Change Sight Colors Instantly; Great For Touch-Up Or Changing Colors To Match Conditions
High-pigment sight paints allow the iron sight shooter to add, change or touch-up sight colors in as little as 60 minutes. Greatly improves sight acquisition, shooter focus, and helps shooters tailor their sights for competition, hunting or self defense. Coating dries flexible to resist chipping and will not fade over time. Great for adding color to new gun sights and archery sight pins, or touching up worn, or chipped sights on all types of weapons. Easy-to-use needle applicator bottle puts the exact amount of paint right where you want it – no waste and no paint brush required. Shake bottle, apply and allow 1 hour to dry. One bottle paints a lifetime of sights.
Specs: ¼ oz. (7.4 ml) needle applicator bottle. Available in Red, White, Neon Green, Neon Yellow and Safety Orange.
Altro...
Cambia i Colori dei Mirini Istantaneamente; Ideale per Ritocchi o per Cambiare i Colori in Base alle Condizioni
Le vernici ad alta pigmentazione per mirini consentono agli sparatori di mirini in ferro di aggiungere, cambiare o ritoccare i colori dei mirini in soli 60 minuti. Migliorano notevolmente l'acquisizione del bersaglio, la concentrazione dello sparatore e aiutano a personalizzare i mirini per competizioni, caccia o difesa personale. Il rivestimento si asciuga flessibile per resistere alle scheggiature e non sbiadisce nel tempo. Ottimo per aggiungere colore ai nuovi mirini delle armi e ai perni di mira per l'arco, o per ritoccare mirini usurati o scheggiati su tutti i tipi di armi. La comoda bottiglia con applicatore ad ago consente di posizionare la quantità esatta di vernice esattamente dove si desidera - senza sprechi e senza bisogno di pennello. Agitare la bottiglia, applicare e lasciare asciugare per 1 ora. Un flacone vernicia una vita intera di mirini.
Specifiche: flacone con applicatore ad ago da ¼ oz. (7,4 ml). Disponibile nei colori Rosso, Bianco, Verde Neon, Giallo Neon e Arancione Sicurezza.
Altro...
Punteggi dei clienti per KG PRODUCTS SITE KOTE NEON YELLOW 1/4OZ
Numero di punteggi: 12
Da brownells.com: 12
Punteggio medio: 3,1
hard to see(26/12/2011)
i used this on my m&p 40 it made my sights harder to see than anything it did not adhere either it wiped off while doing a wipe down of the firearm
Somewhat Lacking...(18/04/2014)
Not understanding why this is listed under "New Products" ?
Bought the green a few years ago and while it adhered to the aftermarket steel front sight on a Glock 34 the "Neon" or even just a more visible color really was no better (actually not as good) as the white paint in Novak's front sights they've been offering for years ! Also, loaned the paint to a friend without predujusting him and he had similar results. Really too bad as Photoluminescent paint on tritium pistol sight seems all the rage recently !
kg site kote green(19/08/2013)
Don't waste your money,fades out when dry, even with multiple coats.
Works Great(27/02/2012)
Wasn't sure what to do about getting easier to see sights for my Berreta Model 96. Decided to use this stuff last night, it was easy to apply and looks great. It is very bright white and should be used against black to allow to pop nicely.
Very White(07/02/2016)
One of the dots on the rear Novak sight on my 1911 fell out. I really didnât want to replace the sight so I tried some of the sight paints I already had and I also bought one of the âsetsâ sold at Brownells, both the âglow in the darkâ and standard sight paint. All were difficult to apply and typically took 24 hours to dry. One even suggested to protect the paint by applying clear fingernail polish. The truth is none of them were bright enough to see well enough except in direct sunlight. Eventually I ended up removing all the dots and was ready to purchase new front and rear sights. Then I saw the Site Kote for a very reasonable price and thought it was worth a try. Sure glad I did!
Make sure the sight is very clean. I used Brake Clean first to make sure all oil and dirt was eliminated. Then used 99% pure isopropyl alcohol just to make sure. Shake the bottle well and let sit for a few minutes to let any bubbles come to the surface. The bottle comes with a metal applicator tip and is perfect for allowing a very small drop to be applied to the recessed dots on both the front a rear sights. This stuff dries quickly and I was shooting about an hour later. After about a 2 hour session and 150 rounds later the paint was still bright white and looked like the original Novak three dot sight system. The best features about this product is that it is bright white, stays put and is easy to apply. If youâre looking for paint to glow in the dark on night sights, this is the wrong product. If youâre looking to do some touching up or change to a new color, this is what you want. Even better if youâre an Edge member and donât have to pay shipping.
