Il Carrello è vuoto.

Carrello

Aiuto e contatti

Reso facile

Newsletter

Offerte

Oltre 300.000 clienti - vi ringraziamo!

4,93/5 "Molto buono" (1400+ recensioni)

Oltre 40.000 prodotti per caccia e sport di tiro

WILSON COMBAT
#321 S&W J FRAME SPRING KIT

874218000943 965321000

Add Reliability, Improve Function

High quality springs drop-in to improve handgun performance. High tensile strength wire delivers reliable function. #321 S&W J Frame Spring Kit - RP 8 lb hammer spring; RP 13, 14 & 15 lb rebound springs.

SPECS: RP = Reduced Power, XP = Extra Power.

Altro...

Aumenta l'Affidabilità, Migliora la Funzione

Molle di alta qualità da inserire per migliorare le prestazioni della pistola. Filo ad alta resistenza a trazione garantisce una funzione affidabile. #321 S&W J Frame Spring Kit - molla del martello RP 8 lb; molle di ritorno RP 13, 14 & 15 lb.

SPECS: RP = Potenza Ridotta, XP = Potenza Extra.

Altro...

Punteggi dei clienti per WILSON COMBAT WILSON KIT # 321

Numero di punteggi: 7
Da brownells.com: 7
Punteggio medio: 4,6

It's OK. (04/01/2011)

The hammer spring installed fine. But the 13# rebound spring was too long to install. Which I don't understand. Emailed Wilson Combat for advice with no success. Had to settle for the 14# spring instead.....good thing there were three choices huh? Trigger pull was marginally lighter but very rough.

Worked great (08/04/2011)

Unlike a previous reviewer I phoned Wilson about the too-long trigger return springs. They said that was on purpose as different age J frames may have different length springs. They said cut them to the length of the factory spring you remove. If you don't have a lathe to make one you should buy one of the two trigger return spring installation tools sold by Brownell's. Buying this kit doesn't make you a gunsmith. I also reccomend the Jerry Miculec trigger job video from Brownell's.

Worked fine for me!!! (26/02/2012)

http://www.youtube.com/watch?v=JIUfmg1JulE was a good video showing me how to do this. I would recommend using some grease this makes the re-assembly much better

Well worth the money (16/03/2012)

If you know what your doing, your can drastically change the trigger pull. This is definitely not a first timers project. If you have done gunsmithing previous, these springs with the appropiate polishing will definitely enhance the trigger pull.

First Timers Can Install This Kit (16/03/2013)

First timers will have no problems installing these springs if they follow the procedures shown in several online videos. No special tools required. Using only a 1/8" wide flat tipped screwdriver had no issues with either the hammer spring or 13# rebound slide spring during installation into my model 042. Neither spring required cutting. As a precaution against a flyaway slide spring, looped waxed dental floss through the OEM spring and tied off to trigger guard prior to spring removal. Did a similar thing with the replacement spring prior to installation. Once the spring is installed, the waxed floss easily pulls free. Reduced trigger pull by 1#-14.0 oz down to 9#-3.5 oz.

Wife would not shoot S&W Mod.60 without. (04/02/2016)

Was looking to buy another revolver for the Wife until I installed

the hammer spring and the middle trigger return spring in my S&W Model 60. Friends now want the kit for their J frame.

Wilson Combat - the revolver experts? (26/08/2016)

I didn't, and doubt that most shooters think of Wilson Combat as revolver experts. Think again. I installed their spring kit for S&W J Frame in my Model 37. Before: 12+ lb. double action, 5 lb. single action pull. After: 8.5 lb. double and 3 lb. single action, testing 100% reliable ignition with 5 different loads from 4 different brands of factory ammo, tested double and single action! Easily installed after watching some Youtube instructional videos. The only special tool I recommend is the inexpensive S&W trigger return spring tool from Brownells. I installed the hammer spring and the lightest of the trigger return springs, which functions just fine. Pretty much same story with the Wilson K/L/N Frame spring kit in my Model 10.

Leggi più recensioni su brownells.com

22.9 22.9 1 EUR

N. prodotto: 965321000
WILSON COMBAT WILSON KIT # 321
Parti Fabbricante: 321 874218000943 Molle di alta qualità da inserire per migliorare le prestazioni della pistola. Filo ad alta resistenza a trazione garantisce una funzione affidabile. #321 S&W J Frame Spring Kit - molla del martello RP 8 lb; molle di ritorno RP 13, 14 & 15 lb.

22.9 EUR 3 22,90 € *

Tempi di consegna circa 12-16 giorni.
3 pz. nel magazzino USA

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Caratteristiche

Peso della spedizione: 0,009kg Larghezza di spedizione: 83mm Lunghezza di spedizione: 146mm UPC : 874218000943

Dettagli dell'elemento

Made in Usa

Migliora le prestazioni della tua pistola con il #321 S&W J Frame Spring Kit di Wilson Combat! 🔧 Molle di alta qualità per una funzione affidabile.

Add Reliability, Improve Function

SPECS: RP = Reduced Power, XP = Extra Power.

Altro...

Aumenta l'Affidabilità, Migliora la Funzione

SPECS: RP = Potenza Ridotta, XP = Potenza Extra.

Altro...

Punteggi dei clienti per WILSON COMBAT WILSON KIT # 321

Numero di punteggi: 7
Da brownells.com: 7
Punteggio medio: 4,6

It's OK. (04/01/2011)

Worked great (08/04/2011)

Worked fine for me!!! (26/02/2012)

http://www.youtube.com/watch?v=JIUfmg1JulE was a good video showing me how to do this. I would recommend using some grease this makes the re-assembly much better

Well worth the money (16/03/2012)

First Timers Can Install This Kit (16/03/2013)

Wife would not shoot S&W Mod.60 without. (04/02/2016)

Was looking to buy another revolver for the Wife until I installed

the hammer spring and the middle trigger return spring in my S&W Model 60. Friends now want the kit for their J frame.

Wilson Combat - the revolver experts? (26/08/2016)

Leggi più recensioni su brownells.com