Design Enhancements For Superior Performance; Standard & Ambidextrous Models
Novak takes the 1911 safety a step further with streamlined styling and several operating enhancements. A re-designed detent enables extremely positive engagement and helps hold the plunger tube against the frame to keep it from working loose. The right-hand paddle on the ambidextrous model is keyed and pinned to the shaft to prevent flex and eliminate the need for the grip to hold the right lever in place. It also permits a much slimmer paddle that works with any grip, including LaserGrips. Completely “carry beveled” with all sharp edges removed for shooter comfort and control.
SPECS: Carbon steel, blued, or stainless steel, natural finish. Fitting required for installation. Gunsmith installation recommended.
Altro...
Miglioramenti Progettuali per Prestazioni Superiori; Modelli Standard e Ambidestri
Novak porta la sicura della 1911 a un livello superiore con uno stile semplificato e diversi miglioramenti funzionali. Un detent ridisegnato garantisce un innesto estremamente positivo e aiuta a mantenere il tubo del percussore contro la cornice per impedirne l'allentamento. La paletta destra sul modello ambidestro è chiavistellata e fissata all'asse per prevenire la flessione e eliminare la necessità che l'impugnatura mantenga in posizione la leva destra. Questo permette anche una paletta molto più sottile che funziona con qualsiasi impugnatura, inclusi i LaserGrips. Completamente "smussata per il porto" con tutti i bordi taglienti rimossi per il comfort e il controllo del tiratore.
SPECIFICHE: Acciaio al carbonio, bluato, o acciaio inossidabile, finitura naturale. È richiesto un adattamento per l'installazione. Si raccomanda l'installazione da parte di un armaiolo.
Altro...
Punteggi dei clienti per NOVAK AMBIDEXTROUS NXT SAFETY, STAINLESS
Numero di punteggi: 8
Da brownells.com: 8
Punteggio medio: 3,4
Novak NXT ambi excellent(27/04/2015)
Excellent product however the description works with laser grips is not 100% accurate. Some grips have the laser module reduced but I found it necessary to trim the right side lever to clear the laser on my older CT laser grips.
It does not say in the product description, but you will need a 1/16" roll pin starter and a 1/16" roll pin punch to secure the right side lever. Only one roll pin ships with the package 1/16x 0.270, not a size listed in the roll pin section of the catalog. Order some spare roll pins.
The ambi safety functions just fine as a single side and I suggest that you fit and used the safety for a while before pinning the final assembly. I could have saved a lot of money if I'd bought the Novak safety before a less expensive ambi safety.
instrutions should be included.(27/04/2013)
just like a kid, i was so excited to get my package today. it looked even better than expected. i mean, man, great part. this was the most expensive one yet, and i would rate a 5 easily if some one had included a how to get the tiny little pin in the tiny little hole to fasten the right side! what a pain! finally had it launch so far off the table i dont think i will EVER find it. so one nice pistole in my collection is gonna be out of commishion till i find a replacement and a clue on how to get finished. i mean come on! could they make one end slightly smaller so we can get it started?
uncomfortable for lefties(08/09/2016)
If you are lefthanded and shoot with your thumb on the safety this is not the safety for you. It is very uncomfortable. My gunsmith fit it to my 1911 so I can not send it back.
matte not stainless(01/11/2012)
in the description it states stainless steel but it is powered coat a dull grey. did not fit kimber custom II
This extended safety is a winner.(10/11/2012)
This extended thumb safety fills the niche for tactical or competition shooting. It requires gunsmith fitting as the sear contact ledge is oversized to fit to your specific gun. The dimensions and specs are absolutely precise with the contact points and pin axis aligned perfectly. After fitting, there was no slack or bounce while gripping the pistol.
Some tips: You might need to lightly bevel the safety's lug corner radius at the channel - so it won't shave your frame cutout. You can blend the corners of the safety with your Dremel to match your frame and beavertail. The polished surfaces contrast nicely with the matte finish.
Ambidextrous safeties are okay for many shooters, but this single side safety fits my shooting grip with better ergonomics. It allows a lower bore axis and more solid shooting platform without that weak-side safety lever pressing into your metacarpo-phalangeal joint.
The precision of manufacture is impressive. This part is even better than the King's Safety of years past.
