Il Carrello è vuoto.

Carrello

Aiuto e contatti

Reso facile

Newsletter

Offerte

Oltre 300.000 clienti - vi ringraziamo!

4,93/5 "Molto buono" (1400+ recensioni)

Oltre 40.000 prodotti per caccia e sport di tiro

CYLINDER & SLIDE
COLT .380 ALUMINUM TRIGGER

000000003117 206000020

Replaces The Plastic Factory Part For Better Wear, Improved "Feel"

Long-wearing, CNC-machined, aluminum trigger easily replaces the Colt factory nylon/plastic trigger for increased durability and a more solid feeling trigger pull. Use as a standalone enhancement or part of a complete trigger job. Installation may require slight modification; completely eliminates premature trigger wear breakage at the trigger pivot pin hole.

SPECS: Aluminum, matte silver. Fits Colt .380 Government and Mustang models.

Altro...

Sostituisce il pezzo di fabbrica in plastica per una maggiore resistenza e un "tocco" migliorato

Resistente grilletto in alluminio lavorato CNC, facile da sostituire rispetto al grilletto in nylon/plastica di fabbrica Colt per una maggiore durabilità e una sensazione di azionamento più solida. Utilizzabile come miglioramento singolo o parte di un lavoro completo sul grilletto. L'installazione può richiedere leggere modifiche; elimina completamente l'usura prematura del grilletto e la rottura al foro del perno di pivot.

SPECS: Alluminio, argento opaco. Compatibile con i modelli Colt .380 Government e Mustang.

Altro...

Punteggi dei clienti per CYLINDER & SLIDE ALUMINUM COLT .380 TRIGGER

Numero di punteggi: 8
Da brownells.com: 8
Punteggio medio: 4,1

I would and did buy this product again (21/04/2010)

Fits perfect in my Sig P238. A great improvement to the factory nylon trigger.

THIS WILL FIT THE SIG P238! nice piece! (07/03/2012)

I had asked the question about whether or not this would fit the new Sig P238, but the response was NO. I decided that my curiousity would not let that deter me from trying it out... After all the Wolff springs will fit both the Colt and the Sig. This went in without a problem and worked out very well. The only thing that I would add to this part (and I am surprised that it was not added) would be an overtravel screw at the bottom. I installed my own and it makes a huge difference. Also, one in a parkerized black would be sweet as well. If Cylinder and Slide decide to machine one in, please send one to me !! and Brownells, advertise this for the Sig P238 also.

A lot better (02/04/2012)

Much better than the factory plastic junk trigger that brakes.

If you have a Colt 380 buy this now. (06/04/2012)

If you have a Colt 380 buy this now. The cheap plastic trigger that comes in the gun will brake some day. You do not what that to be the day you need it.

Works ok in a government pocketlight. (27/07/2012)

mine had some metal shavings in the nooks and the mounting pin holes shifted the trigger lever back a few mils causing it to get stuck on the ejector clip preventing the trigger from resetting. It only happened when you fired it with live rounds too. Work just fine dry firing. Took me a while to find that one. I fixed that by rounding the corners on the trigger bar bracket. I hit it with some 1100 grit sandpaper to shine it up a bit and get it to slide in a little easier when installing

P938 (10/09/2012)

I read some things about possible using this in the Sig p938. I took the chance and replaced the plastic trigger in the P938 and this one works great. I have also read you can use this in the p238 as well.

Worsened the trigger in P238 (08/11/2014)

I think My upgraded trigger must have been overbored where the trigger spring goes, it seems to have slightly increased the amount of slop and creep, giving the P238 slightly more spongy feeling, and not as crisp as the stock plastic trigger.

I can hear the spring grating on the inside of the trigger as well, none of this happened with the stock plastic piece.

I'm leaving it in for now, to see how this performs at the range.

On a positive side note, trigger breaks at slightly lower weight now, but I didnt put up the trigger gauge pre or post.

Edit: removed the trigger, lubed up the spring and cleaned out the trigger spring area, seems to have improved the trigger and decreased sponginess, still not as crisp as stock though.

My Colt Mustang pocketlite serial no PL1147XX comes with anodized aluminum trigger and did not need to be replaced

Needs to be fit. (11/08/2017)

This is the third trigger that I have installed in a Mustang made by Cylinder and Slide.This one was the worst.The trigger bar slot had to be fit, the Spring hole had to be fit and the pivot hole had to be fit. I think their tooling has to be replaced.

Leggi più recensioni su brownells.com

59.9 59.9 1 EUR

N. prodotto: 206000020
CYLINDER & SLIDE ALUMINUM COLT .380 TRIGGER
Parti Fabbricante: CS311 000000003117 Resistente grilletto in alluminio lavorato CNC, facile da sostituire rispetto al grilletto in nylon/plastica di fabbrica Colt per una maggiore durabilità e una sensazione di azionamento più solida. Utilizzabile come miglioramento singolo o parte di un lavoro completo sul grilletto. L'installazione può richiedere leggere modifiche; elimina completamente l'usura prematura del grilletto e la rottura al foro del perno di pivot.

59.9 EUR 2 59,90 € *

Tempi di consegna circa 12-16 giorni.
2 pz. nel magazzino USA

Caratteristiche: Adatto per: Colt Finitura: Silver Modello: Government, Mustang Tipo: Scanalato

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Top takeaways

Grilletto in alluminio lavorato CNC, più resistente e solido rispetto al grilletto di fabbrica in nylon/plastica Colt.
Compatibile con i modelli Colt .380 Government e Mustang, finitura argento opaco.
Elimina l'usura prematura del grilletto e la rottura al foro del perno di pivot, ma potrebbe richiedere leggere modifiche per l'installazione.

Caratteristiche

Adatto per: Colt Finitura: Silver Modello: Government,Mustang Tipo: Scanalato Peso della spedizione: 0,005kg Altezza di spedizione: 5mm Larghezza di spedizione: 79mm Lunghezza di spedizione: 155mm UPC : 000000003117

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.c

Migliora il tuo Colt .380 con il grilletto in alluminio CNC. 🔧 Resistente e facile da installare per una sensazione di azionamento superiore.

Replaces The Plastic Factory Part For Better Wear, Improved "Feel"

SPECS: Aluminum, matte silver. Fits Colt .380 Government and Mustang models.

Altro...

Sostituisce il pezzo di fabbrica in plastica per una maggiore resistenza e un "tocco" migliorato

SPECS: Alluminio, argento opaco. Compatibile con i modelli Colt .380 Government e Mustang.

Altro...

Punteggi dei clienti per CYLINDER & SLIDE ALUMINUM COLT .380 TRIGGER

Numero di punteggi: 8
Da brownells.com: 8
Punteggio medio: 4,1

I would and did buy this product again (21/04/2010)

Fits perfect in my Sig P238. A great improvement to the factory nylon trigger.

THIS WILL FIT THE SIG P238! nice piece! (07/03/2012)

A lot better (02/04/2012)

Much better than the factory plastic junk trigger that brakes.

If you have a Colt 380 buy this now. (06/04/2012)

If you have a Colt 380 buy this now. The cheap plastic trigger that comes in the gun will brake some day. You do not what that to be the day you need it.

Works ok in a government pocketlight. (27/07/2012)