Il Carrello è vuoto.

Carrello

Aiuto e contatti

Reso facile

Newsletter

Offerte

Oltre 300.000 clienti - vi ringraziamo!

4,93/5 "Molto buono" (1400+ recensioni)

Oltre 40.000 prodotti per caccia e sport di tiro

YANKEE HILL MACHINE CO., INC.
PICATINNY BIPOD ADAPTER

100002072

Rock Solid Platform For Bipod Attachment

Lightweight, slimline design eliminates the clunky extra baggage look that goes along with trying to mate a bipod to a AR-15/M16 handguard. The rugged, aluminum platform with fixed attachment stud provides a superior fit to Weaver or Picatinny, accessory rails. Two hex-head crossbolts give uniform clamping pressure, so adapter remains rock solid while shooting. Specifically contoured to accept Harris and similar bipods that attach to a swivel stud.

SPECS: Aircraft-grade aluminum, hardcoat anodized, matte black finish. 2-5/8" (6.7cm) long, 1¼" (3.2cm) wide, 5/8" (1.6cm) high. 2.2 oz. (62g) wt.

Altro...

Piattaforma Estremamente Stabile per l'Attacco del Bipiede

Design leggero e slim che elimina l'aspetto ingombrante e superfluo che si verifica cercando di accoppiare un bipiede a un handguard AR-15/M16. La robusta piattaforma in alluminio con perno di fissaggio fisso offre un adattamento superiore alle rotaie accessorie Weaver o Picatinny. Due bulloni a testa esagonale forniscono una pressione di serraggio uniforme, così l'adattatore rimane estremamente stabile durante lo sparo. Specificamente sagomato per accettare bipiedi Harris e simili che si attaccano a uno swivel stud.

SPECIFICHE: Alluminio di grado aeronautico, anodizzato hardcoat, finitura opaca nera. Lunghezza 2-5/8" (6.7cm), larghezza 1¼" (3.2cm), altezza 5/8" (1.6cm). Peso 2.2 oz. (62g).

Altro...

Punteggi dei clienti per YANKEE HILL MACHINE CO., INC. PICATINNY BIPOD ADAPTER

Numero di punteggi: 7
Da brownells.com: 7
Punteggio medio: 3,4

Bipod mount/ sling mount (09/11/2009)

Very solid steel mount that has double cross bars.
Heavier than others and takes up more space.

Yankee Hill Bipod Adapter (08/04/2010)

I use this to hold my Harris bipod to my M&P 15-22. This is a once piece clamping design that I was not able to loosen enough to slide the adapter onto the rail from the side so one has to slip it on from the end. This is its only limitation. It is well made, clamps tightly, works well in holding my Harris bipod solidly to the forerail and is of good quality manufacturing. It has two screw tighening which was important to me. I did not feel one screw was enough.

Not on just any rail (16/02/2011)

I like the idea of the product. Its solid if it can go on. I put it on a cheap plastic rail. I finally got around to free floating my AR with a YHM free float rail, yeah it does fit on its own rail products. It is possible putting it on the cheap rail cinch it down making it impossible to install on the aluminum one later, but I doubt it.

The perfect match for Harris bipod (04/10/2011)

The YHM bipod adapter is perfectly tailored for the Harris bipod. The swivel stud that connects to the bipod is precisely located to center the base of the bipod when installed. Similar accessories has their stud located at the center of the adapter offsetting the position of the bipod when installed. This is a minor flaw and in no way affects the operation of the bipod. It does however affects the overall aesthetics. It goes to show that YHM did their homework when they designed this gadget. Great job, great price. Higly recommended. A QD version will be a great addition to this line up.

I WOULD BUY THIS UNIT AGAIN. (08/01/2012)

UNIT IS EXACTLY AS STATED, A BREEZE TO INSTALL AND THE MENTIONED OFF SET FIT PERFECTLY ON MY ARMALITE .308

Did Not Fit My Picatinny Rail (04/04/2012)

This is a solidly made adapter milled out of a single piece of aluminum. It does not have a separate clamping bar, but appears to depend on a cut halfway through the adapter to give some "spring" to one side. However, it can't really be spread apart. It can not be installed by rotating it from the side over the rail, and it was too narrow to slide onto my rail from the end.