Great Product(08/03/2011)
I have used this on about every gun that has an older type steel sights, . I even used it on my 1942 P 08 Luger as it can be removed without a lot of trouble. This makes old gun sights easy to see for us that are over 50. As only the front sight is painted, it will probably paint 25 guns. The applicator is like a needle so there are no brush marks made. I have had some for 1+ years and it is still good (not dried up) but a "friend" did not return it so I am ordering more.
KG SITE KOTE(19/07/2012)
Finally a good consistent easy to apply sight paint that does not run and it tough. Can be removed or touched up if needed.
Jim
has a problem(15/08/2009)
It works great at first but the paint settles and hardens in the container very fast. Shaking it won't mix it up again.
Orange Site Kote(30/08/2009)
Was able to use on only 2 sights. It dried up like some one left the cap off but it was closed.
KG PRODUCTS KG SITE KOTE 1/4 OZ., ORANGE(08/09/2009)
This may as well be labeled a single use product. It dries up in the bottle and most is wasted.
Works Great So Far...(22/11/2010)
I bought this Bright Orange Site Kote Paint to put on the Front Sights of My Marlin 39A and Henry H001T Frontier.
This Stuff has worked great for me on these 2 guns. I got it about 3 month's ago,, so we'll see if it drie's out,, but so far,, it's good. It does take a lot of shakeing though to mix it up well before applying.
However It didn't take much prep for me. I just wiped the Front Site Bead with a Dry Cotton Patch and put the paint on.
The Needle Nose Applicator make's it really easy to pinpoint accuracy as well.
It did come off once while cleaning the 39A,, but I expected that. Just put some more back on,, and the great thing about this product,, is that it only take's an hour to dry.
I'll be putting this stuff on all my Rifle's Front Sight's.
I would have given it 5 Stars,, but haven't had it long enough to see if it dries out,, like the other's have said. However I make Sure that I put the Cap Back On ASAP, YMMV, Joe
Good Product if you use it right(03/12/2016)
This product is great for us older shooters, it is really bright !
Apply one drop at a time with sight level to the Site Coat, and then spread it around with a straight pin or a toothpick.
As for those who have said it drys out and will not mix when you shake it, if the shaker ball does move around , open the top of the bottle, use a small screwdriver to mix the paint a little, then the ball should be loose, and you can shake it, and hear the ball rattle.
My first bottle lasted several years, and did MANY sights.
N. prodotto: 665000016 KG PRODUCTS SITE KOTE NEON YELLOW 1/4OZ Parti Fabbricante: D1105 Le vernici ad alta pigmentazione per mirini consentono agli sparatori di mirini in ferro di aggiungere, cambiare o ritoccare i colori dei mirini in soli 60 minuti. Migliorano notevolmente l'acquisizione del bersaglio, la concentrazione dello sparatore e aiutano a personalizzare i mirini per competizioni, caccia o difesa personale. Il rivestimento si asciuga flessibile per resistere alle scheggiature e non sbiadisce nel tempo. Ottimo per aggiungere colore ai nuovi mirini delle armi e ai perni di mira per l'arco, o per ritoccare mirini usurati o scheggiati su tutti i tipi di armi. La comoda bottiglia con applicatore ad ago consente di posizionare la quantità esatta di vernice esattamente dove si desidera - senza sprechi e senza bisogno di pennello. Agitare la bottiglia, applicare e lasciare asciugare per 1 ora. Un flacone vernicia una vita intera di mirini.
34.9EUR034,90 €
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Le vernici ad alta pigmentazione migliorano l'acquisizione del bersaglio e la concentrazione dello sparatore, ideali per competizioni, caccia o difesa personale.
Il rivestimento flessibile resiste alle scheggiature e non sbiadisce, perfetto per ritoccare mirini usurati o scheggiati su tutti i tipi di armi.
La bottiglia con applicatore ad ago consente un'applicazione precisa senza sprechi, e un flacone da ¼ oz. può verniciare una vita intera di mirini.
Caratteristiche
Colore:
Yellow
Peso della spedizione: 0,005kgAltezza di spedizione: 1mmLarghezza di spedizione: 83mmLunghezza di spedizione: 146mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 665000012 KG PRODUCTS SITE KOTE ORANGE 1/4OZ Parti Fabbricante: D1101 Le vernici ad alta pigmentazione per mirini consentono agli sparatori di mirini in ferro di aggiungere, cambiare o ritoccare i colori dei mirini in soli 60 minuti. Migliorano notevolmente l'acquisizione del bersaglio, la concentrazione dello sparatore e aiutano a personalizzare i mirini per competizioni, caccia o difesa personale. Il rivestimento si asciuga flessibile per resistere alle scheggiature e non sbiadisce nel tempo. Ottimo per aggiungere colore ai nuovi mirini delle armi e ai perni di mira per l'arco, o per ritoccare mirini usurati o scheggiati su tutti i tipi di armi. La comoda bottiglia con applicatore ad ago consente di posizionare la quantità esatta di vernice esattamente dove si desidera - senza sprechi e senza bisogno di pennello. Agitare la bottiglia, applicare e lasciare asciugare per 1 ora. Un flacone vernicia una vita intera di mirini.