Bravo, Novak.
Why did I order two?? (21/03/2016)
That was a mistake. First, my "stainless" safety came with a powder coated dark gray paint on it which took an hour to sand off with #320 paper. The sear lug had enough meat on it for proper fitting so that was OK. The problem with this unit is the profile at the front edge just below the detent for the plunger. It is cut back too far allowing the tip of the plunger to extend out of the plunger tube too far. Comparing it to my safeties from Colt, Dan Wesson and EGW the difference is obvious. In time, the over-extended plunger will oval out the end of the plunger tube. Not a problem if you have spare plunger tubes and a staking tool. But why bother. I'll stick with the EGW.
Perfect(25/10/2012)
Switched out an ambi safety on my Springfield duty gun. I had also ordered an Ed Brown tactical safety which paled in comparison, both in finish and function. Paddle is a nice medium size. Design keeps the safety from rubbing the frame. Detent is is secure; I polished the plunger for smooth movement. Finish perfect for a parkerized pistol, would be dull on a blued one.
Novak NXT Safety(31/03/2018)
I installed this safety in a Springfield Mil-Spec that I am tinkering with. I bought it because its a Novak part and I've had good luck with Novak's stuff. I am impressed with the attention to detail. No rough edges or points, no tooling marks or seams and the finish is even and smooth. The thumb pad is very comfortable with a thumb over safety grip. And the best part is the detents at the "off" and "on" position are very positive. No extra movement at all. It "snicks" like an old Colt safety. Finding all these plusses together is often a hard thing to do. So far, the only drawback I can see is that I now have a bunch of 1911s that are in need of one of these.
N. prodotto: 662000106 NOVAK AMBIDEXTROUS NXT SAFETY, STAINLESS Parti Fabbricante: N1911TSAMBSS Novak porta la sicura della 1911 a un livello superiore con uno stile semplificato e diversi miglioramenti funzionali. Un detent ridisegnato garantisce un innesto estremamente positivo e aiuta a mantenere il tubo del percussore contro la cornice per impedirne l'allentamento. La paletta destra sul modello ambidestro è chiavistellata e fissata all'asse per prevenire la flessione e eliminare la necessità che l'impugnatura mantenga in posizione la leva destra. Questo permette anche una paletta molto più sottile che funziona con qualsiasi impugnatura, inclusi i LaserGrips. Completamente "smussata per il porto" con tutti i bordi taglienti rimossi per il comfort e il controllo del tiratore.
144.9EUR5144,90 €
*
Tempi di consegna circa 12-16 giorni. 5 pz. nel magazzino USA
Caratteristiche:Adatto per: 1911Finitura: Acciaio inoxMano: AmbidestroModello: Government, Commander, OfficersTipo: Thumb
La sicura Novak per 1911 è migliorata con un detent ridisegnato per un innesto positivo e una maggiore stabilità del tubo del percussore.
La paletta destra sul modello ambidestro è fissata all'asse, eliminando la flessione e permettendo una paletta più sottile compatibile con tutte le impugnature, inclusi i LaserGrips.
Completamente "smussata per il porto" con bordi taglienti rimossi per un maggiore comfort e controllo del tiratore.
Caratteristiche
Adatto per:
1911
Finitura:
Acciaio inox
Mano:
Ambidestro
Modello:
Commander,Government,Officers
Tipo:
Thumb
Peso della spedizione: 0,136kgAltezza di spedizione: 1mmLarghezza di spedizione: 53mmLunghezza di spedizione: 102mm
Dettagli dell'elemento
Made in Usa
Classificazione per l'export dagli US: 0A501.x
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
N. prodotto: 662000103 NOVAK NXT SAFETY, BLUED Parti Fabbricante: N1911TSBN1911TS-BLUE Novak porta la sicura della 1911 a un livello superiore con uno stile semplificato e diversi miglioramenti funzionali. Un detent ridisegnato garantisce un innesto estremamente positivo e aiuta a mantenere il tubo del percussore contro la cornice per impedirne l'allentamento. La paletta destra sul modello ambidestro è chiavistellata e fissata all'asse per prevenire la flessione e eliminare la necessità che l'impugnatura mantenga in posizione la leva destra. Questo permette anche una paletta molto più sottile che funziona con qualsiasi impugnatura, inclusi i LaserGrips. Completamente "smussata per il porto" con tutti i bordi taglienti rimossi per il comfort e il controllo del tiratore.
