SR25 Pattern 308 Magazine chambered in .308. The magazine body is made from steel and available in either 10 (Orange Follower) or 20 (Green Follower) rounds.
Altro...
Caricatore SR25 Pattern 308 camerato in .308. Il corpo del caricatore è realizzato in acciaio ed è disponibile sia da 10 (seguace arancione) che da 20 (seguace verde) colpi.
Altro...
Punteggi dei clienti per D&H INDUSTRIES 6.5 CREEDMOOR/.308 MAGAZINE 10-RD STEEL BLACK
Numero di punteggi: 8
Da brownells.com: 8
Punteggio medio: 3,8
Works fine in my PA-10 gen2(28/12/2017)
Bought one to give it a go in my newest toy (Palmeto State Armory gen 2 PA-10). So far zero issues, boring like its suppose to be in other words. It drops free and the bolt holds open on last round. Finish is actually rather nice. Who knows how it holds up long term but so far so good. The thing seems solid in a brick like fashion. The only draw back for me is that it is noticeably heavier than say, a 20 round Pmag while at the same time taking up way less vertical space.
Bottom line.... Good looking, functional mag that seems tough, while weighing a couple ounces more than the biggest plastic competitor. Ya, I'm buying more for my PA-10.
works in Galil ACE and PSA G2 in 7.62x51(17/03/2018)
If you want steel feed lips the D&H 20rd mag is 7 oz and Lancer LWM 20rd is 6 oz.
D&H has functioned fine and is half the cost of a Lancer mag.
awesome mags !(09/04/2018)
These mags are burly , they DO hold 20 and they DO load on a closed bolt when loaded with 20 rounds. Orange follower is easy to see in the dark recesses of the upper receiver . Just shy of 9 ounces.....labeled viewing holes cut in the body of the mag ...10,15 and 20........what is not to like ?
This magazines issue isn't the magazines fault, I have an Armalite AR-10A and the magazines are TIGHT in the mag well, as in non-dropfree tight. Again, not the fault of the magazine, just the variation of different rifle manufacturers.
Does Not Fit DPMS RFLR G2B24(28/04/2018)
I have a DPMS RFLR G2B24. I bought one of these to evaluate since the ones with the light green follower are no longer available; those fit the rifle without any problems. This one requires too much force to insert it into the magazine well; itâs just too tight. Removal is very difficult; it does not fall free.
I should mention that I bought one of the 10 round versions of the magazine and that one fits the rifle without any problems. It inserts easily and falls free when the magazine release is pressed.
The overall construction is excellent. It has an orange, anti-tilt follower and holes to view the approximate number of cartridges. The magazine is 3/8â longer than the previous model with the light green follower. Unfortunately, the magazine I received is missing the right forward follower stop, i.e. broken off. The stop is about half the size of the model with the light green follower and may be an indication of a design flaw that makes it too fragile and subject to failure.
Returned for credit.
They fall out(07/10/2018)
I bought 3 of these mags FOR AN AR-10. My advice...DON'T BUY THEM!!!
Your wasting your money. When the rifle is fired they just fall out. Happens every time I pull the trigger. Then I found that I can just pull them out of the weapon without pressing the release button. At first I thought just one had the problem but after testing all 3 they all pull out with only slight effort. They all seat and the catch settles into the retaining hole but with a little pull and a wiggle they just come right out. I thought that the mag retainer had a problem so I tested all my PMAGS. Not one of them failed.
DON'T PURCHASE THEM!!!!
Solid Construction(15/02/2017)
I love this solid steel construction!!!
Satisfied (07/08/2018)
Fits great in my anodize Noreen lower. Freely drops out when called to do so. Holds bolt back on last round fires. When filled to capacity, I can push it in on a closed bolt. Good bench shooting mag. Dependable so far.
N. prodotto: 100022696 D&H INDUSTRIES 6.5 CREEDMOOR/.308 MAGAZINE 10-RD STEEL BLACK Parti Fabbricante: DHT-12132-RT766897411304 Caricatore SR25 Pattern 308 camerato in .308. Il corpo del caricatore è realizzato in acciaio ed è disponibile sia da 10 (seguace arancione) che da 20 (seguace verde) colpi.
43.9EUR13443,90 €
*
Tempi di consegna circa 12-16 giorni. Più di 10 pz. nel magazzino USA
Caratteristiche:Adatto per: AR .308Capacità: 10-colpiCartuccia: 308 WinchesterFinitura: NeroMateriale: AcciaioQuantità: 1
Adatto per:
AR .308
Capacità:
10-colpi
Cartuccia:
308 Winchester
Finitura:
Nero
Materiale:
Acciaio
Peso della spedizione: 0,156kgAltezza di spedizione: 38mmLarghezza di spedizione: 114mmLunghezza di spedizione: 273mm
UPC
: 766897411304
Dettagli dell'elemento
Made in Usa
Classificazione per l'export dagli US: 0A501.x
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
N. prodotto: 100023925 D&H INDUSTRIES SR25 PATTERN 308 STEEL MAGAZINE 20RD BLACK Parti Fabbricante: DHT-11848-RT850012639183 Caricatore SR25 Pattern 308 camerato in .308. Il corpo del caricatore è realizzato in acciaio ed è disponibile sia da 10 (seguace arancione) che da 20 (seguace verde) colpi.
