Il Carrello è vuoto.

Carrello

Aiuto e contatti

Reso facile

Newsletter

Offerte

Oltre 300.000 clienti - vi ringraziamo!

4,93/5 "Molto buono" (1400+ recensioni)

Oltre 40.000 prodotti per caccia e sport di tiro

ALANGATOR.
10/22® TRIMAG MAGAZINE COUPLER

736211949219 100005354

Clamps Together Three Factory Magazines For Fast Reloads

Low-profile, molded polymer coupler clamps together three factory 10/22® magazines to put 30 rounds at your fingertips for super-fast reloads without fumbling for the next mag. More economical and less bulky than high-cap “banana” magazines, and easy to use. Slide the mags onto the TriMag and secure them by tightening the stainless steel crossbolt with a slot-head screwdriver or even a coin. Loosen the bolt to release the magazines for single use again. Get the Ruger® 10/22® Trimag Pouch.

SPECS: Polymer, matte black. Approximately 1¾" (4.5cm) long, 1½" (3.8cm) wide. 1 oz. (69g) wt.

Altro...

Accoppia Insieme Tre Caricatori Di Fabbrica Per Ricariche Veloci

Accoppiatore a basso profilo in polimero modellato che stringe insieme tre caricatori di fabbrica 10/22® per avere a portata di mano 30 colpi per ricariche super veloci senza dover cercare il caricatore successivo. Più economico e meno ingombrante rispetto ai caricatori ad alta capacità "banana", ed è facile da usare. Fai scorrere i caricatori sul TriMag e fissali stringendo il bullone in acciaio inossidabile con un cacciavite a taglio o anche una moneta. Allenta il bullone per rilasciare i caricatori per l'uso singolo di nuovo. Procurati la custodia per Ruger® 10/22® TriMag.

SPECIFICHE: Polimero, nero opaco. Lunghezza approssimativa 1¾" (4,5 cm), larghezza 1½" (3,8 cm). Peso 1 oz. (69g).

Altro...

Punteggi dei clienti per ALANGATOR. TRIMAG 10/22® MAG COUPLER

Numero di punteggi: 12
Da brownells.com: 12
Punteggio medio: 4,8

Great idea (15/06/2010)

Love these things. Unlike other coupler products, this one does not require any glue and holds the mags conveniently. A+

Good mag coupler (09/09/2010)

Holds mags together positively. Goes together and comes apart with a flat-head screwdriver, which is needed to strip the 10/22 anyway. No glue or tape needed.

The only downside is the screw in the middle is aluminum, but then again, you aren't supposed to over-tighten it, so it's a non-issue.

TriMag Coupler in Competition (08/11/2010)

I used the TriMag at the 2010 Ruger Rimfire Championships. I normally shoot competition pistol, but I was talked into buying a 10/22 and shooting this match by a friend. As the match had a 10 round limit for magazines, the TriMag turned out to be the way to go for fast reloads. In addition to the fast reloads, the setup allows the system acts like a tripod. I was able to set the rifle on a barrel in an upright position for a fast start when the buzzer went off, no tripod needed. Cool stuff!

Dang it, now I'm hooked! I plan on getting several more as backups!

Flawless (02/02/2011)

Theres almost nothing to complain about, the only thing is the colour of the screw.

Very good and an excellent idea but... (18/03/2011)

Good stuff just wish they made a 2 magazine version.
the only bad thing I can say about them is that they interfer with the Buttlercreek foldingstock.
so it is not possible to have it folded while the magazine with the coupler are inserted to the gun.

but other then that superb!

Works GREAT. Condense your 10rnd Mags. (07/07/2011)

I purchased 1 of these to try, and once I had it at the range I decided to buy 6 more. I've been filling a box with my 10rnd Ruger Mags over the years and these are a GREAT way to condense those magazines into a usable product again. The 3 mags combined don't hang as low as a single 26rnd Ruger or Butler Creek Mag. I find these a valuable addition to any 10/22, 77/22 or 96/22 Shooter with a pile of old factory mags.

Outstanding Product (16/07/2011)

This has got to be one of the best new products to hit the market in recent years. Outstanding guality, fair price and ease of use. I cannot say enough to praise this item. JUST BUY IT.

30 rounds and no banana mag! (09/08/2011)

I purchased to use with a bi-pod. I Recommend an extended mag release to aid with ease of re-charging rifle.

