Il Carrello è vuoto.

Carrello

Aiuto e contatti

Reso facile

Newsletter

Offerte

Oltre 300.000 clienti - vi ringraziamo!

4,93/5 "Molto buono" (1400+ recensioni)

Oltre 40.000 prodotti per caccia e sport di tiro

RCBS
HAND PRIMING TOOL

076683902009 749005482

The RCBS Hand Priming Tool is tray fed (tray holds 100 primers) and incorporates a patented safety mechanism to separate the primer seating operation from the primer supply in the tray. The tool is contoured to fit comfortably in your hand, and the tool housing is cast metal. Large and small primer seating stems are included. This tool uses RCBS press type shell holders - works best with RCBS brand shellholders.

Altro...

Lo strumento di innesco manuale RCBS è alimentato da un vassoio (il vassoio contiene 100 inneschi) e incorpora un meccanismo di sicurezza brevettato per separare l'operazione di inserimento dell'innesco dalla fornitura nel vassoio. Lo strumento è sagomato per adattarsi comodamente alla tua mano, e la struttura dello strumento è in metallo fuso. Sono inclusi steli per l'inserimento di inneschi grandi e piccoli. Questo strumento utilizza i porta-bossoli a pressione RCBS - funziona al meglio con i porta-bossoli della marca RCBS.

Altro...

Punteggi dei clienti per RCBS HAND PRIMING TOOL

Numero di punteggi: 9
Da brownells.com: 9
Punteggio medio: 3,1

great quality poorly designed (28/10/2010)

great warrantie, good folks to deal with, but this priming tool is the worst design of them all.

PLASTIC COVER OVER PRIMERS GETS LOSE (12/11/2010)

PLASTIC COVER OVER PRIMERS GETS LOSE OVER TIME ,I NEED TO CONTACT RCBS FOR REPLACEMENT .THIS IS A GREAT COMPANY FOR STANDING BEHIND THERE PRODUCTS .

Good tool (09/02/2011)

I've been using this tool for a few years now. I like it a lot. I can fill the disc up with primers, grab a bucket of brass, and an empty bucket. Plop down in the recliner in front of the TV and prime cases all night. Only drawback is that when it was new, I had to keep an eye on my small insert. It had a lip, or burr or something in it that tried to flip the primers over when you went too fast. After a few uses it started working fine though.

Quality tool (07/06/2011)

I have used this for thousands of rounds, and have had very little go wrong with it. It is very robust in build and easy to manipulate. There are only two things with it that I don't like. If you press too hard or too lightly, it will change the seating depth of the primer. Second, is that I had to do a little bit of shaving on both the large and small shell holders to enable the primer seating post to freely pass through the tool. All other things run smoothly.

Great tool (27/02/2012)

This is a "feel" tool. You don't clamp down like its a vise grip.... You play with it a bit and once you learn the "feel" of a properly seated primer....you'll have it down forever.

Not dependable at all (27/03/2012)

This is not a good design at all. It allows the primers to flip over and is a pain to take apart and remove distorted primers. I would not recommend this to a friend.

Best I have used (21/05/2012)

I've loaded thoudands of rounds over the past 10 years using this tool and never had an issue. As others have said this is a finesse tool. You have to use it enough to know when you have properly seated a primer. This tool uses the same shell holders as the press shell holder used to size and seat bullets. At least one of the other tools requires a set of shell holders different from the reloading press.

Very dissapointing... (17/11/2016)

Poor design. Right out of the box the primer rod was binding against the feed for the primer tray. Also, the primers can and do get disoriented in the seating tube which led to distorted primers. This never happened in 30 years of using the lil ol Lee which is the cheapest on the market. I know the obvious question you would be asking me right now and the answer is: I have no idea why.

Shame on RCBS

Solid product (17/02/2017)

I wanted a hand priming tool to prime 338 Lapua Magnum cases. The RCBS universal wouldn't work, my old Lee hand primers wouldn't work, both same trouble the body of the case wouldn't clear the body of the priming unit. This works great. I have had no trouble with primers flipping or orienting sideways, using the same techniques I used with my Lee units. Seating is positive and leverage is adequate. Not quite as definite a "feel" when the primer is fully seated, but works just fine. About the only downside I can see is that to change shell holders you have to disassemble the unit. Not a big deal as it is simple and only takes a minute or two.

Leggi più recensioni su brownells.com

99.9 99.9 1 EUR

N. prodotto: 749005482
RCBS HAND PRIMING TOOL
Parti Fabbricante: 90200 076683902009 Lo strumento di innesco manuale RCBS è alimentato da un vassoio (il vassoio contiene 100 inneschi) e incorpora un meccanismo di sicurezza brevettato per separare l'operazione di inserimento dell'innesco dalla fornitura nel vassoio. Lo strumento è sagomato per adattarsi comodamente alla tua mano, e la struttura dello strumento è in metallo fuso. Sono inclusi steli per l'inserimento di inneschi grandi e piccoli. Questo strumento utilizza i porta-bossoli a pressione RCBS - funziona al meglio con i porta-bossoli della marca RCBS.

99.9 EUR 14 99,90 € *

Tempi di consegna circa 12-16 giorni.
Più di 10 pz. nel magazzino USA

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Top takeaways

Lo strumento di innesco manuale RCBS è dotato di un vassoio che contiene 100 inneschi e un meccanismo di sicurezza brevettato.
È sagomato per adattarsi comodamente alla mano e ha una struttura in metallo fuso, inclusi steli per inneschi grandi e piccoli.
Utilizza i porta-bossoli a pressione RCBS e funziona al meglio con i porta-bossoli della stessa marca.

Caratteristiche

Peso della spedizione: 0,408kg Altezza di spedizione: 43mm Larghezza di spedizione: 122mm Lunghezza di spedizione: 264mm UPC : 076683902009

Dettagli dell'elemento

Made in Usa

Scopri il potente HAND PRIMING TOOL RCBS! 🎯 Progettato per il massimo comfort e sicurezza, include steli per inneschi grandi e piccoli.

Altro...

Punteggi dei clienti per RCBS HAND PRIMING TOOL

Numero di punteggi: 9
Da brownells.com: 9
Punteggio medio: 3,1

great quality poorly designed (28/10/2010)

great warrantie, good folks to deal with, but this priming tool is the worst design of them all.

PLASTIC COVER OVER PRIMERS GETS LOSE (12/11/2010)

PLASTIC COVER OVER PRIMERS GETS LOSE OVER TIME ,I NEED TO CONTACT RCBS FOR REPLACEMENT .THIS IS A GREAT COMPANY FOR STANDING BEHIND THERE PRODUCTS .

Good tool (09/02/2011)

Quality tool (07/06/2011)

Great tool (27/02/2012)

This is a "feel" tool. You don't clamp down like its a vise grip.... You play with it a bit and once you learn the "feel" of a properly seated primer....you'll have it down forever.

Not dependable at all (27/03/2012)

This is not a good design at all. It allows the primers to flip over and is a pain to take apart and remove distorted primers. I would not recommend this to a friend.

Best I have used (21/05/2012)