84.9EUR184,90 €
*
Tempi di consegna circa 12-16 giorni. 1 pz. nel magazzino USA
Caratteristiche:Adatto per: 1911Finitura: BluedMano: DestroModello: Government, Commander, OfficersTipo: Thumb
N. prodotto: 662000104 NOVAK NXT SAFETY, STAINLESS Parti Fabbricante: N1911TS-SS Novak porta la sicura della 1911 a un livello superiore con uno stile semplificato e diversi miglioramenti funzionali. Un detent ridisegnato garantisce un innesto estremamente positivo e aiuta a mantenere il tubo del percussore contro la cornice per impedirne l'allentamento. La paletta destra sul modello ambidestro è chiavistellata e fissata all'asse per prevenire la flessione e eliminare la necessità che l'impugnatura mantenga in posizione la leva destra. Questo permette anche una paletta molto più sottile che funziona con qualsiasi impugnatura, inclusi i LaserGrips. Completamente "smussata per il porto" con tutti i bordi taglienti rimossi per il comfort e il controllo del tiratore.
109.9EUR3109,90 €
*
Tempi di consegna circa 12-16 giorni. 3 pz. nel magazzino USA
Caratteristiche:Adatto per: 1911Finitura: Acciaio inoxMano: DestroModello: Government, Commander, OfficersTipo: Thumb
N. prodotto: 662000105 NOVAK AMBIDEXTROUS NXT SAFETY, BLUED Parti Fabbricante: N1911TS-AMB-B Novak porta la sicura della 1911 a un livello superiore con uno stile semplificato e diversi miglioramenti funzionali. Un detent ridisegnato garantisce un innesto estremamente positivo e aiuta a mantenere il tubo del percussore contro la cornice per impedirne l'allentamento. La paletta destra sul modello ambidestro è chiavistellata e fissata all'asse per prevenire la flessione e eliminare la necessità che l'impugnatura mantenga in posizione la leva destra. Questo permette anche una paletta molto più sottile che funziona con qualsiasi impugnatura, inclusi i LaserGrips. Completamente "smussata per il porto" con tutti i bordi taglienti rimossi per il comfort e il controllo del tiratore.
169.9EUR2169,90 €
*
Tempi di consegna circa 12-16 giorni. 2 pz. nel magazzino USA
Caratteristiche:Adatto per: 1911Finitura: BluedMano: AmbidestroModello: Government, Commander, OfficersTipo: Thumb
Design Enhancements For Superior Performance; Standard & Ambidextrous Models
Novak takes the 1911 safety a step further with streamlined styling and several operating enhancements. A re-designed detent enables extremely positive engagement and helps hold the plunger tube against the frame to keep it from working loose. The right-hand paddle on the ambidextrous model is keyed and pinned to the shaft to prevent flex and eliminate the need for the grip to hold the right lever in place. It also permits a much slimmer paddle that works with any grip, including LaserGrips. Completely “carry beveled” with all sharp edges removed for shooter comfort and control.
SPECS: Carbon steel, blued, or stainless steel, natural finish. Fitting required for installation. Gunsmith installation recommended.
Altro...
Miglioramenti Progettuali per Prestazioni Superiori; Modelli Standard e Ambidestri
Novak porta la sicura della 1911 a un livello superiore con uno stile semplificato e diversi miglioramenti funzionali. Un detent ridisegnato garantisce un innesto estremamente positivo e aiuta a mantenere il tubo del percussore contro la cornice per impedirne l'allentamento. La paletta destra sul modello ambidestro è chiavistellata e fissata all'asse per prevenire la flessione e eliminare la necessità che l'impugnatura mantenga in posizione la leva destra. Questo permette anche una paletta molto più sottile che funziona con qualsiasi impugnatura, inclusi i LaserGrips. Completamente "smussata per il porto" con tutti i bordi taglienti rimossi per il comfort e il controllo del tiratore.
SPECIFICHE: Acciaio al carbonio, bluato, o acciaio inossidabile, finitura naturale. È richiesto un adattamento per l'installazione. Si raccomanda l'installazione da parte di un armaiolo.
