This handy, super-simple device helps ensure your scope’s crosshairs are properly indexed with the center of the bore so you’ll get the most accurate performance from your rifle and scope. The two-piece system easily attaches to the scope and uses a standard bubble level to indicate proper alignment. Works great for optics mounted on rifles, handguns, and shotguns, so whatever you’re shooting today, this tool will have you range-ready in seconds! It’s simple, clean design makes it easy to align your scope’s reticle with your gun. No more guessing, no more frustration, and no more hassle. The Tactical Reticle Leveler does the job better, faster, and cheaper than other, more complicated devices and it fits snugly onto the picatinny rails of your AR-15’s and scope bases.
Altro...
Questo pratico e semplicissimo dispositivo aiuta a garantire che i reticoli del tuo cannocchiale siano correttamente allineati con il centro della canna, così otterrai le prestazioni più accurate dal tuo fucile e cannocchiale. Il sistema a due pezzi si attacca facilmente al cannocchiale e utilizza un livello a bolla standard per indicare il corretto allineamento. Funziona alla grande per ottiche montate su fucili, pistole e fucili a canna liscia, quindi qualunque cosa tu stia sparando oggi, questo strumento ti renderà pronto al tiro in pochi secondi! Il suo design semplice e pulito rende facile allineare il reticolo del tuo cannocchiale con la tua arma. Niente più supposizioni, niente più frustrazioni e niente più problemi. Il Tactical Reticle Leveler fa il lavoro meglio, più velocemente e più economicamente rispetto ad altri dispositivi più complicati e si adatta perfettamente ai binari picatinny dei tuoi AR-15 e basi per cannocchiale.
Altro...
Punteggi dei clienti per STRAIGHT SHOT TACTICAL RETICLE LEVELER
Numero di punteggi: 8
Da brownells.com: 8
Punteggio medio: 3,9
At first glance the concept is good but(12/03/2017)
I purchased this product to check to see if my 40mm scope tube was properly aligned to my scope rings. At first glance the concept was good, however, in real life the product failed miserably. I installed the product exactly as noted in their instruction sheet. When I tried to line up the cross hairs to the reference marks on both sides of my scope... it was impossible. The picture that they show in step 4 is pure fiction. At an eye relief of 3 inches I can't see any reference bars like they show on the instruction sheet. I finally had to remove the "Segway Reticle Leveler" from my scope and place it on a wall 30ft from my rifle. With the product leveled, I was able to confirm using the product as a target, that my reticle was properly aligned and level to my rifle. I had initially setup my scope with a laser and a printout of a target to zero in my scope at 100 yards. In addition, the product is poorly constructed. If you lay the product on a flat surface one of the reference flags is skewed up by an 1/8 of an inch. Overall, I am not impressed with this product and give it one star only because I could put in on a wall and use it as a leveled target and spot check my reticle... otherwise, I would have given it a ZERO star rating.
Works well(20/09/2013)
This nifty device works pretty well. I live that it levels to the receiver, rather than relying on a bubble and therefore the alignment of whatever mount the gun is in. (Note that it has a bubble, but on my AR15 the base bar rests square against the picatinny rail, rendering the bubble moot.)
Minus one star because the rubber band broke the second time I used it.
Very Simple(26/12/2013)
Great simple design that's very easy to use.
Junk(28/02/2015)
Awesome(16/05/2015)
Not sure why anyone would say this is hard to use. I bought both the tactical and standard and used them for the first time today. Easy to use and really nifty!!! if you have problems using it maybe you could consult a professional.
Absolutely perfect!(07/03/2017)
I use this on a Rock River AR-15 with picatinny rail, a Savage bolt rifle with Leupold base, a Remington model 760 with Leupold base, and a pair of Ruger 10-22s with Ruger Weaver bases. Works perfectly, for years!
