Il Carrello è vuoto.

Carrello

Aiuto e contatti

Reso facile

Newsletter

Offerte

Oltre 300.000 clienti - vi ringraziamo!

4,93/5 "Molto buono" (1400+ recensioni)

Oltre 40.000 prodotti per caccia e sport di tiro

ROCK RIVER ARMS
AR-15/M16 NM FREE FLOAT BARREL SLEEVE

739000003

DCM Legal, A2-Style Relieves Barrel Tension For Better Accuracy

Two-piece steel tube isolates barrel from forend pressure for consistent accuracy on target and tactical rifles. Lets you use a tight shooting sling or a bipod without putting external pressure on barrel and shifting point of impact. Furnished with A2 handguards, sling swivel and gas tube. DCM legal, does not alter exterior profile.

SPECS: Steel, parkerized finish. High-temp injection-molded handguards, black. 13" (33cm) long. 16 oz. (454 g) weight. Fits AR-15 with 20" barrel.

Altro...

Conforme DCM, Stile A2 Riduce la Tensione della Canna per una Maggiore Precisione

Tubo in acciaio a due pezzi che isola la canna dalla pressione dell'astina per garantire una precisione costante su fucili da tiro e tattici. Permette l'uso di una cinghia di tiro stretta o di un bipiede senza esercitare pressione esterna sulla canna e modificare il punto di impatto. Fornito con impugnature A2, anello per cinghia e tubo del gas. Conforme alle normative DCM, non altera il profilo esterno.

SPECIFICHE: Acciaio, finitura parkerizzata. Impugnature ad iniezione ad alta temperatura, nere. Lunghezza 13" (33cm). Peso 16 oz. (454 g). Adatto per AR-15 con canna da 20".

Altro...

Punteggi dei clienti per ROCK RIVER ARMS FREE FLOAT BARREL SLEEVE

Numero di punteggi: 7
Da brownells.com: 7
Punteggio medio: 4,6

Good, Solid Product (17/08/2009)

I just finished a DCM style build using this tube / handguard. The unit is solid and well made with clean threads and a precise fit. It does not come with Delta Ring, Weld Spring or Snap ring. Beware of using the proper loctite as I used the wrong stuff and almost had a misaligned tube that I could not break loose. Fortunately I have access to a good shop with a pipe vise and got it broke lose with no damage. You will have to cut the sling swivel mounts off the standard front sight base and refinish the cut area. I would buy the unit again. I would not attempt to install it without the recommended tools, you will need a spanner wrench and barrel nut wrench that will clear the larger barrel nut.

Excellent product (09/01/2011)

I like the "stock" look of the AR-15 rails, but wanted a free floated tube for service rifle.

This product delivers.

very nice product (15/11/2011)

Ordered this on a Sunday and was at my door Wednesday, Brownells shipped fast ! The unit itself came well packaged and complete. I have no complaints at all. Much cheaper in price than other sellers.

Great Value! Great Product! (18/02/2013)

This free float sleeve is priced better than anywhere else on the web! Dont be fooled this should be named free float sleeve KIT! It is not super clear in the description but this is the whole package, The sling mount, barrel nut, float tube, lock washer, new hand guard (injection molded i believe) Gas tube, Everything you need to do the conversion! Brownells should make that clearer but I still love them. You'll need some tools to do this #1 ACTION BLOCK! dont try to do this without the receiver PROPERLY secured. You need an armorers wrench, snap ring pliers for disassembling the delta ring, 1/16 and 1/8 punches, some loctite, and some Teflon based grease. Some guns will require that you grind off the old sling mount to make room for the new one, so you may want some form of touchup for that. Overall a pretty simple job, took me about an hour (with the right tools.)

Very nice kit. (05/03/2014)

Purchased this for an older Bushmaster AR-15 with a 20" heavy barrel. Had a local gunsmith install it. Looks good and he said it was the nicest free float kit for ARs that he has seen in 30 years of working on them. Looking forward to shooting it this coming weekend. If it shoots as good as it looks, I would highly recommend it.