35.9EUR035,90 €
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Le vernici ad alta pigmentazione per mirini migliorano l'acquisizione del bersaglio e la concentrazione dello sparatore, ideali per competizioni, caccia o difesa personale.
Il rivestimento si asciuga flessibile, resiste alle scheggiature e non sbiadisce nel tempo, garantendo una lunga durata.
La bottiglia con applicatore ad ago consente un'applicazione precisa senza sprechi; un flacone da ¼ oz. (7,4 ml) dura una vita intera di mirini.
Caratteristiche
Colore:
Orange
Peso della spedizione: 0,027kgLarghezza di spedizione: 83mmLunghezza di spedizione: 146mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 665000015 KG PRODUCTS SITE KOTE NEON GREEN 1/4OZ Parti Fabbricante: D41104 Le vernici ad alta pigmentazione per mirini consentono agli sparatori di mirini in ferro di aggiungere, cambiare o ritoccare i colori dei mirini in soli 60 minuti. Migliorano notevolmente l'acquisizione del bersaglio, la concentrazione dello sparatore e aiutano a personalizzare i mirini per competizioni, caccia o difesa personale. Il rivestimento si asciuga flessibile per resistere alle scheggiature e non sbiadisce nel tempo. Ottimo per aggiungere colore ai nuovi mirini delle armi e ai perni di mira per l'arco, o per ritoccare mirini usurati o scheggiati su tutti i tipi di armi. La comoda bottiglia con applicatore ad ago consente di posizionare la quantità esatta di vernice esattamente dove si desidera - senza sprechi e senza bisogno di pennello. Agitare la bottiglia, applicare e lasciare asciugare per 1 ora. Un flacone vernicia una vita intera di mirini.
33.9EUR033,90 €
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Change Sight Colors Instantly; Great For Touch-Up Or Changing Colors To Match Conditions
High-pigment sight paints allow the iron sight shooter to add, change or touch-up sight colors in as little as 60 minutes. Greatly improves sight acquisition, shooter focus, and helps shooters tailor their sights for competition, hunting or self defense. Coating dries flexible to resist chipping and will not fade over time. Great for adding color to new gun sights and archery sight pins, or touching up worn, or chipped sights on all types of weapons. Easy-to-use needle applicator bottle puts the exact amount of paint right where you want it – no waste and no paint brush required. Shake bottle, apply and allow 1 hour to dry. One bottle paints a lifetime of sights.
Specs: ¼ oz. (7.4 ml) needle applicator bottle. Available in Red, White, Neon Green, Neon Yellow and Safety Orange.
Altro...
Cambia i Colori dei Mirini Istantaneamente; Ideale per Ritocchi o per Cambiare i Colori in Base alle Condizioni
Le vernici ad alta pigmentazione per mirini consentono agli sparatori di mirini in ferro di aggiungere, cambiare o ritoccare i colori dei mirini in soli 60 minuti. Migliorano notevolmente l'acquisizione del bersaglio, la concentrazione dello sparatore e aiutano a personalizzare i mirini per competizioni, caccia o difesa personale. Il rivestimento si asciuga flessibile per resistere alle scheggiature e non sbiadisce nel tempo. Ottimo per aggiungere colore ai nuovi mirini delle armi e ai perni di mira per l'arco, o per ritoccare mirini usurati o scheggiati su tutti i tipi di armi. La comoda bottiglia con applicatore ad ago consente di posizionare la quantità esatta di vernice esattamente dove si desidera - senza sprechi e senza bisogno di pennello. Agitare la bottiglia, applicare e lasciare asciugare per 1 ora. Un flacone vernicia una vita intera di mirini.
Specifiche: flacone con applicatore ad ago da ¼ oz. (7,4 ml). Disponibile nei colori Rosso, Bianco, Verde Neon, Giallo Neon e Arancione Sicurezza.
Altro...
