Il Carrello è vuoto.

Carrello

Aiuto e contatti

Reso facile

Newsletter

Offerte

Oltre 300.000 clienti - vi ringraziamo!

4,93/5 "Molto buono" (1400+ recensioni)

Oltre 40.000 prodotti per caccia e sport di tiro

BROWNELLS
STEEL PILOTS

050806018303 080686503

Centers Cutters For Accurate Work

Hardened steel pilot keeps Facing and Chamfering cutters properly centered in the bore. Resists wear for years of service.

Select one of the following for other rifle/handgun muzzles, cylinder facing & chamfering tools.

	Steel One Caliber Set		45° Cutter & Steel Pilot
	Brass One Caliber Set		45° Cutter & Brass Pilot
	90° Cutter & Steel Pilot		Chamfering & Facing Combo Sets
	90° Cutter & Brass Pilot		Brass Pilot Only

SPECS: Hardened steel. 1¼" (3.2cm) long. .45 ACP Pilots - .45 ACP-1 fits S&W model 25 & 625. .45 ACP-2 fits Colt 1917.

Altro...

Centra Taglierini per Lavori Precisi

Il pilota in acciaio indurito mantiene i taglierini per Finitura e Smussatura perfettamente centrati nel foro. Resiste all'usura per anni di servizio.

Scegli uno dei seguenti per altri calibri di fucili/pistole, finitura del cilindro e strumenti per smussatura.

	Set Acciaio Un Calibro		Taglierina 45° & Steel Pilot
	Set Ottone Un Calibro		Taglierina 45° & Brass Pilot
	Taglierina 90° & Steel Pilot		Set Combinati per Finitura & Smussatura
	Taglierina 90° & Brass Pilot		Solo Brass Pilot

SPECS: Acciaio indurito. Lunghezza 1¼" (3.2cm). .45 ACP Pilots - .45 ACP-1 adatto per S&W modello 25 & 625. .45 ACP-2 adatto per Colt 1917.

Altro...

Punteggi dei clienti per BROWNELLS STEEL PILOT FOR .50 BMG/BP MUZZLE

Numero di punteggi: 10
Da brownells.com: 10
Punteggio medio: 4,1

Too big for S&W 625 (15/09/2010)

Larger then the 45-1 and that needs to be fit to work with the 625 cylinder

Almost a perfict fit (15/09/2010)

This is the one for the S&W625, it must be turned down for a nice tight wobble free fit but will not wear out after that. Well machined and concentric.

Too small for S&W 610 (15/09/2010)

Very well made, concentric and smooth machining but too small to fit the S&W 610 10mm cylinder. Get the 41mag and turn it down for a perfect zero wobble fit.

Yes this works with Mosins (03/08/2013)

I ordered this pilot for use with an 11 degree muzzle crown tool for my Mosin Nagant rifles. The good, it fit perfect with no wobble. The bad this worked on only one of my rifles, the project gun I ordered it for had a bore diameter of less than .311. No problem I will just order the .30 caliber pilot. I could have ordered the .30 caliber size to begin with but I didn't want a loose fit or have to use a cloth patch to "make" it work.

It is a quality made tool and I can see it lasting a long time with proper care. Yes it works with some Mosins. if you have multiple rifles be prepared to order both of the pilots so you get a perfect fit.

Good quality product (13/11/2009)

The pilot has the look of good quality. The pilot fits the cutter and the muzzle real well.

This fits Mosin Nagant Rifles (10/08/2013)

Good quality pilot, no wobble when used in the proper size bore.

I had a tighter bore Mosin and this worked perfectly. I also ordered the .311 steel pilot to fit my Type 53 Mosin.

If you only plan on buying one pilot to work in all Mosins get this one. If your bore is a little bigger, use a cloth patch to make a tighter fit. This pilot will be loose in the more traditional .311 bore size.

Good quality product. (06/11/2009)

The pilot has the look of good quality. It fits the cutter real well. It also fits real well in the muzzel.

Good quality product. (06/11/2009)

The pilot has the look of qood quality. It fits the cutter real well. It also has a real good fit in the muzzel.

Good quality product. (08/11/2009)

The pilot has a look of good quality. It fits the cutter real well. It also has a good fit in the muzzel.

Good quality product (13/11/2009)

The pilot has the look of good quality. It also fits both the muzzle and cutter real well.

Leggi più recensioni su brownells.com

33.9 42.9 43 EUR

N. prodotto: 080686503
BROWNELLS STEEL PILOT FOR .50 BMG/BP MUZZLE 050806018303 Il pilota in acciaio indurito mantiene i taglierini per Finitura e Smussatura perfettamente centrati nel foro. Resiste all'usura per anni di servizio.

35.9 EUR 1 35,90 € *

Tempi di consegna circa 12-16 giorni.
1 pz. nel magazzino USA

Caratteristiche: Calibro: 50 Calibro (.500-.501) Materiale: Acciaio

BROWNELLS STEEL PILOTS

Punteggi dei clienti per BROWNELLS STEEL PILOT FOR .50 BMG/BP MUZZLE

Caratteristiche

Dettagli dell'elemento

Operatore economico responsabile secondo il regolamento UE

Punteggi dei clienti per BROWNELLS STEEL PILOT FOR .50 BMG/BP MUZZLE

Collegare

Metodi di pagamento sicuri

Associazioni di categoria

Benvenuti!

BROWNELLS
STEEL PILOTS