Lighter & Heavier Springs To Tailor Precise Trigger Pull
Lighter hammer springs are required to gain those ultralight trigger pulls demanded by competitive shooters. Heavy springs adjust trigger let-off to individual requirements.
Altro...
Molle più Leggere e più Pesanti per Personalizzare il Peso di Sgancio del Grilletto
Le molle del martello più leggere sono necessarie per ottenere quei grilletti ultraleggeri richiesti dai tiratori competitivi. Le molle più pesanti regolano lo sgancio del grilletto secondo le esigenze individuali.
Altro...
Punteggi dei clienti per WOLFF 18 LB., LIGHT, 1911 AUTO, 1 EACH
Numero di punteggi: 7
Da brownells.com: 7
Punteggio medio: 4,4
Nice!(12/07/2016)
Completed my trigger job for a nice clean smooth crisp pull.
Wolff springs rock(29/08/2010)
The quality of Wolff springs is top notch. I have changed all of my factory springs in my 1911 to the Wollf brand. I have been using them for many years and they have never failed me. They work so good that's all I use now.
Think before you leap(10/02/2012)
First, there's nothing wrong with the product; it is as advertised. I would reccommend this to others...as long as they needed a 23lb spring. It is of excellent quality. That's why it got 5 stars. What wasn't of excellent quality was my thought process in purchasing. I had purchased a C&S sear, a Clark sear spring and a Greider trigger earlier so I thought I would purchase a hammer spring without knowing exactly what the weight of the current spring was. Let's just say that 23lbs is way too much for my comfort. It was a stock Springfield 1911A1 spring and I'm guessing (again) that it was about 18lbs or so. I have since swapped the spring back out. Nothing wrong with the new; just my mistake. Installed as advertised, no problems.
Great Product!(14/03/2011)
I replaced my standard (supposedly 23 lbs.) hammer spring with this Wolff spring rated at 20 lbs. The Wolff spring is actually longer than the factory spring, but the feel is so much smoother! From what I can tell, the hammer strike is just as strong, and the primer dents look identical to those of the factory spring. The trigger pull is a perfect 4 lbs. now, and the function (most important) is consistent, positive and flawless. This inexpensive spring makes it feel like an expensive trigger job, without any filing, fitting, or compromise in safety or reliability. And I can always trust the quality of Wolff springs!
Great for light trigger pull(18/06/2015)
Thiis 20lb hammer spring is great for lighter trigger pulls, perfect for competitive shooting or target practice.
If you go to a pistol competition your trigger pull will be tested & must be 5lbs so this will put your trigger pull lighter so great for those looking to lower trigger pull.
This spring is too long and does not work. The spring housing can be slid up the back of the frame almost into position and the hammer can be cocked and release, but when it is moved up just enough to put the housing pin in place the spring is stacked and will not allow the hammer to be cocked. Gun is a Springfield Armory TPR.
Excellent hammer spring!(20/07/2016)
I use this spring in my Kimber TLE II 9mm and Springfield Operator .45. Makes for a much lighter trigger pull, zero problems with light primer strikes to include any factory ammo (CCI, Winchester, Federal). Wish I would've went lighter sooner.
(I use this spring with an aftermarket mainspring housing in my Springfield. I believe the Springfield's ILS system mainspring housing requires a proprietory spring) This is what likely caused a problem for another reviewer.
N. prodotto: 969262180 WOLFF 18 LB., LIGHT, 1911 AUTO, 1 EACH Parti Fabbricante: 26218 Le molle del martello più leggere sono necessarie per ottenere quei grilletti ultraleggeri richiesti dai tiratori competitivi. Le molle più pesanti regolano lo sgancio del grilletto secondo le esigenze individuali.
19.9EUR019,90 €
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Adatto per:
1911
Modello:
Commander,Government
Peso della spedizione: 0,091kgAltezza di spedizione: 10mmLarghezza di spedizione: 64mmLunghezza di spedizione: 137mm
Dettagli dell'elemento
Made in Usa
Operatore economico responsabile secondo il regolamento UE
Brownells
Via Mezzavilla 4
25043 Breno
Italia
service@brownells.it
N. prodotto: 969262170 WOLFF 17 LB., LIGHT, 1911 AUTO, 1 EACH Parti Fabbricante: 26217 Le molle del martello più leggere sono necessarie per ottenere quei grilletti ultraleggeri richiesti dai tiratori competitivi. Le molle più pesanti regolano lo sgancio del grilletto secondo le esigenze individuali.
19.9EUR2819,90 €
*
Tempi di consegna circa 12-16 giorni. Più di 10 pz. nel magazzino USA
N. prodotto: 969262200 WOLFF 20 LB., LIGHT, 1911 AUTO, 1 EACH Parti Fabbricante: 26220 Le molle del martello più leggere sono necessarie per ottenere quei grilletti ultraleggeri richiesti dai tiratori competitivi. Le molle più pesanti regolano lo sgancio del grilletto secondo le esigenze individuali.
19.9EUR3019,90 €
*
Tempi di consegna circa 12-16 giorni. Più di 10 pz. nel magazzino USA
N. prodotto: 969262230 WOLFF 23 LB., FACTORY, 1911 AUTO, 1 EACH Parti Fabbricante: 26223 Le molle del martello più leggere sono necessarie per ottenere quei grilletti ultraleggeri richiesti dai tiratori competitivi. Le molle più pesanti regolano lo sgancio del grilletto secondo le esigenze individuali.
