Non-marring, Delrin sleeves surround scopes to adapt them to fit bigger-diameter rings. Black, matte finish won t clash with your scope or gun. Reducers are sliced in half for easy, drop-on installation onto virtually any brand of rings in the sizes listed below. Sold as front-and-rear-ring kits.
SPECS: Kit includes front and rear reducer sets. Delrin, matte, black finish.
Altro...
Adatta Anelli Più Grandi Per Tubi Cannocchiale Più Piccoli
Maniche in Delrin non danneggianti circondano i cannocchiali per adattarli a montare su anelli di diametro maggiore. La finitura opaca di colore nero non entra in conflitto con il tuo cannocchiale o arma. I riduttori sono tagliati a metà per una facile installazione a scatto su praticamente qualsiasi marca di anelli nelle dimensioni elencate di seguito. Venduti come kit per anelli anteriori e posteriori.
SPECIFICHE: Il kit include set di riduttori anteriori e posteriori. Delrin, finitura opaca, colore nero.
Altro...
Punteggi dei clienti per BROWNELLS DELRIN RING REDUCER 1" TO 7/8"
Numero di punteggi: 8
Da brownells.com: 8
Punteggio medio: 4,4
good idea but!(02/12/2017)
Idea is good how ever on my 30-06 cooper I was unable to screw it tight enough for the scope not to move forward during recoil.
Not sure how they can improve that.
Works on my setup(26/09/2018)
These are installed in a 30mm Bobro quick detach ring mount holding my Kahles 26mm ZF69 scope. It does take a little more time and attention to detail to "perfectly" align the split ring inserts and scope and keep them aligned while carefully torquing the ring screws. My scope has not shifted in the rings in over four years of use. I cleaned the rings and reducer inserts with denatured alcohol before mounting the scope.
I would buy this product again(22/07/2010)
Used on my Savage 3C and Stevens 56 with the Weaver no 2 side mount base and 1" short ring set. Allows bolt handle clearance when used with a 3/4" scope and holds perfect zero.
Nice product(22/11/2011)
Perfect for installing a 3/4" vintage scope on 1" rings.
OUTSTANDING PRODUCT(30/01/2012)
I used these on a 7/8 inch rifle scope....couldn't find 7/8 inch rings so I just installed these and used one inch rings....outstanding results. I can strongly recommend the product. I installed them on a .30-06 and the rings and mount on the rifle is solid as a rock. You will need to cut off the overlapping excess of the delrin sleeve so make sure you have a sharp knife...you will like the result. Buy it.
Delrin Ring Reducer 1(25/03/2012)
I have a light weight 1970-80? Tasco widefield 2 to 7 power scope which has outstanding clarity mounted to my Winchester 9422M. I broke the original one piece mount off the scope because the screws had become worn and I wanted a better mount. I didnot realize that nobody makes 7/8" scope tube rings that fit a 3/8" dovetail base. The Delrin Ring Reducer will allow me to use a wide range of 1" mounts.
Get Some and Keep Them On Hand(31/10/2009)
These things work perfectly well, and they hold zero. Personally, I just buy all my scopes in 30mm, and then if I want to switch to a 1" scope, I use these with no issues.
worked great(02/01/2014)
I guess in my mind had them as being made of metal. when I opened them i thought dang plastic. BUT. I put them on and they worked great. The material they are made of holds the scope in my mind better than a metal one would anyway. Easy to put in and use and they look good no one even realizes they are there if the check out the scope I have on my AR. I would recommend them to any one who has a scope that wont fit the rings they want to use. They are better than I hoped for.
N. prodotto: 084000092 BROWNELLS DELRIN RING REDUCER 1" TO 7/8"050806021747 Maniche in Delrin non danneggianti circondano i cannocchiali per adattarli a montare su anelli di diametro maggiore. La finitura opaca di colore nero non entra in conflitto con il tuo cannocchiale o arma. I riduttori sono tagliati a metà per una facile installazione a scatto su praticamente qualsiasi marca di anelli nelle dimensioni elencate di seguito. Venduti come kit per anelli anteriori e posteriori.
37.9EUR1237,90 €
*
Tempi di consegna circa 12-16 giorni. Più di 10 pz. nel magazzino USA
Caratteristiche:Dimensioni: 1'' to 7/8''Finitura: Opaco BlackTipo: Delrin
Maniche in Delrin non danneggianti per adattare cannocchiali a montare su anelli di diametro maggiore.
Finitura opaca nera che non entra in conflitto con il cannocchiale o l'arma.
Facile installazione a scatto su qualsiasi marca di anelli nelle dimensioni 1'' to 7/8''.
Caratteristiche
Dimensioni:
1'' to 7/8''
Finitura:
Opaco Black
Tipo:
Delrin
Peso della spedizione: 0,005kgAltezza di spedizione: 28mmLarghezza di spedizione: 76mmLunghezza di spedizione: 142mm
UPC
: 050806021747
Dettagli dell'elemento
Made in Usa
N. prodotto: 084000091 BROWNELLS DELRIN RING REDUCER 30MM TO 1"050806021730 Maniche in Delrin non danneggianti circondano i cannocchiali per adattarli a montare su anelli di diametro maggiore. La finitura opaca di colore nero non entra in conflitto con il tuo cannocchiale o arma. I riduttori sono tagliati a metà per una facile installazione a scatto su praticamente qualsiasi marca di anelli nelle dimensioni elencate di seguito. Venduti come kit per anelli anteriori e posteriori.
