Il Carrello è vuoto.

Carrello

Aiuto e contatti

Reso facile

Newsletter

Offerte

Oltre 300.000 clienti - vi ringraziamo!

4,93/5 "Molto buono" (1400+ recensioni)

Oltre 40.000 prodotti per caccia e sport di tiro

GRACE USA
ROLL PIN PUNCHES

731940876546 354000011

Non-Marring, Precision-Machined To Fit Common Pin Sizes

For drifting sights, driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium, brass hex. Roll Pin Punch Set includes 8 roll pin punches with ends that fit around roll pins without drifting off.

SPECS: Brass, 5⁄16" (7.9mm) hex stock. Punch Set/Roll Pin Punch Set - 8 punches: 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", ¼”, 5⁄16" dia.

Altro...

Non Danneggia, Precisione Lavorata per Adattarsi alle Dimensioni Comuni dei Perni

Per spostare mirini, guidare perni o adattare parti quando segnare o graffiare la superficie può significare la differenza tra un lavoro ben fatto e un disastro. Lavorati da ottone esagonale di qualità. Il Set di Punzoni per Spine Elastiche include 8 punzoni per spine elastiche con estremità che si adattano attorno alle spine senza deviare.

SPECIFICHE: Ottone, sezione esagonale 5⁄16" (7.9mm). Set di Punzoni/Set di Punzoni per Spine Elastiche - 8 punzoni: 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", ¼”, 5⁄16" dia.

Altro...

Punteggi dei clienti per GRACE USA BRASS ROLL PIN PUNCH SET, 8 PC

Numero di punteggi: 6
Da brownells.com: 6
Punteggio medio: 2,2

Brass is a horrible pin punch material (14/03/2010)

This brass roll pin punch set is a nicely manufactured set that fails miserably at its intended function. The purpose of the brass is to eliminate marring of your upper or lower receiver as you are working. Brass fails for two reasons. First, you ABSOLUTELY can mar your receiver with brass. You can both gouge the aluminum and strip the anodizing off if you hit the punch against your receiver. Granted, it does less damage than a hardened steel punch, but don't let that lull you into a false sense of security. Second, these pin punches rapidly self-destruct as they are used. The steel roll pins quickly destroy the tip of your punches as you hammer them in. This is just a poor product, plain and simple. The best advise I can give you is to get a good set of steel roll pin punches from Brownells (lifetime guaranteed replacement) and be careful while using. Good luck!

Not worth the $'s (07/12/2011)

Bent the small punch with first time using....

Not Recommended (29/01/2012)

I've had this set for a while now, and not used until today. In working on one of my rifles I bent 2 of the brass punches. These punches cannot withstand any real working on rifles.

I disagree with other reviewers (03/09/2013)

Brass punches are indeed "soft", that's the reason you buy brass punches over steel punches in the first place.

Other reviewers mention using these to install roll pins in AR receivers. Again, this is a failure on the reviewer's part.

Roll pins must be "started" with starter punches (SKU 080-685-000 for example) and then drive them in/flush with the proper roll pin punche (SKU 354-000-025). Those are the tools you need for an AR.

These brass punches on the other hand are for lighter use, on visible parts you don't want to mar. Hence they aren't recommended as "general purpose" punches.

Damaged too easily (31/03/2014)

I used these punches for my M&P to try and install one of the Apex Tactical kits. I had to go find other punches just to get the job done. The shafts are not long enough to make it through the body of the weapon. The small punch bent on first use. The roll pin ends have been flattened and no longer tipped. This set also left yellow/gold color brass on every pin I drove it. My black weapons now has golden highlights...

Long story short get a set of steel start punches so you don't bend your longer steel roll pin drift punches and be careful!

Excellent punches for their INTENDED use (20/02/2015)

Stop buying these punches to drive roll pins and stout steel pins that require STEEL punches of matching size and type. Brass punches are meant for adjusting driftable sights and delicate parts that you do not want to gouge or peen over with steel punches. Brass punches are not meant for installing roll pins in receivers nor staking fasteners, etc. If you use the wrong tool for the job and you're disappointed, the fault is yours, not the tool's. You wouldn't carve a turkey with a butter knife. I own 3 sets of Grace punches, 3 sets of their screwdrivers, hammers, and a set of picks. They are fantastic in build quality, craftsmanship, and have no doubts I could pass them down through generations. Their screwdrivers are outstanding and fit the screw heads perfectly if you use the proper size. They aren't cheap, but you get an investment with these. Take care of them and use them for the right jobs.

Leggi più recensioni su brownells.com

69.9 69.9 1 EUR

N. prodotto: 354000011
GRACE USA BRASS ROLL PIN PUNCH SET, 8 PC
Parti Fabbricante: BRP-8 731940876546 Per spostare mirini, guidare perni o adattare parti quando segnare o graffiare la superficie può significare la differenza tra un lavoro ben fatto e un disastro. Lavorati da ottone esagonale di qualità. Il Set di Punzoni per Spine Elastiche include 8 punzoni per spine elastiche con estremità che si adattano attorno alle spine senza deviare.

69.9 EUR 14 69,90 € *

Tempi di consegna circa 12-16 giorni.
Più di 10 pz. nel magazzino USA

Caratteristiche: Materiale: Brass Tipo: Set, Roll Pin Quantità: 8

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Top takeaways

Il set include 8 punzoni per spine elastiche con estremità che si adattano attorno alle spine senza deviare.
Lavorati da ottone esagonale di qualità, con sezione di 5⁄16" (7.9mm).
Dimensioni dei punzoni: 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", ¼”, 5⁄16".

Caratteristiche

Materiale: Brass Tipo: Roll Pin,Set Quantità: 8 Peso della spedizione: 0,318kg Altezza di spedizione: 18mm Larghezza di spedizione: 97mm Lunghezza di spedizione: 163mm UPC : 731940876546

Dettagli dell'elemento

Made in Usa

Operatore economico responsabile secondo il regolamento UE

Brownells
Via Mezzavilla 4
25043 Breno
Italia
service@brownells.it

Scopri il set di punzoni per spine elastiche in ottone di GRACE USA! 🛠️ Include 8 punzoni per un lavoro preciso e senza errori.

Non-Marring, Precision-Machined To Fit Common Pin Sizes

SPECS: Brass, 5⁄16" (7.9mm) hex stock. Punch Set/Roll Pin Punch Set - 8 punches: 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", ¼”, 5⁄16" dia.

Altro...

Non Danneggia, Precisione Lavorata per Adattarsi alle Dimensioni Comuni dei Perni

SPECIFICHE: Ottone, sezione esagonale 5⁄16" (7.9mm). Set di Punzoni/Set di Punzoni per Spine Elastiche - 8 punzoni: 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", ¼”, 5⁄16" dia.

Altro...

Punteggi dei clienti per GRACE USA BRASS ROLL PIN PUNCH SET, 8 PC

Numero di punteggi: 6
Da brownells.com: 6
Punteggio medio: 2,2

Brass is a horrible pin punch material (14/03/2010)

Not worth the $'s (07/12/2011)

Bent the small punch with first time using....

Not Recommended (29/01/2012)

I've had this set for a while now, and not used until today. In working on one of my rifles I bent 2 of the brass punches. These punches cannot withstand any real working on rifles.

I disagree with other reviewers (03/09/2013)