MILLENIUM CUSTOM II
1911 ADVANCED COMPETITION EXTRACTOR

466001009

Dual Coil Springs End Extractor Failure

No-fail extractor operates with long-lasting coil springs for increased service life; provides enhanced, reliable performance for self-defense and competitor shooters. Machined from super strong, alloy steel; specially hardened and heat treated to last indefinitly. Installs easily in Series 70 1911 Autos without slide modifications.

SPECS: Steel, in-the-white, heat treated. Includes two sets of springs, complete instructions. NOTE on 9mm: If your slide has a true, 9mm breech face (like the SVI interchangable, some Caspians and Nowlins, order extractor #466-001-038. If your 9mm is built on a .38 Super Slide (most are) order extractor #466-001-009.

Altro...

Doppie Molle a Spirale Eliminano il Fallimento dell'Estrattore

Estrattore infallibile funzionante con molle a spirale di lunga durata per un'estesa vita operativa; fornisce prestazioni affidabili e migliorate per tiratori difensivi e competitivi. Fresato da un acciaio legato super resistente; particolarmente indurito e trattato termicamente per durare indefinitamente. Si installa facilmente nelle 1911 Autos Serie 70 senza modifiche alla culatta.

SPECIFICHE: Acciaio, grezzo, trattato termicamente. Include due set di molle, istruzioni complete. NOTA sulla 9mm: Se la tua culatta ha una vera faccia da 9mm (come le intercambiabili SVI, alcune Caspian e Nowlin, ordina l'estrattore #466-001-038. Se la tua 9mm è costruita su una culatta di .38 Super (la maggior parte lo sono) ordina l'estrattore #466-001-009.

Altro...

Punteggi dei clienti per MILLENIUM CUSTOM II FITS 9X19, 9X21, 9X23X 38 SUPER COMP.

Numero di punteggi: 7
Da brownells.com: 7
Punteggio medio: 4,4

Final Answer in Extractors! (24/08/2009)

This will end your extractor problems in your 1911. I had a Kimber and I could not get the extractor tuned correctly. I spent the extra and got the Millenium over the traditional designs. It installed easily with only minor fitting. Make sure it floats very freely on the firing pin stop. It cured all extractions problems.

Best Extractor Period (15/06/2012)

There isn't a thing to complain about this extractor other than losing the springs when you clean your gun. A little fitting at the firing pin stop and a little shaping (if at all) is all you need to get this extractor running great. The extra cost is actually cheaper in the long run when just having to change the springs and cap compared to changing the entire extractor, fitting, and tuning. I have put well over 5000 rounds on this extractor with no problems at all, and change out the springs and cap just for a yearly tune up. Springs come out still with good spring pressure and the cap isn't beat up at all

Very Disappointed (27/05/2013)

I read good things about this extractor and gave it a try. Unfortunately, I cannot get it to function properly. The instructions talk about fitting a firing pin stop to allow the extractor's slot to pivot around the firing pin stop. After much filing, I've been unable to fit the firing pin stop enough to allow the extractor to exert enough tension on a casing.

Perhaps this company needs to provide its own firing pin stop in the kit.

It'll sit in my spare parts box until I give it away along with a scrapped $20 firing pin stop.

Absolutely the best (14/11/2013)

This is the most reliable extractor that ever was. I wish I had invented it since I am now about to buy my 5th one in about 15 years! No they didn't wear out I'm just putting one on my newest competetion toy. I have NEVER had a failed extraction in 15,000 to 20,000 rounds. I have tried ALL of the others. Watch out for all of the catch phrases like " tough, bullet proof, hard core etc. they talk the talk". Take the time to fit it to the firing pin stop since there are many different sizes. Thickness etc.

Worth Every Penny. (15/03/2014)

My STI Ranger II had failure to extract causing a double feed 5/10 times with reloaded ammunition and about once or twice per mag with factory ammunition. I ordered one of these guys and dropped it in. It fix all of my FTE. I have since ran about 500 rounds through her and i have ZERO issues. For 9mm it's a bit tougher to install an extractor. This product DOES REQUIRE FITTING. you might have to make modifications to your firing pin stop. Mine also sticks out a bit at the back that i will have to file or stone to make it fit flush. I can live with it sticking out a bit so long as my gun guns 100%. This product also requires a breaking in period. It comes with 2 springs and of which i only installed one until the spring softened a little. It is a lot beefier then the stock extractor.

gun fixed (28/06/2015)

Wife favorite gun love to shoot it, 1911 38 super, has has extraction problems right out of the box. Many tunings, no progress Then I bought a high dollar extractor and had the areas "best gunsmith" install and tune it. 70 rounds OK and then problems again with jams and stovepipes again.

Bought one of these extractors installed it myself and she just put "problem free" round number 500 through it today. Problem solved and we are both very pleased with the product.

Worked on a 22 TCM (08/09/2015)

So the Rock Island 22 TCM can be a problematic cartridge. I was starting to have a myriad of FTE's. I read about this and as a last resort thought I'd try it. The 22 TCM is not based on the 9mm but on the 5.56 case head size. So it's a bit smaller. The extractor didn't hold the TCM case as tightly as a 9mm. It didn't matter. It still worked and worked well. For the first time I ran a box of ammo though the pistol with no malfunctions.

It's a bit fiddley to install, more so that a regular extractor but after playing with it a bit I managed to it in...I'm very happy with it. $89.00 is stiff but it does work.

Leggi più recensioni su brownells.com

0 0 1 EUR

N. prodotto: 466001009
MILLENIUM CUSTOM II FITS 9X19, 9X21, 9X23X 38 SUPER COMP.
Parti Fabbricante: ACE01 Estrattore infallibile funzionante con molle a spirale di lunga durata per un'estesa vita operativa; fornisce prestazioni affidabili e migliorate per tiratori difensivi e competitivi. Fresato da un acciaio legato super resistente; particolarmente indurito e trattato termicamente per durare indefinitamente. Si installa facilmente nelle 1911 Autos Serie 70 senza modifiche alla culatta.

Avvisa quando diventa disponibile

Non disponibile.

Caratteristiche: Adatto per: 1911 Calibro: 38 Super (.355-.356) Finitura: Nero Modello: Government, Commander, Officers

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Top takeaways

Estrattore infallibile con molle a spirale di lunga durata, ideale per tiratori difensivi e competitivi.
Realizzato in acciaio legato super resistente, trattato termicamente per una durata indefinita.
Compatibile con 1911 Autos Serie 70, facile da installare senza modifiche alla culatta.

Caratteristiche

Adatto per: 1911 Calibro: 38 Super (.355-.356) Finitura: Nero Modello: Commander,Government,Officers Peso della spedizione: 0,018kg Altezza di spedizione: 8mm Larghezza di spedizione: 102mm Lunghezza di spedizione: 128mm