Easily Reaches & Removes Bushing Without Damaging It
Fits over ejector rod and down into the cylinder to reach and remove the Crane Bushing from Colt revolvers. Fits Colt Python, Trooper, Officers' Model, Official Police, Marshall, Cobra, Agent, Police Positive, Detective Special and Pocket Positive.
SPECS: Steel, hardened and drawn. Body is 1-3/8" (3.5cm) long, .316 in (8.03mm) diameter. Handle is 2" (5.1cm) long.
Altro...
Raggiunge e Rimuove Facilmente il Bushing Senza Danneggiarlo
Si adatta sopra l'asta di espulsione e scende nel cilindro per raggiungere e rimuovere il Crane Bushing dai revolver Colt. Compatibile con Colt Python, Trooper, Officers' Model, Official Police, Marshall, Cobra, Agent, Police Positive, Detective Special e Pocket Positive.
SPECIFICHE: Acciaio, temprato e trafilato. Corpo lungo 1-3/8" (3,5 cm), diametro .316 pollici (8,03 mm). Manico lungo 2" (5,1 cm).
Altro...
Punteggi dei clienti per BROWNELLS CRANE BUSHING TOOL
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 3,3
Works Great(07/06/2014)
This tool removed the bushing screw with ease on my Colt Det Spl. Just be careful when the bushing is almost out that it doesn't fly across the room under the spring tension. You will never find it once it rockets across the room!
Also fits Colt New Service revolvers(02/09/2014)
I was pleasantly surprised to discover that this tool also fits the crane bushings of Colt New Service revolvers. A well made tool but it has its limitations, a corroded bushing that is stuck in the crane will break the tool. You can however easily file down the shoulder of the tool and expose new "teeth".
Weak(06/01/2018)
Broke on first use. Tang bent, then broke. Old gun but clean, no rust but soaked in pb blaster overnight specifically because other review said it broke but it broke anyway and marred the bushing.
N. prodotto: 080654000 BROWNELLS CRANE BUSHING TOOL050806106550 Si adatta sopra l'asta di espulsione e scende nel cilindro per raggiungere e rimuovere il Crane Bushing dai revolver Colt. Compatibile con Colt Python, Trooper, Officers' Model, Official Police, Marshall, Cobra, Agent, Police Positive, Detective Special e Pocket Positive.
48.9EUR348,90 €
*
Tempi di consegna circa 12-16 giorni. 3 pz. nel magazzino USA
Il COLT CRANE BUSHING TOOL è compatibile con vari modelli di revolver Colt, tra cui Python, Trooper e Detective Special.
Realizzato in acciaio temprato e trafilato, con un corpo lungo 1-3/8" e un manico lungo 2".
Prodotto da BROWNELLS, è classificato come chiave per estrazioni universale per pistole.
Caratteristiche
Adatto per:
Universal Handguns
Peso della spedizione: 0,045kgAltezza di spedizione: 10mmLarghezza di spedizione: 81mmLunghezza di spedizione: 155mm
UPC
: 050806106550
Dettagli dell'elemento
Made in Usa
Scopri il COLT CRANE BUSHING TOOL di BROWNELLS! 🔧 Rimuovi facilmente il Crane Bushing dai revolver Colt. Compatibile con vari modelli.
Easily Reaches & Removes Bushing Without Damaging It
Fits over ejector rod and down into the cylinder to reach and remove the Crane Bushing from Colt revolvers. Fits Colt Python, Trooper, Officers' Model, Official Police, Marshall, Cobra, Agent, Police Positive, Detective Special and Pocket Positive.
SPECS: Steel, hardened and drawn. Body is 1-3/8" (3.5cm) long, .316 in (8.03mm) diameter. Handle is 2" (5.1cm) long.
Altro...
Raggiunge e Rimuove Facilmente il Bushing Senza Danneggiarlo
Si adatta sopra l'asta di espulsione e scende nel cilindro per raggiungere e rimuovere il Crane Bushing dai revolver Colt. Compatibile con Colt Python, Trooper, Officers' Model, Official Police, Marshall, Cobra, Agent, Police Positive, Detective Special e Pocket Positive.
SPECIFICHE: Acciaio, temprato e trafilato. Corpo lungo 1-3/8" (3,5 cm), diametro .316 pollici (8,03 mm). Manico lungo 2" (5,1 cm).
Altro...
Punteggi dei clienti per BROWNELLS CRANE BUSHING TOOL
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 3,3
Works Great(07/06/2014)
This tool removed the bushing screw with ease on my Colt Det Spl. Just be careful when the bushing is almost out that it doesn't fly across the room under the spring tension. You will never find it once it rockets across the room!
Also fits Colt New Service revolvers(02/09/2014)
I was pleasantly surprised to discover that this tool also fits the crane bushings of Colt New Service revolvers. A well made tool but it has its limitations, a corroded bushing that is stuck in the crane will break the tool. You can however easily file down the shoulder of the tool and expose new "teeth".
Weak(06/01/2018)
Broke on first use. Tang bent, then broke. Old gun but clean, no rust but soaked in pb blaster overnight specifically because other review said it broke but it broke anyway and marred the bushing.