Il Carrello è vuoto.

Carrello

Aiuto e contatti

Reso facile

Newsletter

Offerte

Oltre 300.000 clienti - vi ringraziamo!

4,93/5 "Molto buono" (1400+ recensioni)

Oltre 40.000 prodotti per caccia e sport di tiro

H-S PRECISION
700 SHORT ACTION 308 DETACHABLE BOTTOM METALS

393000037

Add all the convenience of drop-free, box magazine to your favorite Remington 700 BDL. Spring-loaded finger latch inside the triggerguard drops the box magazine free, speeds loading and unloading. Made from durable stainless steel and finished with bake-on, matte, black Teflon® coating that's self-lubricating and resists scratches and wear. Updated version have positive locking springs on the bottom of both sides of the floor plate (holds the magazine box securely in place without the rubber o-ring), a polymer boot on bottom of box (easier to remove), and a guide slot and larger rear catch on back of box (ensures proper latch).

SPECS: Stainless steel, black, matte finish. 9.3 oz.(265 g) approximate wt. Fits H.S. Precision 2000 and Rem. 700 BDL long and short actions. Will fit Rem. ADL with modifications to stock. May require gunsmithing/fitting. Magazine Capacity – Five rounds with .223, .222 & .204, four rounds with standard calibers, ten rounds available for 308 and similar calibers, three or eight rounds with magnum calibers (8rd magazine holds 7 or 8, depending on cartridge).

Altro...

Aggiungi tutta la comodità di un caricatore a scatola sganciabile al tuo Remington 700 BDL preferito. La leva a molla all'interno del guardamonte permette di sganciare il caricatore facilmente, accelerando le operazioni di caricamento e scaricamento. Realizzato in acciaio inossidabile resistente e finito con una copertura in Teflon® nero opaco, cotto al forno, che è auto-lubrificante e resistente a graffi e usura. La versione aggiornata ha molle di bloccaggio positive sulla parte inferiore di entrambi i lati della piastra di fondo (mantiene il caricatore a scatola saldamente in posizione senza l'anello in gomma), un tappo in polimero sul fondo del caricatore (più facile da rimuovere), e uno slot guida e un arresto posteriore più grande sul retro del caricatore (assicura un corretto aggancio).

SPECIFICHE: Acciaio inossidabile, nero, finitura opaca. Peso approssimativo 9.3 oz.(265 g). Adatto per H.S. Precision 2000 e Rem. 700 BDL azioni lunghe e corte. Può essere adattato su Rem. ADL con modifiche alla calciatura. Potrebbe richiedere lavori di armaiolo/adattamento. Capacità del caricatore – Cinque colpi per .223, .222 & .204, quattro colpi per calibri standard, dieci colpi disponibili per 308 e calibri simili, tre o otto colpi per calibri magnum (il caricatore da 8rd contiene 7 o 8 colpi, a seconda del proiettile).

Altro...

Punteggi dei clienti per H-S PRECISION SHORT ACTION DETACHABLE MAGAZINE 308 10RD

Numero di punteggi: 8
Da brownells.com: 8
Punteggio medio: 3,8

Better than I expected! (28/12/2013)

This was listed as a drop in kit. But on my Remington 700 bdl, this was not the case. I needed to do a good deal of inletting and relief work to seat this kit properly. No modifying of the kit itself was needed. I used my dremmel tool and slow removal of material until I had a sound fit. Once the main body was seated there were gaps around the edges. I will be using Brownells stainless steel bedding kit to fill these gaps and insure nothing will move about. This kit allows flawless feeding of ammo to battery, and is of better quality than I had anticipated.

Just what I was hoping it would be. (21/05/2014)

I purchased this to upgrade my Remington 700 ADL to a Hogue BDL Stock + the Detachable Magazine. First is that with this Hogue stock I had to do some minor filing and fitting. It does not drop in. It is worth the work and not too hard, if you take your time. It is a great fit and improvement over firing one round at a time. Parts quality is the best I've seen. If you are the patient type you will not be disappointed.

Complete garbage (14/11/2014)

I have a H-S precision stock and this bolts in great and that's it. The rest of the product fails in historic proportions. The bullets don't feed at all. The last round never comes out of the magazine cleanly ever! I am extremely disappointed in this product especially for how much it costs and the "reputation" H-S precision has....

Also if you are a precision shooter and think your hand loads will fit. Think again. I had to the shorten the overal length to get the round to fit in the magazine itself. Again I would NEVER RECOMMEND this to anyone.

Works perfectly (12/05/2015)

I have this system with 5- and 10-round H-S magazines, fitted into the H-S Precision stock that comes from Remington as part of their Model 5R Milspec. While the system is not drop-in, it is *almost* drop-in. The only conflict is the internal latch that holds onto the magazine. When you release the latch moves outward and this conflicts with the stock crosspiece. I got out a riffler file and made a slim diagonal channel in the soft crosspiece material (no neet to touch the aluminum chassis underneath) and in 10 minutes I had a perfect drop-in fit. On my Manners T5A the same fitment is required, plus a slight enlargement of the rearmost portion of the mag well. Manners will perform this themselves at no cost on a BDL-inlet stock if you ask them at time of purchase.

As to functionality, it is perfect. If your rounds don't fit this magazine then they don't fit any magazine. then they must not conform to 7.62 NATO specs. I have run several types of ammo plus handloads with an OALT of 2.793" and they fit fine. 145gr commercial ammo has a bunch of extra room. 175gr commercial match ammo not so much, but it fits.

Very good product (09/04/2016)

Was very easy to install. Took about 30 mins. Small file and a little time. Fits perfectly. Loads perfectly. Well worth the little time and money.