38.9EUR938,90 €
*
Tempi di consegna circa 12-16 giorni. 9 pz. nel magazzino USA
Caratteristiche:Dimensioni: 30mm to 1''Finitura: Opaco BlackTipo: Delrin
N. prodotto: 084000093 BROWNELLS DELRIN RING REDUCER 1" TO 3/4"050806021754 Maniche in Delrin non danneggianti circondano i cannocchiali per adattarli a montare su anelli di diametro maggiore. La finitura opaca di colore nero non entra in conflitto con il tuo cannocchiale o arma. I riduttori sono tagliati a metà per una facile installazione a scatto su praticamente qualsiasi marca di anelli nelle dimensioni elencate di seguito. Venduti come kit per anelli anteriori e posteriori.
36.9EUR3736,90 €
*
Tempi di consegna circa 12-16 giorni. Più di 10 pz. nel magazzino USA
Caratteristiche:Dimensioni: 1'' to 3/4''Finitura: Opaco BlackTipo: Delrin
N. prodotto: 084000094 BROWNELLS DELRIN RING REDUCER 30MM TO 26MM050806021761 Maniche in Delrin non danneggianti circondano i cannocchiali per adattarli a montare su anelli di diametro maggiore. La finitura opaca di colore nero non entra in conflitto con il tuo cannocchiale o arma. I riduttori sono tagliati a metà per una facile installazione a scatto su praticamente qualsiasi marca di anelli nelle dimensioni elencate di seguito. Venduti come kit per anelli anteriori e posteriori.
36.9EUR736,90 €
*
Tempi di consegna circa 12-16 giorni. 7 pz. nel magazzino USA
Caratteristiche:Dimensioni: 30mm to 26mmFinitura: Opaco BlackTipo: Delrin
Non-marring, Delrin sleeves surround scopes to adapt them to fit bigger-diameter rings. Black, matte finish won t clash with your scope or gun. Reducers are sliced in half for easy, drop-on installation onto virtually any brand of rings in the sizes listed below. Sold as front-and-rear-ring kits.
SPECS: Kit includes front and rear reducer sets. Delrin, matte, black finish.
Altro...
Adatta Anelli Più Grandi Per Tubi Cannocchiale Più Piccoli
Maniche in Delrin non danneggianti circondano i cannocchiali per adattarli a montare su anelli di diametro maggiore. La finitura opaca di colore nero non entra in conflitto con il tuo cannocchiale o arma. I riduttori sono tagliati a metà per una facile installazione a scatto su praticamente qualsiasi marca di anelli nelle dimensioni elencate di seguito. Venduti come kit per anelli anteriori e posteriori.
SPECIFICHE: Il kit include set di riduttori anteriori e posteriori. Delrin, finitura opaca, colore nero.
Altro...
Punteggi dei clienti per BROWNELLS DELRIN RING REDUCER 1" TO 7/8"
Numero di punteggi: 8
Da brownells.com: 8
Punteggio medio: 4,4
good idea but!(02/12/2017)
Idea is good how ever on my 30-06 cooper I was unable to screw it tight enough for the scope not to move forward during recoil.
Not sure how they can improve that.
Works on my setup(26/09/2018)
These are installed in a 30mm Bobro quick detach ring mount holding my Kahles 26mm ZF69 scope. It does take a little more time and attention to detail to "perfectly" align the split ring inserts and scope and keep them aligned while carefully torquing the ring screws. My scope has not shifted in the rings in over four years of use. I cleaned the rings and reducer inserts with denatured alcohol before mounting the scope.
I would buy this product again(22/07/2010)
Used on my Savage 3C and Stevens 56 with the Weaver no 2 side mount base and 1" short ring set. Allows bolt handle clearance when used with a 3/4" scope and holds perfect zero.
Nice product(22/11/2011)
Perfect for installing a 3/4" vintage scope on 1" rings.
OUTSTANDING PRODUCT(30/01/2012)
I used these on a 7/8 inch rifle scope....couldn't find 7/8 inch rings so I just installed these and used one inch rings....outstanding results. I can strongly recommend the product. I installed them on a .30-06 and the rings and mount on the rifle is solid as a rock. You will need to cut off the overlapping excess of the delrin sleeve so make sure you have a sharp knife...you will like the result. Buy it.
Delrin Ring Reducer 1(25/03/2012)
I have a light weight 1970-80? Tasco widefield 2 to 7 power scope which has outstanding clarity mounted to my Winchester 9422M. I broke the original one piece mount off the scope because the screws had become worn and I wanted a better mount. I didnot realize that nobody makes 7/8" scope tube rings that fit a 3/8" dovetail base. The Delrin Ring Reducer will allow me to use a wide range of 1" mounts.
Get Some and Keep Them On Hand(31/10/2009)
These things work perfectly well, and they hold zero. Personally, I just buy all my scopes in 30mm, and then if I want to switch to a 1" scope, I use these with no issues.
worked great(02/01/2014)
I guess in my mind had them as being made of metal. when I opened them i thought dang plastic. BUT. I put them on and they worked great. The material they are made of holds the scope in my mind better than a metal one would anyway. Easy to put in and use and they look good no one even realizes they are there if the check out the scope I have on my AR. I would recommend them to any one who has a scope that wont fit the rings they want to use. They are better than I hoped for.