19.9EUR1119,90 €
*
Tempi di consegna circa 12-16 giorni. Più di 10 pz. nel magazzino USA
N. prodotto: 969263170 WOLFF 17 LB., LIGHT, 1911 AUTO, 3-PAK Parti Fabbricante: 26317 Le molle del martello più leggere sono necessarie per ottenere quei grilletti ultraleggeri richiesti dai tiratori competitivi. Le molle più pesanti regolano lo sgancio del grilletto secondo le esigenze individuali.
32.9EUR4632,90 €
*
Tempi di consegna circa 12-16 giorni. Più di 10 pz. nel magazzino USA
N. prodotto: 969263180 WOLFF 18 LB., LIGHT, 1911 AUTO, 3-PAK Parti Fabbricante: 26318 Le molle del martello più leggere sono necessarie per ottenere quei grilletti ultraleggeri richiesti dai tiratori competitivi. Le molle più pesanti regolano lo sgancio del grilletto secondo le esigenze individuali.
32.9EUR3832,90 €
*
Tempi di consegna circa 12-16 giorni. Più di 10 pz. nel magazzino USA
N. prodotto: 969263200 WOLFF 20 LB., LIGHT, 1911 AUTO, 3-PAK Parti Fabbricante: 26320 Le molle del martello più leggere sono necessarie per ottenere quei grilletti ultraleggeri richiesti dai tiratori competitivi. Le molle più pesanti regolano lo sgancio del grilletto secondo le esigenze individuali.
29.9EUR1329,90 €
*
Tempi di consegna circa 12-16 giorni. Più di 10 pz. nel magazzino USA
N. prodotto: 969263230 WOLFF 23 LB., FACTORY, 1911 AUTO, 3-PAK Parti Fabbricante: 26323 Le molle del martello più leggere sono necessarie per ottenere quei grilletti ultraleggeri richiesti dai tiratori competitivi. Le molle più pesanti regolano lo sgancio del grilletto secondo le esigenze individuali.
28.9EUR428,90 €
*
Tempi di consegna circa 12-16 giorni. 4 pz. nel magazzino USA
N. prodotto: 969263250 WOLFF 25 LB., HEAVY, 1911 AUTO, 3-PAK Parti Fabbricante: 26325 Le molle del martello più leggere sono necessarie per ottenere quei grilletti ultraleggeri richiesti dai tiratori competitivi. Le molle più pesanti regolano lo sgancio del grilletto secondo le esigenze individuali.
28.9EUR1628,90 €
*
Tempi di consegna circa 12-16 giorni. Più di 10 pz. nel magazzino USA
Lighter & Heavier Springs To Tailor Precise Trigger Pull
Lighter hammer springs are required to gain those ultralight trigger pulls demanded by competitive shooters. Heavy springs adjust trigger let-off to individual requirements.
Altro...
Molle più Leggere e più Pesanti per Personalizzare il Peso di Sgancio del Grilletto
Le molle del martello più leggere sono necessarie per ottenere quei grilletti ultraleggeri richiesti dai tiratori competitivi. Le molle più pesanti regolano lo sgancio del grilletto secondo le esigenze individuali.
Altro...
Punteggi dei clienti per WOLFF 18 LB., LIGHT, 1911 AUTO, 1 EACH
Numero di punteggi: 7
Da brownells.com: 7
Punteggio medio: 4,4
Nice!(12/07/2016)
Completed my trigger job for a nice clean smooth crisp pull.
Wolff springs rock(29/08/2010)
The quality of Wolff springs is top notch. I have changed all of my factory springs in my 1911 to the Wollf brand. I have been using them for many years and they have never failed me. They work so good that's all I use now.
Think before you leap(10/02/2012)
First, there's nothing wrong with the product; it is as advertised. I would reccommend this to others...as long as they needed a 23lb spring. It is of excellent quality. That's why it got 5 stars. What wasn't of excellent quality was my thought process in purchasing. I had purchased a C&S sear, a Clark sear spring and a Greider trigger earlier so I thought I would purchase a hammer spring without knowing exactly what the weight of the current spring was. Let's just say that 23lbs is way too much for my comfort. It was a stock Springfield 1911A1 spring and I'm guessing (again) that it was about 18lbs or so. I have since swapped the spring back out. Nothing wrong with the new; just my mistake. Installed as advertised, no problems.
Great Product!(14/03/2011)
I replaced my standard (supposedly 23 lbs.) hammer spring with this Wolff spring rated at 20 lbs. The Wolff spring is actually longer than the factory spring, but the feel is so much smoother! From what I can tell, the hammer strike is just as strong, and the primer dents look identical to those of the factory spring. The trigger pull is a perfect 4 lbs. now, and the function (most important) is consistent, positive and flawless. This inexpensive spring makes it feel like an expensive trigger job, without any filing, fitting, or compromise in safety or reliability. And I can always trust the quality of Wolff springs!
Great for light trigger pull(18/06/2015)
Thiis 20lb hammer spring is great for lighter trigger pulls, perfect for competitive shooting or target practice.
If you go to a pistol competition your trigger pull will be tested & must be 5lbs so this will put your trigger pull lighter so great for those looking to lower trigger pull.
This spring is too long and does not work. The spring housing can be slid up the back of the frame almost into position and the hammer can be cocked and release, but when it is moved up just enough to put the housing pin in place the spring is stacked and will not allow the hammer to be cocked. Gun is a Springfield Armory TPR.
Excellent hammer spring!(20/07/2016)
I use this spring in my Kimber TLE II 9mm and Springfield Operator .45. Makes for a much lighter trigger pull, zero problems with light primer strikes to include any factory ammo (CCI, Winchester, Federal). Wish I would've went lighter sooner.
(I use this spring with an aftermarket mainspring housing in my Springfield. I believe the Springfield's ILS system mainspring housing requires a proprietory spring) This is what likely caused a problem for another reviewer.