41.9EUR43041,90 €
*
ATTENZIONE: prima dell'acquisto leggi l'informativa che trovi nel banner giallo in homepage! Per ordinare scrivi a assistenzaclienti@brownells.it inviando copia di documenti in corso di validità che attestino l'appartenenza ad una delle categorie autorizzate all'acquisto.
Caratteristiche:Adatto per: AR .308Capacità: 20-colpiCartuccia: 308 WinchesterFinitura: NeroMateriale: AcciaioQuantità: 1
SR25 Pattern 308 Magazine chambered in .308. The magazine body is made from steel and available in either 10 (Orange Follower) or 20 (Green Follower) rounds.
Altro...
Caricatore SR25 Pattern 308 camerato in .308. Il corpo del caricatore è realizzato in acciaio ed è disponibile sia da 10 (seguace arancione) che da 20 (seguace verde) colpi.
Altro...
Punteggi dei clienti per D&H INDUSTRIES 6.5 CREEDMOOR/.308 MAGAZINE 10-RD STEEL BLACK
Numero di punteggi: 8
Da brownells.com: 8
Punteggio medio: 3,8
Works fine in my PA-10 gen2(28/12/2017)
Bought one to give it a go in my newest toy (Palmeto State Armory gen 2 PA-10). So far zero issues, boring like its suppose to be in other words. It drops free and the bolt holds open on last round. Finish is actually rather nice. Who knows how it holds up long term but so far so good. The thing seems solid in a brick like fashion. The only draw back for me is that it is noticeably heavier than say, a 20 round Pmag while at the same time taking up way less vertical space.
Bottom line.... Good looking, functional mag that seems tough, while weighing a couple ounces more than the biggest plastic competitor. Ya, I'm buying more for my PA-10.
works in Galil ACE and PSA G2 in 7.62x51(17/03/2018)
If you want steel feed lips the D&H 20rd mag is 7 oz and Lancer LWM 20rd is 6 oz.
D&H has functioned fine and is half the cost of a Lancer mag.
awesome mags !(09/04/2018)
These mags are burly , they DO hold 20 and they DO load on a closed bolt when loaded with 20 rounds. Orange follower is easy to see in the dark recesses of the upper receiver . Just shy of 9 ounces.....labeled viewing holes cut in the body of the mag ...10,15 and 20........what is not to like ?
This magazines issue isn't the magazines fault, I have an Armalite AR-10A and the magazines are TIGHT in the mag well, as in non-dropfree tight. Again, not the fault of the magazine, just the variation of different rifle manufacturers.
Does Not Fit DPMS RFLR G2B24(28/04/2018)
I have a DPMS RFLR G2B24. I bought one of these to evaluate since the ones with the light green follower are no longer available; those fit the rifle without any problems. This one requires too much force to insert it into the magazine well; itâs just too tight. Removal is very difficult; it does not fall free.
I should mention that I bought one of the 10 round versions of the magazine and that one fits the rifle without any problems. It inserts easily and falls free when the magazine release is pressed.
The overall construction is excellent. It has an orange, anti-tilt follower and holes to view the approximate number of cartridges. The magazine is 3/8â longer than the previous model with the light green follower. Unfortunately, the magazine I received is missing the right forward follower stop, i.e. broken off. The stop is about half the size of the model with the light green follower and may be an indication of a design flaw that makes it too fragile and subject to failure.
Returned for credit.
They fall out(07/10/2018)
I bought 3 of these mags FOR AN AR-10. My advice...DON'T BUY THEM!!!
Your wasting your money. When the rifle is fired they just fall out. Happens every time I pull the trigger. Then I found that I can just pull them out of the weapon without pressing the release button. At first I thought just one had the problem but after testing all 3 they all pull out with only slight effort. They all seat and the catch settles into the retaining hole but with a little pull and a wiggle they just come right out. I thought that the mag retainer had a problem so I tested all my PMAGS. Not one of them failed.
DON'T PURCHASE THEM!!!!
Solid Construction(15/02/2017)
I love this solid steel construction!!!
Satisfied (07/08/2018)
Fits great in my anodize Noreen lower. Freely drops out when called to do so. Holds bolt back on last round fires. When filled to capacity, I can push it in on a closed bolt. Good bench shooting mag. Dependable so far.
ATTENZIONE: prima dell'acquisto leggi l'informativa che trovi nel banner giallo in homepage! Per ordinare scrivi a assistenzaclienti@brownells.it inviando copia di documenti in corso di validità che attestino l'appartenenza ad una delle categorie autorizzate all'acquisto.
ATTENZIONE: prima dell'acquisto leggi l'informativa che trovi nel banner giallo in homepage! Per ordinare scrivi a assistenzaclienti@brownells.it inviando copia di documenti in corso di validità che attestino l'appartenenza ad una delle categorie autorizzate all'acquisto.
26,00 €
24,00 € - 33,90 €
(Seleziona articoli in saldo!)
33,90 €
*
Tutti i prezzi sono comprensivi di Iva e oneri di importazione. Sono esclusi i costi di spedizione che verranno indicati nella procedura d'ordine.