Barrel nut wrench (13/06/2014)

I bought the Yankee Hill wrench. The hole through the middle of the wrench does not fit over the nut. The wrench needs to be opened up a bit. I called Rock River and they confirmed this. Expect to modify your wrench.

Another Satisfied Customer (03/08/2014)

I bought one of these kits to use with a 22" bull barrel. I'm not a fan of free-float tubes or quad-rail setups, so I got this kit instead.

Unfortunately, the sling swivel interfered with the gas block. But as mentioned above, I'm using a bull barrel. Plus I'm using an aftermarket (not A2 style) gas block. So I removed the sling swivel, and installed one in the handguards.

Also, my mil-spec barrel nut wrench did not fit over the barrel nut. However, I found that the DPMS multi-tool (part number 231-000-007WB) fits both the barrel nut and the lock ring.

All things considered, I'm happy to have a 'normal' looking AR-15 with a free-floated barrel.

Leggi più recensioni su brownells.com

234.9 234.9 1 EUR

N. prodotto: 739000003
ROCK RIVER ARMS FREE FLOAT BARREL SLEEVE
Parti Fabbricante: AR0127BRWNL Tubo in acciaio a due pezzi che isola la canna dalla pressione dell'astina per garantire una precisione costante su fucili da tiro e tattici. Permette l'uso di una cinghia di tiro stretta o di un bipiede senza esercitare pressione esterna sulla canna e modificare il punto di impatto. Fornito con impugnature A2, anello per cinghia e tubo del gas. Conforme alle normative DCM, non altera il profilo esterno.

234.9 EUR 0 234,90 € *

In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.

Caratteristiche: Adatto per: AR-15 Colore: Nero Lunghezza: 13'' Materiale: Polymer Tipo: Flottante, 2-pezzi

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Top takeaways

Tubo in acciaio a due pezzi che isola la canna dalla pressione dell'astina, garantendo una precisione costante.
Permette l'uso di una cinghia di tiro stretta o di un bipiede senza esercitare pressione esterna sulla canna.
Fornito con impugnature A2, anello per cinghia e tubo del gas, conforme alle normative DCM.

Caratteristiche

Adatto per: AR-15 Colore: Nero Lunghezza: 13'' Materiale: Polymer Tipo: Flottante,2-pezzi Peso della spedizione: 1,043kg Altezza di spedizione: 69mm Larghezza di spedizione: 69mm Lunghezza di spedizione: 389mm

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.y.1

Scopri il tubo FREE FLOAT BARREL SLEEVE per AR-15 di Rock River Arms. 🎯 Garantisce precisione e stabilità per i tuoi fucili da tiro!

DCM Legal, A2-Style Relieves Barrel Tension For Better Accuracy

SPECS: Steel, parkerized finish. High-temp injection-molded handguards, black. 13" (33cm) long. 16 oz. (454 g) weight. Fits AR-15 with 20" barrel.

Altro...

Conforme DCM, Stile A2 Riduce la Tensione della Canna per una Maggiore Precisione

SPECIFICHE: Acciaio, finitura parkerizzata. Impugnature ad iniezione ad alta temperatura, nere. Lunghezza 13" (33cm). Peso 16 oz. (454 g). Adatto per AR-15 con canna da 20".

Altro...

Punteggi dei clienti per ROCK RIVER ARMS FREE FLOAT BARREL SLEEVE

Numero di punteggi: 7
Da brownells.com: 7
Punteggio medio: 4,6

Good, Solid Product (17/08/2009)

Excellent product (09/01/2011)

I like the "stock" look of the AR-15 rails, but wanted a free floated tube for service rifle.

This product delivers.

very nice product (15/11/2011)

Ordered this on a Sunday and was at my door Wednesday, Brownells shipped fast ! The unit itself came well packaged and complete. I have no complaints at all. Much cheaper in price than other sellers.

Great Value! Great Product! (18/02/2013)