These mounts are a customer overrun and have recoil lugs integrated. These are not dovetail scope mounts. Your gun must be drilled and tapped for this scope mount to work. This scope mount comes with Hex Head Metric 3.5 X .6 screws. These bases sit at approximately 0.35"" high and is not recommended for use with quick disconnect rings, due to the valley down the center. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002"". After machining; the mounts are sand blasted. The steel rails are Mil Spec parkerized for a durable rust resistant finish. This mount is only available in 20 MOA -for shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards. Compatible with Picatinny or Weaver scope rings. Add EGW HD Scope Rings to make it a complete package! Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately).
Mount per ottica SAKO TRG LA: robustezza e precisione per il tuo fucile
Questi mount sono un eccesso di produzione per clienti e dispongono di linguette di rinculo integrate. Non si tratta di mount per ottiche a dovetail. Il tuo fucile deve essere forato e filettato affinché questo mount funzioni correttamente.
Il mount per ottica è fornito con viti a testa esagonale metriche 3.5 x 0.6. Queste basi si trovano a un'altezza di circa 0.35" e non sono raccomandate per l'uso con anelli di sgancio rapido, a causa del solco centrale. I fori Picatinny percorrono l'intera lunghezza del rail, offrendo flessibilità al tiratore durante il montaggio degli anelli e di altri accessori.
I fori sono conformi alle specifiche MIL-STD 1913, mantenendo tolleranze di +/- 0.002". Dopo la lavorazione, i mount vengono sabbiati. I rail in acciaio sono trattati con un rivestimento Mil Spec per una finitura resistente alla ruggine.
Questo mount è disponibile solo in 20 MOA, ideale per tiri da 500 a 1000 yard. Durante la taratura del tuo fucile con un mount da 20 MOA, EGW consiglia di tarare a 200 yard. Compatibile con anelli per ottiche Picatinny o Weaver. Aggiungi gli Anelli HD EGW per completare il pacchetto!
Installazione: EGW raccomanda una coppia di 20 pollici-lbs e una goccia di loctite blu (loctite venduto separatamente).