Il Carrello è vuoto.

Carrello

Aiuto e contatti

Reso facile

Newsletter

Offerte

Oltre 300.000 clienti - vi ringraziamo!

4,93/5 "Molto buono" (1400+ recensioni)

Oltre 40.000 prodotti per caccia e sport di tiro

BROWNELLS
AR-15 BILLET 7075 TRIGGER GUARD

078101164

AR-15 Billet 7075 Trigger Guard ready for installation. Includes roll pin & screw for installation on standard AR-15 lower receivers. Machined from 7075 aluminum and has a matte black anodized finish.

Altro...

Guardamonte Billet 7075 per AR-15 pronto per l'installazione. Include perno cilindrico e vite per il montaggio su lower receiver standard AR-15. Fresato in alluminio 7075 e presenta una finitura anodizzata opaca nera.

Altro...

Punteggi dei clienti per BROWNELLS AR-15 BILLET 7075 TRIGGER GUARD

Numero di punteggi: 6
Da brownells.com: 5
Punteggio medio: 4,7

TOP (12/04/2019)

Been looking for a while for this type of trigger guard, as you can see the wider part is reversed (compared to a magpul trigger guard) and is exactly what i was looking. fit is perfect, guard is very thick and aggressive, makes handling very comfortable especially with heavier rifles. Absolutely top item!! recommended all the way.

Good buy! (17/12/2017)

I had another AR trigger guard on backorder for sometime, so I decided to order one of these. I'm glad I did! More than enough room for a fingered glove, it looks good & it Installs easily and fit the Aero lower just fine. I ordered another for my other AR too. I've seen reviews where guys bemoan installing an AR trigger guard......Support the underside properly, use the correct roll pin punch and you won't have any cracked ears or other problems. Some common sense in installing many of the parts on a lower receiver goes a long way!

Perfect (01/01/2018)

Increased amount of room to better accommodate a gloved hand. Appears to be high quality construction. Fit perfect with no alteration required and looks good. No problems so far.

Out of spec or just really tight? (09/07/2018)

Product looks good, but man that roll pin hole is so tight, I could not get the roll pin to go in. I pulled the trigger guard out and even without the lower receiver involved, the roll pin still would not go into the trigger guard. I applied a LOT of force and resorted to the c-clamp trick which ended up working but mangled the roll pin and now I have a sharp spot.

Excellent Trigger Guard (30/07/2018)

At half the cost of Magpul, this billet aluminum trigger guard is a bargain. Installation is simple and the anodizing matches LMT lowers perfectly. Sure it doesnât score cool points like KAC, but it permits gloved operation, does not require fitting with mil-spec lowers, and isnât gaudy like other options. Highly recommended!

Tip: Use coil pins and a starter punch to make trigger guard installations a breeze.

Very disappointing to me, (08/08/2018)

First of all, my title and rating seem incongruous, but they are in fact totally accurate to me. The Brownell's trigger guard is well made, easy to install, and nothing wrong with it other than it is not the look that I wanted, not at all.

When I saw the Brownell's trigger guard at half the price of the Mag-Pul Enhanced aluminum TG, and seemingly shaped the same, I jumped on two of them. I Duracoated them in FDE and installed them on the lower. That's when I noticed the "belly" of the trigger guard is reverse that of the Mag-Pul. To me it looks backwards since all my other TGs are Mag-Pul with the "belly" in the center or or rear of center and below the trigger. The Brownell's has the "belly" forward of the trigger. It might actually work better with gloved hands than the Mag-Pul, but to me it looks bass-ackwards and unacceptable for my tastes. Since I Duracoated and installed them I am not going to embarrass myself asking for a return, but I will be ordering the Mag-Pul immediately. My fault totally, Brownell's clearly shows them with the belly to the front, but I did not pay close enough attention before ordering, but if you are looking for a cheaper priced Mag-Pul style trigger guard, this one is not it. Otherwise, it is an excellent trigger guard, hence the 5 star rating, but for me, I'm very disappointed.

Leggi più recensioni su brownells.com

0 0 1 EUR

N. prodotto: 078101164
BROWNELLS AR-15 BILLET 7075 TRIGGER GUARD
Parti Fabbricante: 707600014121 Guardamonte Billet 7075 per AR-15 pronto per l'installazione. Include perno cilindrico e vite per il montaggio su lower receiver standard AR-15. Fresato in alluminio 7075 e presenta una finitura anodizzata opaca nera.

Avvisa quando diventa disponibile

Non disponibile.

Caratteristiche: Adatto per: AR-15 Finitura: Nero

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Caratteristiche

Adatto per: AR-15 Finitura: Nero Peso della spedizione: 0,014kg Altezza di spedizione: 25mm Larghezza di spedizione: 51mm Lunghezza di spedizione: 89mm

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.x

Operatore economico responsabile secondo il regolamento UE

Brownells
Via Mezzavilla 4
25043 Breno
Italia
service@brownells.it

Scopri il guardamonte Billet 7075 per AR-15 di BROWNELLS! 🔧 Facile da installare e realizzato in alluminio anodizzato per una durata superiore.

Altro...

Punteggi dei clienti per BROWNELLS AR-15 BILLET 7075 TRIGGER GUARD

Numero di punteggi: 6
Da brownells.com: 5
Punteggio medio: 4,7

TOP (12/04/2019)

Good buy! (17/12/2017)

Perfect (01/01/2018)

Increased amount of room to better accommodate a gloved hand. Appears to be high quality construction. Fit perfect with no alteration required and looks good. No problems so far.

Out of spec or just really tight? (09/07/2018)