Il Carrello è vuoto.

Carrello

Aiuto e contatti

Reso facile

Newsletter

Offerte

Oltre 300.000 clienti - vi ringraziamo!

4,93/5 "Molto buono" (1400+ recensioni)

Oltre 40.000 prodotti per caccia e sport di tiro

CORE RIFLE SYSTEMS
AR-15/M16 BILLET CHARGING HANDLES

608938410832 100012332

Machined Billet Charging Handle Gives Strength & Consistent Tolerances

Machined from a solid aluminum billet, charging handle drops in to standard AR-15/M16 uppers to offer exceptional strength and extremely consistent tolerances. Hardcoat anodized to resist wear and corrosion.

SPECS: Machined billet 6061 T6 aluminum, hardcoat anodized matte black. 6 7/8"(17.5cm) long. V1 latch .56" (1.4cm) long.

Altro...

Leva di Armamento Billet Lavorata per Resistenza e Tolleranze Costanti

Realizzato da un solido blocco di alluminio, l'AR-15/M16 BILLET CHARGING HANDLE si inserisce facilmente negli upper standard AR-15/M16 per offrire un'eccellente resistenza e tolleranze estremamente consistenti. Anodizzato hardcoat per resistere all'usura e alla corrosione.

SPECIFICHE: Realizzato in billetta di alluminio 6061 T6 lavorato, anodizzato hardcoat nero opaco. Lunghezza 6 7/8"(17,5cm). Sgancio V1 lungo .56" (1,4cm).

Altro...

Punteggi dei clienti per CORE RIFLE SYSTEMS BILLET CHARGING HANDLE

Numero di punteggi: 7
Da brownells.com: 7
Punteggio medio: 2,9

I have purchased several quality product (19/11/2016)

Not Within Specs (23/02/2014)

This charging handle is not in specs. Installed the part and it drags and snags in a few places. Pulled the charging handle to the rear maybe 10 times and the aluminum is already showing through on top of the charging handle as well as underneath to the read of the charging handle. I tried two other charging handles including a stock one that came with another AR and a BCM Gunfighter and neither had any problems in the upper.

Good quality changing handle for the mon (03/11/2016)

I noticed an old negative review on this product. I have used Core changing handles for quite a while on my custom builds. Good product no problems. Their extended model is a good value and I am purchasing a few more.

Didn't fit (16/11/2013)

The product quality and finish looked fine. However, the charging handle didn't fit in 2 out my 3 uppers. I bought it for use in a Stag Lefty upper as part of a build I'm doing for my wife. It didn't fit in there, so I tried swapping it out with one from my 20" Del Ton, where it also did not fit. I ended up swapping the charging handle from my LWRC M6A2, and it seems to work in there. Other than the fit issues, the handle appears to be well made. It didn't appear bent or otherwise compromised. I don't know if the bolt key channels in those particular uppers are a bit tight or what, but I made it work by shifting parts around, though I would have preferred to keep parts where they were, because I know they worked the way they were. I doubt this charging handle will compromise the reliabilty of the LWRC, but if it does, I'll use it to weigh my garbage can down.

Good Quality Charging Handle (16/12/2013)

Fits Perfecly In My Delton Receiver..Good Quality And The Finish Is Perfect..Best Of All Made In The USA...

Rough (21/04/2014)

The anodized finish is rough. The latch has a sharp edge that does not easily engage the upper. The latch spring is stronger than it needs to be. The latch does not easily disengage when pulling the charging handle back. I returned this charging handle.

Core Billet Charging Handle (02/07/2015)

This is by far the worst changing handle I have ever purchased. I will return for a full refund the quality is just not there. The charging handle was poorly machined rough and as sharp as you can get.

Leggi più recensioni su brownells.com

0 0 1 EUR

N. prodotto: 100012332
CORE RIFLE SYSTEMS BILLET CHARGING HANDLE
Parti Fabbricante: 1856 608938410832 Realizzato da un solido blocco di alluminio, l'AR-15/M16 BILLET CHARGING HANDLE si inserisce facilmente negli upper standard AR-15/M16 per offrire un'eccellente resistenza e tolleranze estremamente consistenti. Anodizzato hardcoat per resistere all'usura e alla corrosione.

Avvisa quando diventa disponibile

Non disponibile.

Caratteristiche: Adatto per: AR-15 Finitura: Nero Mano: Destro

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Top takeaways

Realizzato in billetta di alluminio 6061 T6, l'AR-15/M16 BILLET CHARGING HANDLE offre resistenza e tolleranze consistenti.
Finitura anodizzata hardcoat nero opaco per resistere all'usura e alla corrosione.
Compatibile con AR-15 e progettato per l'uso con la mano destra.

Caratteristiche

Adatto per: AR-15 Finitura: Nero Mano: Destro Peso della spedizione: 0,045kg Altezza di spedizione: 13mm Larghezza di spedizione: 76mm Lunghezza di spedizione: 218mm UPC : 608938410832

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.x

Operatore economico responsabile secondo il regolamento UE

Brownells
Via Mezzavilla 4
25043 Breno
Italia
service@brownells.it

Scopri l'AR-15/M16 BILLET CHARGING HANDLE di CORE RIFLE SYSTEMS, resistente e anodizzato per una lunga durata! 🔧 Adatto per AR-15.

Machined Billet Charging Handle Gives Strength & Consistent Tolerances

SPECS: Machined billet 6061 T6 aluminum, hardcoat anodized matte black. 6 7/8"(17.5cm) long. V1 latch .56" (1.4cm) long.

Altro...

Leva di Armamento Billet Lavorata per Resistenza e Tolleranze Costanti

SPECIFICHE: Realizzato in billetta di alluminio 6061 T6 lavorato, anodizzato hardcoat nero opaco. Lunghezza 6 7/8"(17,5cm). Sgancio V1 lungo .56" (1,4cm).

Altro...