Designed by champion shooter Chip McCormick with his unique, flat follower to give more capacity. All feature a fixed base that's drilled for easy pad installation. All springs are by Wolff.
Progettati dal campione di tiro Chip McCormick con il suo esclusivo elevatore piatto per offrire maggiore capacità. Tutti presentano una base fissa che è forata per facilitare l'installazione del pad. Tutte le molle sono di Wolff.
SPECS: Acciaio inossidabile, finitura opaca. .45 Gov’t - 5" (12,7 cm) di lunghezza, 5½" (13,3 cm) con il pad, 8 colpi.
Altro...
Punteggi dei clienti per CHIP MCCORMICK CUSTOM MATCH GRADE, .45 ACP, 8 ROUND, STAINLESS, W/ PAD
Numero di punteggi: 8
Da brownells.com: 8
Punteggio medio: 4,3
1911 magazines(23/06/2009)
These work great, no issues. Excellent mags
Range use ONLY!!(02/02/2010)
I own several of these mags. When they are NEW they work fine but after only a few dozen times of loading & unloading, the distance in the feed ramp begins to close and then they start to fail. Mine began to tilt, which caused the weapon to fail. I tried spacing the mags back out but this didn't work for long. Now they are nothing more than range mags used to produce malfunctions to practice clearing procedures. For no reason would I use them for carry purposes, even new.
Not Worth It(09/08/2010)
Hello,
I bought two of these, and have seen several more.
One of the ones I bought had a warped body and would not fall free. The other worked as advertised - for a while.
Feeding and slide lock became issues after a few hundred rounds apiece. I traced this to the followers; replacing them with standard dimpled followers from seven round military magazines made them work, and work well.
Bottom line: The bodies are good about half the time. They will not be so warped as to prevent feeding, though they may not fall free. The followers and springs should be replaced with quality seven round aftermarket parts.
I'm amazed....(03/06/2011)
...that these magazines have ANY poor reviews.
I've used many Shooting Star mags over the years and they are the best value there is out there.
There are more expensive mags. There are fancier mags. I haven't had one not work yet...and without "tuning." If your gun is set up right, these mags run.
Great Mags(19/12/2012)
These mags are terrific! I have used them over about the last 12 years and they are the only mags I use in my Colt and S.A. 1911's. I have had the blued steel and stainless and both types have worked great. They cycle fine,fit great and drop free on their own, even the older ones.
second purchase(25/12/2012)
I bought CMC magazines in the past, and have had no issues. When I needed more magazines for work, I did not hesitate to buy CMC magazines again.
Works perfect with a PM7(03/04/2018)
To be honest this mag looks identical to the standard Dan Wesson mags that comes with my PM7. The end plate is definitely different but the rest of the magazine frame, the follower and the spring are almost identical.
Worked pretty flawlessly with my pm7 too. Iâm happy.
My only complains are the follower is metal and the end plate looks awkward when it was seated in my pistol
N. prodotto: 207145218 CHIP MCCORMICK CUSTOM MATCH GRADE, .45 ACP, 8 ROUND, STAINLESS, W/ PAD Parti Fabbricante: M-MG-45FS8-P705263141117 Progettati dal campione di tiro Chip McCormick con il suo esclusivo elevatore piatto per offrire maggiore capacità. Tutti presentano una base fissa che è forata per facilitare l'installazione del pad. Tutte le molle sono di Wolff.
69.9EUR1269,90 €
*
Tempi di consegna circa 12-16 giorni. Più di 10 pz. nel magazzino USA
Adatto per:
1911
Capacità:
8-colpi
Cartuccia:
45 Aua (ACP)
Finitura:
Silver
Materiale:
Acciaio inox
Modello:
Commander,Government
Peso della spedizione: 0,068kgAltezza di spedizione: 10mmLarghezza di spedizione: 66mmLunghezza di spedizione: 150mm
UPC
: 705263141117
Dettagli dell'elemento
Made in Usa
Classificazione per l'export dagli US: 0A501.x
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
N. prodotto: 207145208 CHIP MCCORMICK CUSTOM .45 GOV'T NO PAD Parti Fabbricante: M-MG-45FS8705263141100 Progettati dal campione di tiro Chip McCormick con il suo esclusivo elevatore piatto per offrire maggiore capacità. Tutti presentano una base fissa che è forata per facilitare l'installazione del pad. Tutte le molle sono di Wolff.
