Il Carrello è vuoto.

Carrello

Aiuto e contatti

Reso facile

Newsletter

Offerte

Oltre 300.000 clienti - vi ringraziamo!

4,93/5 "Molto buono" (1400+ recensioni)

Oltre 40.000 prodotti per caccia e sport di tiro

10-8 PERFORMANCE
1911 FLAT TRIGGER

100003159

Delivers Consistent Length-Of-Pull Regardless Of Finger Placement

Lightweight, aluminum trigger shoe features a flat, serrated face for uniform length-of-pull regardless of index finger placement. Full width, stainless steel bow eliminates flex and is permanently staked to the shoe for added strength, making this trigger a top choice for duty and self defense guns. Stainless steel overtravel stop screw is mounted in the rear of the shoe and requires no staking or threadlocker to keep it in place once it s set, it won t shoot loose.

SPECS: Bow - Stainless steel, polished finish. Shoe - Aluminum, silver, anodized finish. 2.2 (5.6cm) OAL. .3 oz. (8.6g) wt.

Altro...

Garantisce una Lunghezza di Trazione Coerente Indipendentemente dalla Posizione del Dito

Grilletto leggero in alluminio con scarpa piatta e zigrinata per garantire una lunghezza di trazione uniforme, indipendentemente dalla posizione del dito indice. L'arco in acciaio inossidabile a piena larghezza elimina la flessibilità ed è permanentemente fissato alla scarpa per una maggiore resistenza, rendendo questo grilletto una scelta eccellente per pistole da servizio e difesa personale. La vite di arresto del sovraccorso in acciaio inossidabile è montata nella parte posteriore della scarpa e non necessita di ribattini o frenafiletti per rimanere in posizione una volta impostata, non si allenterà con gli spari.

SPECIFICHE: Arco - Acciaio inossidabile, finitura lucida. Scarpa - Alluminio, argento, finitura anodizzata. Lunghezza totale 2.2 (5.6cm). Peso 0.3 oz. (8.6g).

Altro...

Punteggi dei clienti per 10-8 PERFORMANCE 10-8 FLAT TRIGGER

Numero di punteggi: 12
Da brownells.com: 12
Punteggio medio: 4,2

Excellent part (14/10/2009)

I thought these were quite ugly...until I used one. Now it is a thing of beauty! No matter where your finger falls on the trigger it feels exactly the same. It is not at all uncomfortable like I imagined it might be. The quality of the 10-8 trigger is top notch. The set screw cannot back out so once it is set you can forget about it. Excellent part. If you have never tried a flat trigger I encourage you to give it a shot.

Awesome! (23/01/2010)

I have this trigger on an old Colt GM. For 17 years I had an extra short trigger on it and loved it.

Then on a whim I switched the trigger to the flat 10-8. I was amazed at how quickly I came to appreciate it. Same finger position every time, and feels comfortable even with my "Burger King" hands.
I was able to fit this trigger myself with the instructions provided.

Interesting trigger, mixed thoughts. (01/04/2011)

This trigger required quite a lot of fitting. The shoe was very easy to fit, but the bow is oversized. It extends into the back of the frame a bit longer than it should, eliminating needed pretravel. A stoning of the sear legs where they contact the disconnector will give you the correct amount of pretravel. The fixed overtravel stop is a nice feature as well. The look and feel is rather unconventional, but they are certainly worth a try.

Not Bad (20/12/2011)

This trigger is super light, but has a bit of horizontal/vertical movement when installed. I put it in a Para GI expert, and it required no fitting. it just dropped in, with room to spare. Functional for carry but don't use for a competion gun.

Will use again. (26/12/2011)

Minor fitting. Looks good.

My favorite trigger (13/02/2012)

Have used this on 2 different 1911s, just a touch of fitting but is easily done, try one and you'll probably never use another trigger again

Great Trigger (01/09/2012)

Just installed this Trigger into my Sig Target 1911. The installation was easy and required little effort to properly fit (super easy). I really like the way that the flat trigger feels and functions.

Great design...Execution OK (31/12/2012)

This part is designed extremely well and has more trick custom details than any other trigger right out of the box (relief cuts on pad and bow, rock-solid shoe attachment, secure blind overtravel). Unfortunately, due to apparent variance in manufacturing tolerances (bow dimensions), this part required quite a bit of fitting in order to get satisfactory function in a Colt frame (which I arrogantly feel should be the blueprint for all 1911 parts).