Works Great!..(18/02/2018)
Simple and fast but I use it with a small torpedo level. I mount the Segway on my hunting bolt action rifle off of the front ring mount base to get my rifle level and use a separate small torpedo level on top of my scope turret and level my scope level to my rifle level to get perfect vertical reticle level every time.
Those bad reviews are irrelevant.(06/04/2018)
This is the tool that snipers use to set up their scopes. They're simple to use. You don't need to have your eye perfectly in the eye relief zone to make sure the reticle is parallel to the lines on the card. This tool is THE best way to properly mount a scope.
N. prodotto: 100013054 STRAIGHT SHOT TACTICAL RETICLE LEVELER Parti Fabbricante: 002861379000011 Questo pratico e semplicissimo dispositivo aiuta a garantire che i reticoli del tuo cannocchiale siano correttamente allineati con il centro della canna, così otterrai le prestazioni più accurate dal tuo fucile e cannocchiale. Il sistema a due pezzi si attacca facilmente al cannocchiale e utilizza un livello a bolla standard per indicare il corretto allineamento. Funziona alla grande per ottiche montate su fucili, pistole e fucili a canna liscia, quindi qualunque cosa tu stia sparando oggi, questo strumento ti renderà pronto al tiro in pochi secondi! Il suo design semplice e pulito rende facile allineare il reticolo del tuo cannocchiale con la tua arma. Niente più supposizioni, niente più frustrazioni e niente più problemi. Il Tactical Reticle Leveler fa il lavoro meglio, più velocemente e più economicamente rispetto ad altri dispositivi più complicati e si adatta perfettamente ai binari picatinny dei tuoi AR-15 e basi per cannocchiale.
Il dispositivo garantisce l'allineamento corretto dei reticoli del cannocchiale con il centro della canna per prestazioni accurate.
Il sistema a due pezzi si attacca facilmente al cannocchiale e utilizza un livello a bolla standard per indicare l'allineamento corretto.
Adatto per ottiche montate su fucili, pistole e fucili a canna liscia, e si adatta perfettamente ai binari picatinny degli AR-15 e basi per cannocchiale.
Caratteristiche
Peso della spedizione: 0,091kgAltezza di spedizione: 16mmLarghezza di spedizione: 112mmLunghezza di spedizione: 178mm
UPC
: 861379000011
Dettagli dell'elemento
Made in Usa
N. prodotto: 100011731 STRAIGHT SHOT LLC SEGWAY RETICLE LEVELER Parti Fabbricante: MARK III RETICL861379000004 Questo pratico e semplicissimo dispositivo aiuta a garantire che i reticoli del tuo cannocchiale siano correttamente allineati con il centro della canna, così otterrai le prestazioni più accurate dal tuo fucile e cannocchiale. Il sistema a due pezzi si attacca facilmente al cannocchiale e utilizza un livello a bolla standard per indicare il corretto allineamento. Funziona alla grande per ottiche montate su fucili, pistole e fucili a canna liscia, quindi qualunque cosa tu stia sparando oggi, questo strumento ti renderà pronto al tiro in pochi secondi! Il suo design semplice e pulito rende facile allineare il reticolo del tuo cannocchiale con la tua arma. Niente più supposizioni, niente più frustrazioni e niente più problemi. Il Tactical Reticle Leveler fa il lavoro meglio, più velocemente e più economicamente rispetto ad altri dispositivi più complicati e si adatta perfettamente ai binari picatinny dei tuoi AR-15 e basi per cannocchiale.
This handy, super-simple device helps ensure your scope’s crosshairs are properly indexed with the center of the bore so you’ll get the most accurate performance from your rifle and scope. The two-piece system easily attaches to the scope and uses a standard bubble level to indicate proper alignment. Works great for optics mounted on rifles, handguns, and shotguns, so whatever you’re shooting today, this tool will have you range-ready in seconds! It’s simple, clean design makes it easy to align your scope’s reticle with your gun. No more guessing, no more frustration, and no more hassle. The Tactical Reticle Leveler does the job better, faster, and cheaper than other, more complicated devices and it fits snugly onto the picatinny rails of your AR-15’s and scope bases.
