Il Carrello è vuoto.

Carrello

Aiuto e contatti

Reso facile

Newsletter

Offerte

Oltre 300.000 clienti - vi ringraziamo!

4,93/5 "Molto buono" (1400+ recensioni)

Oltre 40.000 prodotti per caccia e sport di tiro

BROWNELLS
FRONT SIGHT TOOL FOR GLOCK®

050806110700 080001092

Brownells front sight tool for Glocks fits the hex screw found on aftermarket front sights. Fits the opening found on longslide Glocks as well.

SPECS: Steel, 0.250" O.D., 1.63" Length.

Altro...

L'attrezzo per mirino anteriore Brownells per Glock si adatta alla vite esagonale presente sui mirini anteriori aftermarket. Si adatta anche all'apertura presente sui Glock con canna lunga.

SPECIFICHE: Acciaio, diametro 0,250", lunghezza 1,63".

Altro...

Punteggi dei clienti per BROWNELLS FRONT SIGHT TOOL FOR GLOCKS

Numero di punteggi: 10
Da brownells.com: 9
Punteggio medio: 3,7

ottimo++++++ (04/10/2020)

Works on Trijico Front Sight for Walther (13/02/2015)

This tool will also works on the mounting screw for the front Trijicon Night Sight Set for Walther P99 & PPQ. The reason this tool works so well is because it has thin wall to get into the counter-sink hole. It's also very shallow so the screw head bottoms out. This allow you to push on the screw head and start the thread. The price is very reasonable for a tool you may only use once of twice.

Excellent tool. (07/07/2015)

Just used this tool for the first time. Worked like a charm. Perfect fit, sturdy. Only thing I might suggest would be to make it a bit longer to make it easier to hang on to.

Great Tool For the money (19/11/2015)

Very good tool for the job. does exactly what is sates it does and well.

great tool worked perfect! (16/01/2016)

Definitely Works! (16/10/2016)

This deminutive tool works as advertised. However it is not overly user friendly. While the knurled area offers a good grip, I have arthritis in my hands so I expect to be dropping this a lot and without a magnet I won't be able to chase the screw with it. A matching 3/16" punch would make a nice range set. If only this came with a plastic handle that could be slipped over the knurled end when needed.

brownells brand glock front sight tool (02/12/2016)

This tool is a great price, but mediocre in its performance. The shaft diameter does not allow greater torque on the screw head. I ended up using a glock branded front sight tool with the x shaped handle and it proved to be much better. Ok to use in a pinch, but would recommend the glock factory tool for a better more solid install.

Not a good choice (09/03/2017)

Too short! Can't get a grip to remove or install front sights. Good material, just needs to be much longer

Needs to be longer and thinner. (07/09/2017)

This sight tool is too short and barely clears the height of the recoil spring cut out at the front of the slide. The knurling can also scratch the finish because the tool is thicker than it needs to be along the shaft and contacts the metal.

I had to use a socket adapter to generate enough torque to loosen the front sight screw.

Good tool for the price (18/04/2018)

The overall tool is very short and doesn't allow you to get a lot of torque on the part (due to the limited gripping surface). However, since it is only a front sight tool and you're only looking to torque it enough to get the front sight on and off, it's a good tool for the price.

One big downside would be if you're trying to use this tool to get an front sight off that was secured in place with an adhesive, then you will need something to get a better grip. You can still use this tool but you might need a set of channel locks or a vice grip to get that extra torque.

Leggi più recensioni su brownells.com

24.9 24.9 1 EUR

N. prodotto: 080001092
BROWNELLS FRONT SIGHT TOOL FOR GLOCKS 050806110700 L'attrezzo per mirino anteriore Brownells per Glock si adatta alla vite esagonale presente sui mirini anteriori aftermarket. Si adatta anche all'apertura presente sui Glock con canna lunga.

24.9 EUR 22 24,90 € *

Tempi di consegna circa 12-16 giorni.
Più di 10 pz. nel magazzino USA

Caratteristiche: Adatto per: Glock Modello: Universal Handguns

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Caratteristiche

Adatto per: Glock Modello: Universal Handguns Peso della spedizione: 0,014kg Altezza di spedizione: 13mm Larghezza di spedizione: 58mm Lunghezza di spedizione: 102mm UPC : 050806110700

Dettagli dell'elemento

Made in Usa

Operatore economico responsabile secondo il regolamento UE

Brownells
Via Mezzavilla 4
25043 Breno
Italia
service@brownells.it

Scopri l'attrezzo per mirino anteriore Brownells per Glock! 🔧 Perfetto per le tue esigenze di precisione e compatibilità.

Brownells front sight tool for Glocks fits the hex screw found on aftermarket front sights. Fits the opening found on longslide Glocks as well.

SPECS: Steel, 0.250" O.D., 1.63" Length.

Altro...

L'attrezzo per mirino anteriore Brownells per Glock si adatta alla vite esagonale presente sui mirini anteriori aftermarket. Si adatta anche all'apertura presente sui Glock con canna lunga.

SPECIFICHE: Acciaio, diametro 0,250", lunghezza 1,63".

Altro...

Punteggi dei clienti per BROWNELLS FRONT SIGHT TOOL FOR GLOCKS

Numero di punteggi: 10
Da brownells.com: 9
Punteggio medio: 3,7

ottimo++++++ (04/10/2020)

Works on Trijico Front Sight for Walther (13/02/2015)

Excellent tool. (07/07/2015)

Just used this tool for the first time. Worked like a charm. Perfect fit, sturdy. Only thing I might suggest would be to make it a bit longer to make it easier to hang on to.

Great Tool For the money (19/11/2015)

Very good tool for the job. does exactly what is sates it does and well.

great tool worked perfect! (16/01/2016)