Easy to install, good value, effective. (01/11/2013)

I have been looking at this trigger for a very long time. It was purchased to replace the plastic trigger of a RIA 1911A1-FS. After watching Brownells Web-Bench (repeatedly) I got this installed and tested it out at the range, it was incredible. I am highly impressed with the product and as always Brownells got me the part within a few days. It wasn't very difficult to install and I only needed basic tools to get it done. Thanks 10-8 and Brownells!

Worthless (27/02/2016)

Trigger bow WAY too long - Unusable

Recommend (01/07/2016)

Works and feels great. Dropped one in a RIA government, no fitting required. Second one in a RIA officer's model. Worked excellent after slowly filing the overtravel screw. Slowly, did two iterations of assemble/dis to get it right. Now perfect, tremendous feel, highly recommend.

Fantastic (27/06/2017)

The negative reviews on this are clearly from people that have never worked on a 1911 before. This trigger, like all quality 1911 triggers, requires hand fitting. This is not a drop in part... heck you wouldn't want a drop in trigger, this is a 1911 it's supposed to be hand fitted! That means shaving the top and bottom of the trigger with a stone and sandpaper for an hour or so to get things perfect and bending the bow to fit your gun. Once everything is set the trigger is perfect. This is definitely a "long" trigger so keep that in mind if you prefer the shot triggers. Love the way it feels and the aggressive/unique look.

Leggi più recensioni su brownells.com

0 0 1 EUR

N. prodotto: 100003159
10-8 PERFORMANCE 10-8 FLAT TRIGGER
Parti Fabbricante: TRIGGER02 Grilletto leggero in alluminio con scarpa piatta e zigrinata per garantire una lunghezza di trazione uniforme, indipendentemente dalla posizione del dito indice. L'arco in acciaio inossidabile a piena larghezza elimina la flessibilità ed è permanentemente fissato alla scarpa per una maggiore resistenza, rendendo questo grilletto una scelta eccellente per pistole da servizio e difesa personale. La vite di arresto del sovraccorso in acciaio inossidabile è montata nella parte posteriore della scarpa e non necessita di ribattini o frenafiletti per rimanere in posizione una volta impostata, non si allenterà con gli spari.

Avvisa quando diventa disponibile

Non disponibile.

Caratteristiche: Adatto per: 1911 Finitura: Acciaio inox Modello: Government, Commander, Officers Tipo: Solid, Flat

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Top takeaways

Grilletto leggero in alluminio con scarpa piatta e zigrinata per una trazione uniforme, adatto per pistole 1911 (Government, Commander, Officers).
Arco in acciaio inossidabile a piena larghezza per eliminare la flessibilità e aumentare la resistenza, ideale per pistole da servizio e difesa personale.
Vite di arresto del sovraccorso in acciaio inossidabile montata nella parte posteriore della scarpa, senza necessità di ribattini o frenafiletti.

Caratteristiche

Adatto per: 1911 Finitura: Acciaio inox Modello: Commander,Government,Officers Tipo: Flat,Solid Peso della spedizione: 0,005kg Altezza di spedizione: 10mm Larghezza di spedizione: 78mm Lunghezza di spedizione: 122mm

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.c

Operatore economico responsabile secondo il regolamento UE

Brownells
Via Mezzavilla 4
25043 Breno
Italia
service@brownells.it

Scopri il grilletto 1911 FLAT TRIGGER di 10-8 PERFORMANCE: leggero, resistente e perfetto per la tua pistola! ✨ Ottimizza la tua precisione.

Delivers Consistent Length-Of-Pull Regardless Of Finger Placement

SPECS: Bow - Stainless steel, polished finish. Shoe - Aluminum, silver, anodized finish. 2.2 (5.6cm) OAL. .3 oz. (8.6g) wt.

Altro...

Garantisce una Lunghezza di Trazione Coerente Indipendentemente dalla Posizione del Dito

SPECIFICHE: Arco - Acciaio inossidabile, finitura lucida. Scarpa - Alluminio, argento, finitura anodizzata. Lunghezza totale 2.2 (5.6cm). Peso 0.3 oz. (8.6g).

Altro...