema persiste, contatta il nostro servizio clienti.
*
Tutti i prezzi sono comprensivi di Iva e oneri di importazione. Sono esclusi i costi di spedizione che verranno indicati nella procedura d'ordine.
Scopri il Kit Selettore di Sicurezza Ambidestro in nero di Seekins Precision. 🔒 Perfetto per AR-15 e facile da installare!
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Le guarnizioni in acciaio temprato assicurano una vestibilità precisa e un corretto allineamento di flash suppressors, muzzle brakes e compensatori.
La guarnizione grande consente una rotazione di 90° e può essere utilizzata come distanziatore per le canne senza taglio di alleggerimento.
Le guarnizioni medie e piccole aggiungono rispettivamente circa 45° e gradi minori di rotazione, permettendo un allineamento critico finemente regolato.
Il RA-140 RAVE offre uno scatto netto e fluido con un breve reset Quik-Klik™ percepibile, senza necessità di viti di fissaggio.
Include perni anti-camminata gratuiti e parti interne rivestite in Melonite per resistenza e durabilità superiori.
Compatibile con piattaforme AR mil-spec, è supportato dalla Garanzia di Prestazione Più-Bang-per-il-Tuo-Buck di RISE e dalla Garanzia a Vita.
Il Radian Weapons Raptor-LT Charging Handle è realizzato in alluminio 7075 con rivestimento anodizzato hard-coat resistente alla corrosione e maniglia in polimero rinforzato con fibra di vetro.
È completamente ambidestro e disponibile in nero, terra scura piatta e grigio, compatibile con la maggior parte dei fucili AR-15/M16.
Progettato e costruito interamente negli USA, offre un significativo miglioramento rispetto al charging handle standard per i possessori di AR-15.
L'RSA-QD fornisce un punto di attacco anteriore per la fionda Magpul MS4 e altre fionde QD a pulsante.
Realizzato in acciaio con finitura Melonite, si monta su binario Picatinny 1913.
Posiziona il punto di attacco in un angolo ottimizzato per l'uso confortevole della fionda a due punti, mantenendo al contempo un facile accesso al pulsante.
Le sezioni di binario in polimero M-LOK sono progettate per l'uso con tutti i Hand Guards e Forends compatibili M-LOK e permettono il montaggio di accessori su binari Picatinny 1913.
Realizzate in composito rinforzato, offrono resistenza e durabilità pur rimanendo leggere, con estremità smussate per ridurre l'aggancio.
Include tutte le ferramenta necessarie per il montaggio su hand guards e forends in alluminio o polimero.