Il Carrello è vuoto.

Carrello

Aiuto e contatti

Reso facile

Newsletter

Offerte

Oltre 300.000 clienti - vi ringraziamo!

4,93/5 "Molto buono" (1400+ recensioni)

Oltre 40.000 prodotti per caccia e sport di tiro

HAVLIN
MOSSBERG .22 RIMFIRE M22 SUPER SIDE SCOPE MOUNT

100001258

Update Your Vintage Rimfire With Optics Of Choice

Weaver-style rail conforms to receiver curvature and attaches to existing mounting holes, centering any diameter scope directly over the barrel. Lets you mount full-size scopes and red-dot optics. Provides enough clearance to keep original rear sights in place. Easy installation: remove bolt cover, if present, to allow bolt to clear mount; add rings and scope of choice.

SPECS: Aluminum, black anodized finish. Rail measures 4-7/16" (11.3cm) long, 9/16" (1.4cm) high. Fits following models with side-tapped receiver: 26B, 26C, 42A, 42B, 42C, 42M (all variants), 43, 44B, 44US (all variants), 46A, 46B (all variants), 46M (all variants), and most Wards-Westernfield rifles (made by Mossberg) with side-tapped holes measuring 1-5/8" (4.1cm) center-to-center.

Altro...

Aggiorna il Tuo Rimfire Vintage con Ottiche a Scelta

La rotaia in stile Weaver si adatta alla curvatura del ricevitore e si attacca agli fori di montaggio esistenti, centrando qualunque mirino di diametro direttamente sopra la canna. Ti permette di montare mirini di dimensioni standard e ottiche red-dot. Fornisce abbastanza spazio per mantenere in posizione i mirini posteriori originali. Installazione facile: rimuovere il copri otturatore, se presente, per permettere all'otturatore di sganciarsi dal montaggio; aggiungere anelli e mirino a scelta.

SPECIFICHE: Alluminio, finitura anodizzata nera. La rotaia misura 4-7/16" (11.3cm) di lunghezza, 9/16" (1.4cm) di altezza. Adatto ai seguenti modelli con ricevitore filettato lateralmente: 26B, 26C, 42A, 42B, 42C, 42M (tutte le varianti), 43, 44B, 44US (tutte le varianti), 46A, 46B (tutte le varianti), 46M (tutte le varianti), e la maggior parte dei fucili Wards-Westernfield (prodotti da Mossberg) con fori filettati lateralmente che misurano 1-5/8" (4.1cm) da centro a centro.

Altro...

Punteggi dei clienti per HAVLIN M22 SCOPE MOUNT

Numero di punteggi: 11
Da brownells.com: 11
Punteggio medio: 5

great product (29/10/2009)

this mount was a direct replacement product was exactly as described

Good Product!!!! (19/11/2009)

This mount fit perfectly on the Mossberg 44US, the holes on the Mossberg were pre-drilled so it was installed in a matter of minutes. Installing a scope with this mount was very simple. The product is manufactured well and does NOT feel cheap.

Good product (29/05/2011)

Does exactly what it's supposed to do at a good price.

Easy to install (02/02/2012)

This worked perfectly, and installed in about 2 minutes. Make sure you have Weaver style scope rings for proper mounting to the rail. Couldn't be happier!

Solid and Well made (06/06/2012)

Fitted to my mossberg 45A perfectly even tho it is not listed only had to remove a grub screw

Jum

Great Product (10/06/2012)

Bought this for a Stevens mdl 87 (branded Western Field).
This piece bolted right on, using factory drilled and tapped holes. It fit perfect and is very stout. I am very happy with it!!

I would buy this product again and again (08/07/2012)

Bought this mount for a Wards/Mossberg Model 41 22. Mounted a BSA Sweet 22 scope and sighted it in at the range. Proceeded to knock chickens down at 200 yards. What a rifle. Couldn't have done it without your mount. Thanks

Havlin M22 scope mount on old Savage 6A (04/12/2014)

I bought an old pre-war Savage 6A about two months ago at a local gun show(always was kind of interested in the old "gill guns" ;-) ) that was drilled with scope mounting screws that were approximately 1-5/8" apart. Not knowing much about the scope mounts that fit this type of rifle, I first bought an old Weaver N2 mount for it off of GunBroker (I read somewhere on line that this was the type of scope mount that was most often used on these types of guns). Well, the N2's scope mounting holes weren't even close to fitting. I saw this mount (Havlin M22) while looking for something else on the Brownell's website, and the fact that it had the screw mounting holes 1-5/8" apart and basically appeared to be similar to the old Weaver N series of scope mounts intrigued me. This mount fit perfectly! I'm even also quite surprised that the two hex head mounting screws that came with it fit without having to be modified somehow (I read sometimes that the hex head mounting screws that come with the Weaver have to be dremeled shorter to fit). So if you have an old Savage 6A .22 laying around that you want to scope and it has scope mounting holes 1-5/8" apart on it, I would seriously think about giving this mount a try!