No High Capacity Troubles! (02/02/2012)

Works great and is especially good for those of you who live in states which restrict high capacity magazines. :)

Snug fit (06/05/2012)

Connects and holds together up to three standard 10-round Ruger hot-lips mags. Gives you 30 rouns capacity but doesn't protrude as far down as a std 30 round mag. Great for benchrest shooting

Good product (24/04/2014)

Just received this today. While I haven't shot my 10/22 utilizing it, there isn't much that can go wrong with it, and I really like the concept. This is a very secure platform for 3 mags and I have no doubts that it will perform as advertised. I don't have anything negative to say about this product, buy it!

Clever idea (22/09/2015)

This is the second TriMag I order. It holds the mags very securely plus makes it easier to manipulate in and out of the magazine well. Well thought out, well made product. It allows for 30 rounds without sticking out like the 25 round banana magazines. Makes a difference when shooting off short bipod.

BTW, it is the second because I bought more mags, first one is still holding out well.

Luisyamaha

Leggi più recensioni su brownells.com

36.9 36.9 1 EUR

N. prodotto: 100005354
ALANGATOR. TRIMAG 10/22® MAG COUPLER
Parti Fabbricante: NONE 736211949219 Accoppiatore a basso profilo in polimero modellato che stringe insieme tre caricatori di fabbrica 10/22® per avere a portata di mano 30 colpi per ricariche super veloci senza dover cercare il caricatore successivo. Più economico e meno ingombrante rispetto ai caricatori ad alta capacità "banana", ed è facile da usare. Fai scorrere i caricatori sul TriMag e fissali stringendo il bullone in acciaio inossidabile con un cacciavite a taglio o anche una moneta. Allenta il bullone per rilasciare i caricatori per l'uso singolo di nuovo. Procurati la custodia per Ruger® 10/22® TriMag.

36.9 EUR 26 36,90 € *

Tempi di consegna circa 12-16 giorni.
Più di 10 pz. nel magazzino USA

Caratteristiche: Adatto per: Ruger Colore: Nero Modello: 10/22

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Top takeaways

Accoppiatore in polimero modellato che unisce tre caricatori 10/22® per avere 30 colpi pronti per ricariche rapide.
Più economico e meno ingombrante rispetto ai caricatori ad alta capacità "banana", facile da usare con un cacciavite o una moneta.
Specifiche: polimero nero opaco, lunghezza 4,5 cm, larghezza 3,8 cm, peso 69g.

Caratteristiche

Adatto per: Ruger Colore: Nero Modello: 10/22 Peso della spedizione: 0,023kg Altezza di spedizione: 38mm Larghezza di spedizione: 46mm Lunghezza di spedizione: 66mm UPC : 736211949219

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.x

Scopri il TRIMAG Magazine Coupler Alangator per 30 colpi di Ruger 10/22®! 🎯 Facile da usare e compatto, ideale per ricariche rapide.

Clamps Together Three Factory Magazines For Fast Reloads

SPECS: Polymer, matte black. Approximately 1¾" (4.5cm) long, 1½" (3.8cm) wide. 1 oz. (69g) wt.

Altro...

Accoppia Insieme Tre Caricatori Di Fabbrica Per Ricariche Veloci

SPECIFICHE: Polimero, nero opaco. Lunghezza approssimativa 1¾" (4,5 cm), larghezza 1½" (3,8 cm). Peso 1 oz. (69g).

Altro...

Punteggi dei clienti per ALANGATOR. TRIMAG 10/22® MAG COUPLER

Numero di punteggi: 12
Da brownells.com: 12
Punteggio medio: 4,8

Great idea (15/06/2010)

Love these things. Unlike other coupler products, this one does not require any glue and holds the mags conveniently. A+

Good mag coupler (09/09/2010)

TriMag Coupler in Competition (08/11/2010)

Flawless (02/02/2011)

Theres almost nothing to complain about, the only thing is the colour of the screw.

Very good and an excellent idea but... (18/03/2011)

Works GREAT. Condense your 10rnd Mags. (07/07/2011)

Outstanding Product (16/07/2011)

This has got to be one of the best new products to hit the market in recent years. Outstanding guality, fair price and ease of use. I cannot say enough to praise this item. JUST BUY IT.

30 rounds and no banana mag! (09/08/2011)

I purchased to use with a bi-pod. I Recommend an extended mag release to aid with ease of re-charging rifle.

No High Capacity Troubles! (02/02/2012)

Works great and is especially good for those of you who live in states which restrict high capacity magazines. :)

Snug fit (06/05/2012)

Connects and holds together up to three standard 10-round Ruger hot-lips mags. Gives you 30 rouns capacity but doesn't protrude as far down as a std 30 round mag. Great for benchrest shooting

Good product (24/04/2014)