Oltre 300.000 clienti - vi ringraziamo!

Oltre 40.000 prodotti per caccia e sport di tiro

100033848
The First Wrench of Its Kind
The TRG Action Wrench facilitates barrel removal for the Sako TRG-22/42 rifles. Now you can turn your TRG into a “switch-barrel” rifle with this wrench and a barrel vise. Gunsmiths can use this for barrel replacements and avoid fabricating their own wrench. This is one of the first and only action wrench available for the TRG rifles. It is intended to be used by those qualified to remove and install rifle barrels. The TRG Action Wrench is a solid piece of Stressproof steel, cut into the same triangular shape as the TRG bolt. The wrench acts on the raceways of the action to minimize any torsional stress induced during barrel removal. Cut into one end of the wrench is an interface for a six sided ¾” or 19mm socket wrench. Note: TRG barrels are screwed on extremely tight.
259.9 259.9 1 EUR
N. prodotto: 100033848
KINETIC RESEARCH GROUP SAKO TRG ACTION WRENTCH
Parti Fabbricante: AXN-WRN La chiave per azione TRG facilita la rimozione del canna per i fucili Sako TRG-22/42. Ora puoi trasformare il tuo TRG in un fucile \
259.9 EUR 0 259,90 € *
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche: Adatto per: Sako Modello: TRG-22, TRG-42

Caratteristiche

Adatto per: Sako Modello: TRG-22,TRG-42 Peso della spedizione: 0,558kg Altezza di spedizione: 76mm Larghezza di spedizione: 51mm Lunghezza di spedizione: 343mm

Dettagli dell'elemento

Made in Usa

Operatore economico responsabile secondo il regolamento UE

Brownells
Via Mezzavilla 4
25043 Breno
Italia
service@brownells.it




Scopri la chiave TRG per Sako TRG-22/42 🔧, ideale per rimuovere la canna e migliorare le tue prestazioni di tiro!

The First Wrench of Its Kind
The TRG Action Wrench facilitates barrel removal for the Sako TRG-22/42 rifles. Now you can turn your TRG into a “switch-barrel” rifle with this wrench and a barrel vise. Gunsmiths can use this for barrel replacements and avoid fabricating their own wrench. This is one of the first and only action wrench available for the TRG rifles. It is intended to be used by those qualified to remove and install rifle barrels. The TRG Action Wrench is a solid piece of Stressproof steel, cut into the same triangular shape as the TRG bolt. The wrench acts on the raceways of the action to minimize any torsional stress induced during barrel removal. Cut into one end of the wrench is an interface for a six sided ¾” or 19mm socket wrench. Note: TRG barrels are screwed on extremely tight.
Torna all'inizio