Altro...
Questo pratico e semplicissimo dispositivo aiuta a garantire che i reticoli del tuo cannocchiale siano correttamente allineati con il centro della canna, così otterrai le prestazioni più accurate dal tuo fucile e cannocchiale. Il sistema a due pezzi si attacca facilmente al cannocchiale e utilizza un livello a bolla standard per indicare il corretto allineamento. Funziona alla grande per ottiche montate su fucili, pistole e fucili a canna liscia, quindi qualunque cosa tu stia sparando oggi, questo strumento ti renderà pronto al tiro in pochi secondi! Il suo design semplice e pulito rende facile allineare il reticolo del tuo cannocchiale con la tua arma. Niente più supposizioni, niente più frustrazioni e niente più problemi. Il Tactical Reticle Leveler fa il lavoro meglio, più velocemente e più economicamente rispetto ad altri dispositivi più complicati e si adatta perfettamente ai binari picatinny dei tuoi AR-15 e basi per cannocchiale.
Altro...
Punteggi dei clienti per STRAIGHT SHOT TACTICAL RETICLE LEVELER
Numero di punteggi: 8
Da brownells.com: 8
Punteggio medio: 3,9
At first glance the concept is good but(12/03/2017)
I purchased this product to check to see if my 40mm scope tube was properly aligned to my scope rings. At first glance the concept was good, however, in real life the product failed miserably. I installed the product exactly as noted in their instruction sheet. When I tried to line up the cross hairs to the reference marks on both sides of my scope... it was impossible. The picture that they show in step 4 is pure fiction. At an eye relief of 3 inches I can't see any reference bars like they show on the instruction sheet. I finally had to remove the "Segway Reticle Leveler" from my scope and place it on a wall 30ft from my rifle. With the product leveled, I was able to confirm using the product as a target, that my reticle was properly aligned and level to my rifle. I had initially setup my scope with a laser and a printout of a target to zero in my scope at 100 yards. In addition, the product is poorly constructed. If you lay the product on a flat surface one of the reference flags is skewed up by an 1/8 of an inch. Overall, I am not impressed with this product and give it one star only because I could put in on a wall and use it as a leveled target and spot check my reticle... otherwise, I would have given it a ZERO star rating.
Works well(20/09/2013)
This nifty device works pretty well. I live that it levels to the receiver, rather than relying on a bubble and therefore the alignment of whatever mount the gun is in. (Note that it has a bubble, but on my AR15 the base bar rests square against the picatinny rail, rendering the bubble moot.)
Minus one star because the rubber band broke the second time I used it.
Very Simple(26/12/2013)
Great simple design that's very easy to use.
Junk(28/02/2015)
Awesome(16/05/2015)
Not sure why anyone would say this is hard to use. I bought both the tactical and standard and used them for the first time today. Easy to use and really nifty!!! if you have problems using it maybe you could consult a professional.
Absolutely perfect!(07/03/2017)
I use this on a Rock River AR-15 with picatinny rail, a Savage bolt rifle with Leupold base, a Remington model 760 with Leupold base, and a pair of Ruger 10-22s with Ruger Weaver bases. Works perfectly, for years!
Works Great!..(18/02/2018)
Simple and fast but I use it with a small torpedo level. I mount the Segway on my hunting bolt action rifle off of the front ring mount base to get my rifle level and use a separate small torpedo level on top of my scope turret and level my scope level to my rifle level to get perfect vertical reticle level every time.
Those bad reviews are irrelevant.(06/04/2018)
This is the tool that snipers use to set up their scopes. They're simple to use. You don't need to have your eye perfectly in the eye relief zone to make sure the reticle is parallel to the lines on the card. This tool is THE best way to properly mount a scope.