Il Carrello è vuoto.

Carrello

Aiuto e contatti

Reso facile

Newsletter

Offerte

Oltre 300.000 clienti - vi ringraziamo!

4,93/5 "Molto buono" (1400+ recensioni)

Oltre 40.000 prodotti per caccia e sport di tiro

EGW
ANGLED BORED BUSHING WITH CARRY BEVEL

841370103379 296000066

Pre-Machined With The Proper Lockup Angle

Beveled flange looks right on melted guns. Bored at an angle to prevent barrel bind for smooth cycling. Provides a snug drop-in between barrel and bushing.

SPECS: Stainless steel. .580" (14.7mm) I.D., .70" (17.8mm) O.D.

Altro...

Pre-lavorato con il corretto angolo di chiusura

La flangia smussata si adatta perfettamente alle armi con finitura melted. Forato con un angolo specifico per prevenire il bloccaggio della canna, garantendo un ciclo di sparo fluido. Fornisce un perfetto inserimento a scatto tra canna e bushing.

SPECIFICHE: Acciaio inossidabile. Diametro interno .580" (14,7mm), diametro esterno .70" (17,8mm).

Altro...

Punteggi dei clienti per EGW CARRY BEVEL BUSHING, GOVT

Numero di punteggi: 11
Da brownells.com: 11
Punteggio medio: 5

With Some Help From .... (13/12/2011)

a bushing wrench, the EGW bushing replaced the stock bushing without any fitting. Did touch up the edges, as they were rather sharp. The barrel fit was to say the least, spot on. Flange on front of bushing is much thicker to extend to the crown of the barrel. Nice beveled edge on flange.

Great Fit! (20/12/2012)

The bushing was for a Colt Combat Commander. It was a tight fit, but it did not require tuning. However, a bushing wrench is necessary due to the tight fit.

fit like a glove (22/02/2010)

Specs are perfect, I.D and O.D. Looks great and fits even better. Couldn't be happier Installed on a Kimber classic custom target with a better fit than the original bushing. A++++

great product (12/12/2011)

i use this bushing with great results in my shop. i use this part # a lot

Excellent (04/05/2012)

About 20 min of fitting on my Colt Govt. model tight fit. Extra thickness has made the barrel flush, Functions great, looks even better. Highly recommended.

Works as good as it looks. (15/08/2012)

This is a nice bushing. Snug fit to the slide and minimal fitting to the barrel.

Fit my RIA 1911 A1 FS perfectly (26/09/2012)

This EGW SS bushing fit my newer RIA 1911-A1 FS perfectly; tighter fit than the original RIA bushing, needed a bushing tool to help seat it, but was not too tight. Fits perfectly with the EGW long nose solid spring plug.

Quality bushing (17/07/2013)

I put this bushing on my Magnum Research 1911. It fit the slide perfectly but required minor fitting for the barrel. It's much tighter than the factory bushing and it looks great on a black gun! I highly recommend this product.

Top of the line product (18/07/2013)

I ordered this bushing and the long nose plug also for my Citadel 1911 A1. With the factory bushing the pistol would print a 3.85 inch group at 25 yards from a bench rest sand bag. I received the EGW bushing and plug yesterday, installed it and went directly to the range. The pistol now prints a 2.65 inch group at 25 yards from the bench rest.

No problems what so ever installing and perfect functioning with no fails to feed or extract.

Best bang for the buck for an accuracy upgrade.

Closer to match fit for Kimber 1911s (20/12/2014)

This is a great upgrade for slightly tighter barrel fitting on a Kimber 1911, but you may need to fit the OD to allow it to go into slide. I was able to drop it into 1 of 3 Kimbers slides that I tried. It is very tight on the one that it does go into.

Another thing I like is the fact there is no writing stamped into exterior. It is nice and clean. Ed Brown and Wilson both stamp their names on exterior of bushing.

Best 1911 bushing on this planet. (13/03/2016)

Order it now.

Smile forever.

Enough said.

Leggi più recensioni su brownells.com

43.9 44.9 2 EUR

N. prodotto: 296000066
EGW CARRY BEVEL BUSHING, GOVT
Parti Fabbricante: 14212A 841370103379 La flangia smussata si adatta perfettamente alle armi con finitura melted. Forato con un angolo specifico per prevenire il bloccaggio della canna, garantendo un ciclo di sparo fluido. Fornisce un perfetto inserimento a scatto tra canna e bushing.

43.9 EUR 5 43,90 € *

Tempi di consegna circa 12-16 giorni.
5 pz. nel magazzino USA

Caratteristiche: Adatto per: 1911 Finitura: Acciaio inox Modello: Government Tipo: Angled

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Caratteristiche

Adatto per: 1911 Finitura: Acciaio inox Modello: Government Tipo: Angled Peso della spedizione: 0,005kg Altezza di spedizione: 20mm Larghezza di spedizione: 76mm Lunghezza di spedizione: 122mm UPC : 841370103379

Dettagli dell'elemento

Made in Usa

Operatore economico responsabile secondo il regolamento UE

Brownells
Via Mezzavilla 4
25043 Breno
Italia
service@brownells.it

N. prodotto: 296000067
EGW CARRY BEVEL BUSHING, COMMANDER
Parti Fabbricante: 14212C 841370103386 La flangia smussata si adatta perfettamente alle armi con finitura melted. Forato con un angolo specifico per prevenire il bloccaggio della canna, garantendo un ciclo di sparo fluido. Fornisce un perfetto inserimento a scatto tra canna e bushing.

44.9 EUR 4 44,90 € *

Tempi di consegna circa 12-16 giorni.
4 pz. nel magazzino USA

Caratteristiche: Adatto per: 1911 Finitura: Acciaio inox Modello: Commander Tipo: Angled

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Scopri la Boccola Angled Bored di EGW! ✨ Perfetta per 1911, garantisce un ciclo di sparo fluido e un inserimento a scatto impeccabile.

Pre-Machined With The Proper Lockup Angle

Beveled flange looks right on melted guns. Bored at an angle to prevent barrel bind for smooth cycling. Provides a snug drop-in between barrel and bushing.

SPECS: Stainless steel. .580" (14.7mm) I.D., .70" (17.8mm) O.D.

Altro...

Pre-lavorato con il corretto angolo di chiusura

SPECIFICHE: Acciaio inossidabile. Diametro interno .580" (14,7mm), diametro esterno .70" (17,8mm).

Altro...

Punteggi dei clienti per EGW CARRY BEVEL BUSHING, GOVT

Numero di punteggi: 11
Da brownells.com: 11
Punteggio medio: 5

With Some Help From .... (13/12/2011)

Great Fit! (20/12/2012)

The bushing was for a Colt Combat Commander. It was a tight fit, but it did not require tuning. However, a bushing wrench is necessary due to the tight fit.

fit like a glove (22/02/2010)

Specs are perfect, I.D and O.D. Looks great and fits even better. Couldn't be happier Installed on a Kimber classic custom target with a better fit than the original bushing. A++++

great product (12/12/2011)

i use this bushing with great results in my shop. i use this part # a lot

Excellent (04/05/2012)

About 20 min of fitting on my Colt Govt. model tight fit. Extra thickness has made the barrel flush, Functions great, looks even better. Highly recommended.

Works as good as it looks. (15/08/2012)

This is a nice bushing. Snug fit to the slide and minimal fitting to the barrel.

Fit my RIA 1911 A1 FS perfectly (26/09/2012)