Wards Western Field 47C (04/10/2015)

Fit my father's old Wards Western Field 47C perfectly. Two screws and a couple of minutes and it was on like a glove.

Mounted on 46m mossberg 22 rifle (13/12/2017)

Works good . You can't go wrong. Fast shipping. Thanks JIM.

Fits Mossberg Model 42 vintage 1935 (11/07/2018)

Brings an old gun to life. The old school iron sights were beat to death on this old truck gun. Needed to scope it and this bolted right on with no problem.

Leggi più recensioni su brownells.com

69.9 69.9 1 EUR

N. prodotto: 100001258
HAVLIN M22 SCOPE MOUNT
Parti Fabbricante: NONE La rotaia in stile Weaver si adatta alla curvatura del ricevitore e si attacca agli fori di montaggio esistenti, centrando qualunque mirino di diametro direttamente sopra la canna. Ti permette di montare mirini di dimensioni standard e ottiche red-dot. Fornisce abbastanza spazio per mantenere in posizione i mirini posteriori originali. Installazione facile: rimuovere il copri otturatore, se presente, per permettere all'otturatore di sganciarsi dal montaggio; aggiungere anelli e mirino a scelta.

69.9 EUR 11 69,90 € *

Tempi di consegna circa 12-16 giorni.
Più di 10 pz. nel magazzino USA

Caratteristiche: Adatto per: Mossberg Colore: Nero Opaco Materiale: Alluminio Modello: Universal Rifles, Universal Numero di basi: 1 pezzo Tipo: Weaver

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Top takeaways

La rotaia in stile Weaver si adatta alla curvatura del ricevitore e permette di montare mirini standard e ottiche red-dot.
Installazione facile: rimuovere il copri otturatore e aggiungere anelli e mirino a scelta.
Adatto ai modelli Mossberg con ricevitore filettato lateralmente, inclusi vari modelli della serie 26, 42, 43, 44, 46 e Wards-Westernfield.

Caratteristiche

Adatto per: Mossberg Colore: Nero Opaco Materiale: Alluminio Modello: Universal,Universal Rifles Numero di basi: 1 pezzo Tipo: Weaver Peso della spedizione: 0,068kg Altezza di spedizione: 3mm Larghezza di spedizione: 107mm Lunghezza di spedizione: 173mm

Dettagli dell'elemento

Made in Usa

Operatore economico responsabile secondo il regolamento UE

Brownells
Via Mezzavilla 4
25043 Breno
Italia
service@brownells.it

Scopri il MOSSBERG .22 RIMFIRE M22 Super Side Scope Mount! 🛠️ Facile da installare, compatibile con vari modelli Mossberg e ottiche standard.

Update Your Vintage Rimfire With Optics Of Choice

Altro...

Aggiorna il Tuo Rimfire Vintage con Ottiche a Scelta

Altro...

Punteggi dei clienti per HAVLIN M22 SCOPE MOUNT

Numero di punteggi: 11
Da brownells.com: 11
Punteggio medio: 5

great product (29/10/2009)

this mount was a direct replacement product was exactly as described

Good Product!!!! (19/11/2009)

Good product (29/05/2011)

Does exactly what it's supposed to do at a good price.

Easy to install (02/02/2012)

This worked perfectly, and installed in about 2 minutes. Make sure you have Weaver style scope rings for proper mounting to the rail. Couldn't be happier!

Solid and Well made (06/06/2012)

Fitted to my mossberg 45A perfectly even tho it is not listed only had to remove a grub screw

Jum

Great Product (10/06/2012)

Bought this for a Stevens mdl 87 (branded Western Field).
This piece bolted right on, using factory drilled and tapped holes. It fit perfect and is very stout. I am very happy with it!!

I would buy this product again and again (08/07/2012)

Havlin M22 scope mount on old Savage 6A (04/12/2014)

Wards Western Field 47C (04/10/2015)

Fit my father's old Wards Western Field 47C perfectly. Two screws and a couple of minutes and it was on like a glove.

Mounted on 46m mossberg 22 rifle (13/12/2017)

Works good . You can't go wrong. Fast shipping. Thanks JIM.

Fits Mossberg Model 42 vintage 1935 (11/07/2018)

Brings an old gun to life. The old school iron sights were beat to death on this old truck gun. Needed to scope it and this bolted right on with no problem.

Leggi più recensioni su brownells.com