Altro...
Punteggi dei clienti per NOVAK AMBIDEXTROUS NXT SAFETY, STAINLESS
Numero di punteggi: 8
Da brownells.com: 8
Punteggio medio: 3,4
Novak NXT ambi excellent(27/04/2015)
Excellent product however the description works with laser grips is not 100% accurate. Some grips have the laser module reduced but I found it necessary to trim the right side lever to clear the laser on my older CT laser grips.
It does not say in the product description, but you will need a 1/16" roll pin starter and a 1/16" roll pin punch to secure the right side lever. Only one roll pin ships with the package 1/16x 0.270, not a size listed in the roll pin section of the catalog. Order some spare roll pins.
The ambi safety functions just fine as a single side and I suggest that you fit and used the safety for a while before pinning the final assembly. I could have saved a lot of money if I'd bought the Novak safety before a less expensive ambi safety.
instrutions should be included.(27/04/2013)
just like a kid, i was so excited to get my package today. it looked even better than expected. i mean, man, great part. this was the most expensive one yet, and i would rate a 5 easily if some one had included a how to get the tiny little pin in the tiny little hole to fasten the right side! what a pain! finally had it launch so far off the table i dont think i will EVER find it. so one nice pistole in my collection is gonna be out of commishion till i find a replacement and a clue on how to get finished. i mean come on! could they make one end slightly smaller so we can get it started?
uncomfortable for lefties(08/09/2016)
If you are lefthanded and shoot with your thumb on the safety this is not the safety for you. It is very uncomfortable. My gunsmith fit it to my 1911 so I can not send it back.
matte not stainless(01/11/2012)
in the description it states stainless steel but it is powered coat a dull grey. did not fit kimber custom II
This extended safety is a winner.(10/11/2012)
This extended thumb safety fills the niche for tactical or competition shooting. It requires gunsmith fitting as the sear contact ledge is oversized to fit to your specific gun. The dimensions and specs are absolutely precise with the contact points and pin axis aligned perfectly. After fitting, there was no slack or bounce while gripping the pistol.
Some tips: You might need to lightly bevel the safety's lug corner radius at the channel - so it won't shave your frame cutout. You can blend the corners of the safety with your Dremel to match your frame and beavertail. The polished surfaces contrast nicely with the matte finish.
Ambidextrous safeties are okay for many shooters, but this single side safety fits my shooting grip with better ergonomics. It allows a lower bore axis and more solid shooting platform without that weak-side safety lever pressing into your metacarpo-phalangeal joint.
The precision of manufacture is impressive. This part is even better than the King's Safety of years past.
Bravo, Novak.
Why did I order two?? (21/03/2016)
That was a mistake. First, my "stainless" safety came with a powder coated dark gray paint on it which took an hour to sand off with #320 paper. The sear lug had enough meat on it for proper fitting so that was OK. The problem with this unit is the profile at the front edge just below the detent for the plunger. It is cut back too far allowing the tip of the plunger to extend out of the plunger tube too far. Comparing it to my safeties from Colt, Dan Wesson and EGW the difference is obvious. In time, the over-extended plunger will oval out the end of the plunger tube. Not a problem if you have spare plunger tubes and a staking tool. But why bother. I'll stick with the EGW.
Perfect(25/10/2012)
Switched out an ambi safety on my Springfield duty gun. I had also ordered an Ed Brown tactical safety which paled in comparison, both in finish and function. Paddle is a nice medium size. Design keeps the safety from rubbing the frame. Detent is is secure; I polished the plunger for smooth movement. Finish perfect for a parkerized pistol, would be dull on a blued one.
Novak NXT Safety(31/03/2018)
I installed this safety in a Springfield Mil-Spec that I am tinkering with. I bought it because its a Novak part and I've had good luck with Novak's stuff. I am impressed with the attention to detail. No rough edges or points, no tooling marks or seams and the finish is even and smooth. The thumb pad is very comfortable with a thumb over safety grip. And the best part is the detents at the "off" and "on" position are very positive. No extra movement at all. It "snicks" like an old Colt safety. Finding all these plusses together is often a hard thing to do. So far, the only drawback I can see is that I now have a bunch of 1911s that are in need of one of these.