I am returning this product for another after I talk to a Brownell's technician.

TIGHT FIT (10/01/2015)

some rails this slides right on. the last rail I put it on had to use a plastic mallet to send it home. I don't have a problem doing this. I rather have it on the tight side than be loose.

Leggi più recensioni su brownells.com

0 0 1 EUR

N. prodotto: 100002072
YANKEE HILL MACHINE CO., INC. PICATINNY BIPOD ADAPTER
Parti Fabbricante: YHM-638 Design leggero e slim che elimina l'aspetto ingombrante e superfluo che si verifica cercando di accoppiare un bipiede a un handguard AR-15/M16. La robusta piattaforma in alluminio con perno di fissaggio fisso offre un adattamento superiore alle rotaie accessorie Weaver o Picatinny. Due bulloni a testa esagonale forniscono una pressione di serraggio uniforme, così l'adattatore rimane estremamente stabile durante lo sparo. Specificamente sagomato per accettare bipiedi Harris e simili che si attaccano a uno swivel stud.

Avvisa quando diventa disponibile

Non disponibile.

Caratteristiche: Applicazioni: Swivel Stud Mount Attachment: Picatinny

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Top takeaways

Design leggero e slim elimina l'aspetto ingombrante su handguard AR-15/M16, con piattaforma in alluminio robusta e perno fisso.
Due bulloni a testa esagonale assicurano una pressione di serraggio uniforme, mantenendo l'adattatore stabile durante lo sparo.
Compatibile con bipiedi Harris e simili che si attaccano a uno swivel stud, con specifiche in alluminio aeronautico anodizzato hardcoat.

Caratteristiche

Applicazione: Swivel Stud Mount Attachment: Picatinny Peso della spedizione: 0,068kg Altezza di spedizione: 13mm Larghezza di spedizione: 25mm Lunghezza di spedizione: 86mm

Dettagli dell'elemento

Made in Usa

Operatore economico responsabile secondo il regolamento UE

Brownells
Via Mezzavilla 4
25043 Breno
Italia
service@brownells.it

Scopri l'adattatore bipiede Picatinny di Yankee Hill! 🛠️ Leggero, stabile e perfetto per bipiedi Harris. Ottimizza il tuo AR-15/M16!

Rock Solid Platform For Bipod Attachment

SPECS: Aircraft-grade aluminum, hardcoat anodized, matte black finish. 2-5/8" (6.7cm) long, 1¼" (3.2cm) wide, 5/8" (1.6cm) high. 2.2 oz. (62g) wt.

Altro...

Piattaforma Estremamente Stabile per l'Attacco del Bipiede

SPECIFICHE: Alluminio di grado aeronautico, anodizzato hardcoat, finitura opaca nera. Lunghezza 2-5/8" (6.7cm), larghezza 1¼" (3.2cm), altezza 5/8" (1.6cm). Peso 2.2 oz. (62g).

Altro...

Punteggi dei clienti per YANKEE HILL MACHINE CO., INC. PICATINNY BIPOD ADAPTER

Numero di punteggi: 7
Da brownells.com: 7
Punteggio medio: 3,4

Bipod mount/ sling mount (09/11/2009)

Very solid steel mount that has double cross bars.
Heavier than others and takes up more space.

Yankee Hill Bipod Adapter (08/04/2010)

Not on just any rail (16/02/2011)

The perfect match for Harris bipod (04/10/2011)

I WOULD BUY THIS UNIT AGAIN. (08/01/2012)

UNIT IS EXACTLY AS STATED, A BREEZE TO INSTALL AND THE MENTIONED OFF SET FIT PERFECTLY ON MY ARMALITE .308

Did Not Fit My Picatinny Rail (04/04/2012)

TIGHT FIT (10/01/2015)

some rails this slides right on. the last rail I put it on had to use a plastic mallet to send it home. I don't have a problem doing this. I rather have it on the tight side than be loose.

Leggi più recensioni su brownells.com