One kit so you can precisely tune the autos listed for smoothest double and/or single actions' pull and proper functioning.KIT #26520 COLT 1911 & COMMANDER - Contains 1 each 19 lb., 20 lb. and 21 lb. hammer springs. Factory spring is 23 lbs.
Altro...
3 Opzioni di Regolazione in 1
Un kit per permetterti di regolare con precisione le auto elencate per ottenere la più fluida azione doppia e/o singola e un funzionamento corretto. KIT #26520 COLT 1911 & COMMANDER - Contiene 1 ciascuna molla del martello da 19 lb., 20 lb. e 21 lb. La molla di fabbrica è di 23 lb.
Altro...
Punteggi dei clienti per WOLFF KIT #26520
Numero di punteggi: 5
Da brownells.com: 5
Punteggio medio: 3,4
3 Springs in 1 Kit(22/10/2009)
3 springs for fine-tuning the 1911,just as advertised
Springs are too long(05/06/2011)
I bought this three pack for my new Springfield TRP. The springs are difficult to install because of their length and once they are installed will not allow the hammer to be cocked because the springs stacks and will not compress any more. I'm not sure if this Springfield hammer spring housing is different, but I doubt it. All three springs are the same length so I don't think Brownell's made a mistake. Bottom line is they are worthless unless you cut them down and I could have done that with the original spring. BTW the original spring is shorter.
"reduced power spring" don't think so!(05/12/2011)
was to replace the old 'reduced power' mainspring by Wilson combat i have--but unfortunately not going to work. first review was right.
Wolff Kit #26520(27/05/2012)
This worked great when I swapped out the ILS mainspring housing to a STD housing. Note. If you have a Springfield this kit will not work. You must change out the factory ILS housing to a more standard colt style. The internal parts are different due to the locking system.
Great product & value(22/11/2012)
All you need to tune action. Right on spec's! Just install each one 'til you get the trigger pull you want. Wollf is on my list of 1911 products!
N. prodotto: 969265200 WOLFF KIT #26520 Parti Fabbricante: 26520 Un kit per permetterti di regolare con precisione le auto elencate per ottenere la più fluida azione doppia e/o singola e un funzionamento corretto. KIT #26520 COLT 1911 & COMMANDER - Contiene 1 ciascuna molla del martello da 19 lb., 20 lb. e 21 lb. La molla di fabbrica è di 23 lb.
29.9EUR929,90 €
*
Tempi di consegna circa 12-16 giorni. 9 pz. nel magazzino USA
Il kit consente di regolare con precisione l'azione doppia e/o singola del Colt 1911 & Commander.
Include molle del martello da 19 lb., 20 lb. e 21 lb., rispetto alla molla di fabbrica da 23 lb.
Adatto per i modelli 1911 Government, Commander e Officers.
Caratteristiche
Adatto per:
1911
Modello:
Commander,Government,Officers
Peso della spedizione: 0,023kgAltezza di spedizione: 18mmLarghezza di spedizione: 89mmLunghezza di spedizione: 170mm
Dettagli dell'elemento
Made in Usa
Operatore economico responsabile secondo il regolamento UE
Brownells
Via Mezzavilla 4
25043 Breno
Italia
service@brownells.it
Migliora la tua Colt 1911 con il kit molla martello WOLFF #26520. ⚙️ Regola l'azione per una performance ottimale!
One kit so you can precisely tune the autos listed for smoothest double and/or single actions' pull and proper functioning.KIT #26520 COLT 1911 & COMMANDER - Contains 1 each 19 lb., 20 lb. and 21 lb. hammer springs. Factory spring is 23 lbs.
Altro...
3 Opzioni di Regolazione in 1
Un kit per permetterti di regolare con precisione le auto elencate per ottenere la più fluida azione doppia e/o singola e un funzionamento corretto. KIT #26520 COLT 1911 & COMMANDER - Contiene 1 ciascuna molla del martello da 19 lb., 20 lb. e 21 lb. La molla di fabbrica è di 23 lb.
Altro...
Punteggi dei clienti per WOLFF KIT #26520
Numero di punteggi: 5
Da brownells.com: 5
Punteggio medio: 3,4
3 Springs in 1 Kit(22/10/2009)
3 springs for fine-tuning the 1911,just as advertised
Springs are too long(05/06/2011)
I bought this three pack for my new Springfield TRP. The springs are difficult to install because of their length and once they are installed will not allow the hammer to be cocked because the springs stacks and will not compress any more. I'm not sure if this Springfield hammer spring housing is different, but I doubt it. All three springs are the same length so I don't think Brownell's made a mistake. Bottom line is they are worthless unless you cut them down and I could have done that with the original spring. BTW the original spring is shorter.
"reduced power spring" don't think so!(05/12/2011)
was to replace the old 'reduced power' mainspring by Wilson combat i have--but unfortunately not going to work. first review was right.
Wolff Kit #26520(27/05/2012)
This worked great when I swapped out the ILS mainspring housing to a STD housing. Note. If you have a Springfield this kit will not work. You must change out the factory ILS housing to a more standard colt style. The internal parts are different due to the locking system.
Great product & value(22/11/2012)
All you need to tune action. Right on spec's! Just install each one 'til you get the trigger pull you want. Wollf is on my list of 1911 products!