Box magazine conversion #1 upgrade !! (29/07/2013)

Generation 2 of this product is vastly superior to the original. Less noise, more positive lock, and polymer boot to prevent damage when dropped. Easy to install, no fitting necessary.

Requires Gunsmithing (30/09/2013)

This part required a gunsmith to install on a Remington PSS with the H-S precision stock. Had to opened up with a mill.

The mags will not retain and feed rounds reliably without being tuned. The lips are far too wide apart and are flat, as opposed to curved, which would feed better.

The AI variants are much better products and better quality as well.

Great looking product! (12/08/2015)

Did my homework and selected this product for my Rem 700 Sendero based on reviews. When I installed it my first problem was the front action screw now intruded into the action and prevented the bolt from closing. The second issue was the back of the magazine made contact with the lower back bridge of the action and therefore was difficult to install and wouldn't drop from the action when the release was pressed. I installed a .012 shim to correct the problem but then had a problem feeding the last round, (yep, all it takes it .012 to jack it up). I almost sent it back but decided to try removing .015 from the front action screw. The bolt can now close and after testing over three ten round mags I can say it feeds correctly. In defense of HS Precision I seem to always have weird problems when buying and installing stuff like this. I would give it five stars if instructions addressing how to resolve potential problems had been included. I expect it to work as advertised and will repost if I have any major failures. I like that it's a double stack mag and think it's the best looking of all the DBM's on the market.

Leggi più recensioni su brownells.com

689.9 689.9 2 EUR

N. prodotto: 393000037
H-S PRECISION SHORT ACTION DETACHABLE MAGAZINE 308 10RD
Parti Fabbricante: AP307 Aggiungi tutta la comodità di un caricatore a scatola sganciabile al tuo Remington 700 BDL preferito. La leva a molla all'interno del guardamonte permette di sganciare il caricatore facilmente, accelerando le operazioni di caricamento e scaricamento. Realizzato in acciaio inossidabile resistente e finito con una copertura in Teflon® nero opaco, cotto al forno, che è auto-lubrificante e resistente a graffi e usura. La versione aggiornata ha molle di bloccaggio positive sulla parte inferiore di entrambi i lati della piastra di fondo (mantiene il caricatore a scatola saldamente in posizione senza l'anello in gomma), un tappo in polimero sul fondo del caricatore (più facile da rimuovere), e uno slot guida e un arresto posteriore più grande sul retro del caricatore (assicura un corretto aggancio).

689.9 EUR 4 689,90 € *

Tempi di consegna circa 12-16 giorni.
4 pz. nel magazzino USA

Caratteristiche: Adatto per: Remington Finitura: Nero Modello: 700

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Top takeaways

Aggiunge la comodità di un caricatore a scatola sganciabile al Remington 700 BDL, con una leva a molla per un facile sgancio.
Realizzato in acciaio inossidabile con finitura in Teflon® nero opaco, auto-lubrificante e resistente a graffi e usura.
Capacità del caricatore: 10 colpi per 308 e calibri simili, con versioni per altri calibri disponibili.

Caratteristiche

Adatto per: Remington Finitura: Nero Modello: 700 Peso della spedizione: 0,204kg Altezza di spedizione: 33mm Larghezza di spedizione: 119mm Lunghezza di spedizione: 150mm

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.x

Operatore economico responsabile secondo il regolamento UE

Brownells
Via Mezzavilla 4
25043 Breno
Italia
service@brownells.it

N. prodotto: 393000031
H-S PRECISION SHORT ACTION MAGAZINE 308
Parti Fabbricante: AP305 Aggiungi tutta la comodità di un caricatore a scatola sganciabile al tuo Remington 700 BDL preferito. La leva a molla all'interno del guardamonte permette di sganciare il caricatore facilmente, accelerando le operazioni di caricamento e scaricamento. Realizzato in acciaio inossidabile resistente e finito con una copertura in Teflon® nero opaco, cotto al forno, che è auto-lubrificante e resistente a graffi e usura. La versione aggiornata ha molle di bloccaggio positive sulla parte inferiore di entrambi i lati della piastra di fondo (mantiene il caricatore a scatola saldamente in posizione senza l'anello in gomma), un tappo in polimero sul fondo del caricatore (più facile da rimuovere), e uno slot guida e un arresto posteriore più grande sul retro del caricatore (assicura un corretto aggancio).

689.9 EUR 1 689,90 € *

Tempi di consegna circa 12-16 giorni.
1 pz. nel magazzino USA

Caratteristiche: Adatto per: Remington Finitura: Nero Modello: 700

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Scopri il caricatore sganciabile H-S Precision per Remington 700! 🔥 Acciaio inox, design pratico e capacità di 10 colpi per .308.

Altro...

Punteggi dei clienti per H-S PRECISION SHORT ACTION DETACHABLE MAGAZINE 308 10RD

Numero di punteggi: 8
Da brownells.com: 8
Punteggio medio: 3,8

Better than I expected! (28/12/2013)

Just what I was hoping it would be. (21/05/2014)

Complete garbage (14/11/2014)

Works perfectly (12/05/2015)

Very good product (09/04/2016)

Was very easy to install. Took about 30 mins. Small file and a little time. Fits perfectly. Loads perfectly. Well worth the little time and money.

Box magazine conversion #1 upgrade !! (29/07/2013)

Generation 2 of this product is vastly superior to the original. Less noise, more positive lock, and polymer boot to prevent damage when dropped. Easy to install, no fitting necessary.

Requires Gunsmithing (30/09/2013)