64.9EUR864,90 €
*
Tempi di consegna circa 12-16 giorni. 8 pz. nel magazzino USA
Adatto per:
1911
Capacità:
8-colpi
Cartuccia:
45 Aua (ACP)
Finitura:
Silver
Materiale:
Acciaio inox
Modello:
Commander,Government
Peso della spedizione: 0,068kgAltezza di spedizione: 10mmLarghezza di spedizione: 58mmLunghezza di spedizione: 112mm
UPC
: 705263141100
Dettagli dell'elemento
Made in Usa
Classificazione per l'export dagli US: 0A501.x
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Scopri il caricatore 1911 8RD .45 ACP di Chip McCormick. Massima capacità e qualità in acciaio inox per prestazioni superiori! ✨
Designed by champion shooter Chip McCormick with his unique, flat follower to give more capacity. All feature a fixed base that's drilled for easy pad installation. All springs are by Wolff.
Progettati dal campione di tiro Chip McCormick con il suo esclusivo elevatore piatto per offrire maggiore capacità. Tutti presentano una base fissa che è forata per facilitare l'installazione del pad. Tutte le molle sono di Wolff.
SPECS: Acciaio inossidabile, finitura opaca. .45 Gov’t - 5" (12,7 cm) di lunghezza, 5½" (13,3 cm) con il pad, 8 colpi.
Altro...
Punteggi dei clienti per CHIP MCCORMICK CUSTOM MATCH GRADE, .45 ACP, 8 ROUND, STAINLESS, W/ PAD
Numero di punteggi: 8
Da brownells.com: 8
Punteggio medio: 4,3
1911 magazines(23/06/2009)
These work great, no issues. Excellent mags
Range use ONLY!!(02/02/2010)
I own several of these mags. When they are NEW they work fine but after only a few dozen times of loading & unloading, the distance in the feed ramp begins to close and then they start to fail. Mine began to tilt, which caused the weapon to fail. I tried spacing the mags back out but this didn't work for long. Now they are nothing more than range mags used to produce malfunctions to practice clearing procedures. For no reason would I use them for carry purposes, even new.
Not Worth It(09/08/2010)
Hello,
I bought two of these, and have seen several more.
One of the ones I bought had a warped body and would not fall free. The other worked as advertised - for a while.
Feeding and slide lock became issues after a few hundred rounds apiece. I traced this to the followers; replacing them with standard dimpled followers from seven round military magazines made them work, and work well.
Bottom line: The bodies are good about half the time. They will not be so warped as to prevent feeding, though they may not fall free. The followers and springs should be replaced with quality seven round aftermarket parts.
I'm amazed....(03/06/2011)
...that these magazines have ANY poor reviews.
I've used many Shooting Star mags over the years and they are the best value there is out there.
There are more expensive mags. There are fancier mags. I haven't had one not work yet...and without "tuning." If your gun is set up right, these mags run.
Great Mags(19/12/2012)
These mags are terrific! I have used them over about the last 12 years and they are the only mags I use in my Colt and S.A. 1911's. I have had the blued steel and stainless and both types have worked great. They cycle fine,fit great and drop free on their own, even the older ones.
second purchase(25/12/2012)
I bought CMC magazines in the past, and have had no issues. When I needed more magazines for work, I did not hesitate to buy CMC magazines again.
Works perfect with a PM7(03/04/2018)
To be honest this mag looks identical to the standard Dan Wesson mags that comes with my PM7. The end plate is definitely different but the rest of the magazine frame, the follower and the spring are almost identical.
Worked pretty flawlessly with my pm7 too. Iâm happy.
My only complains are the follower is metal and the end plate looks awkward when it was seated in my pistol