Punteggi dei clienti per KG PRODUCTS SITE KOTE NEON YELLOW 1/4OZ
Numero di punteggi: 12
Da brownells.com: 12
Punteggio medio: 3,1
hard to see(26/12/2011)
i used this on my m&p 40 it made my sights harder to see than anything it did not adhere either it wiped off while doing a wipe down of the firearm
Somewhat Lacking...(18/04/2014)
Not understanding why this is listed under "New Products" ?
Bought the green a few years ago and while it adhered to the aftermarket steel front sight on a Glock 34 the "Neon" or even just a more visible color really was no better (actually not as good) as the white paint in Novak's front sights they've been offering for years ! Also, loaned the paint to a friend without predujusting him and he had similar results. Really too bad as Photoluminescent paint on tritium pistol sight seems all the rage recently !
kg site kote green(19/08/2013)
Don't waste your money,fades out when dry, even with multiple coats.
Works Great(27/02/2012)
Wasn't sure what to do about getting easier to see sights for my Berreta Model 96. Decided to use this stuff last night, it was easy to apply and looks great. It is very bright white and should be used against black to allow to pop nicely.
Very White(07/02/2016)
One of the dots on the rear Novak sight on my 1911 fell out. I really didnât want to replace the sight so I tried some of the sight paints I already had and I also bought one of the âsetsâ sold at Brownells, both the âglow in the darkâ and standard sight paint. All were difficult to apply and typically took 24 hours to dry. One even suggested to protect the paint by applying clear fingernail polish. The truth is none of them were bright enough to see well enough except in direct sunlight. Eventually I ended up removing all the dots and was ready to purchase new front and rear sights. Then I saw the Site Kote for a very reasonable price and thought it was worth a try. Sure glad I did!
Make sure the sight is very clean. I used Brake Clean first to make sure all oil and dirt was eliminated. Then used 99% pure isopropyl alcohol just to make sure. Shake the bottle well and let sit for a few minutes to let any bubbles come to the surface. The bottle comes with a metal applicator tip and is perfect for allowing a very small drop to be applied to the recessed dots on both the front a rear sights. This stuff dries quickly and I was shooting about an hour later. After about a 2 hour session and 150 rounds later the paint was still bright white and looked like the original Novak three dot sight system. The best features about this product is that it is bright white, stays put and is easy to apply. If youâre looking for paint to glow in the dark on night sights, this is the wrong product. If youâre looking to do some touching up or change to a new color, this is what you want. Even better if youâre an Edge member and donât have to pay shipping.
Great Product(08/03/2011)
I have used this on about every gun that has an older type steel sights, . I even used it on my 1942 P 08 Luger as it can be removed without a lot of trouble. This makes old gun sights easy to see for us that are over 50. As only the front sight is painted, it will probably paint 25 guns. The applicator is like a needle so there are no brush marks made. I have had some for 1+ years and it is still good (not dried up) but a "friend" did not return it so I am ordering more.
KG SITE KOTE(19/07/2012)
Finally a good consistent easy to apply sight paint that does not run and it tough. Can be removed or touched up if needed.
Jim
has a problem(15/08/2009)
It works great at first but the paint settles and hardens in the container very fast. Shaking it won't mix it up again.
Orange Site Kote(30/08/2009)
Was able to use on only 2 sights. It dried up like some one left the cap off but it was closed.
KG PRODUCTS KG SITE KOTE 1/4 OZ., ORANGE(08/09/2009)
This may as well be labeled a single use product. It dries up in the bottle and most is wasted.
Works Great So Far...(22/11/2010)
I bought this Bright Orange Site Kote Paint to put on the Front Sights of My Marlin 39A and Henry H001T Frontier.
This Stuff has worked great for me on these 2 guns. I got it about 3 month's ago,, so we'll see if it drie's out,, but so far,, it's good. It does take a lot of shakeing though to mix it up well before applying.
However It didn't take much prep for me. I just wiped the Front Site Bead with a Dry Cotton Patch and put the paint on.
The Needle Nose Applicator make's it really easy to pinpoint accuracy as well.
It did come off once while cleaning the 39A,, but I expected that. Just put some more back on,, and the great thing about this product,, is that it only take's an hour to dry.
I'll be putting this stuff on all my Rifle's Front Sight's.
I would have given it 5 Stars,, but haven't had it long enough to see if it dries out,, like the other's have said. However I make Sure that I put the Cap Back On ASAP, YMMV, Joe
Good Product if you use it right(03/12/2016)
This product is great for us older shooters, it is really bright !
Apply one drop at a time with sight level to the Site Coat, and then spread it around with a straight pin or a toothpick.
As for those who have said it drys out and will not mix when you shake it, if the shaker ball does move around , open the top of the bottle, use a small screwdriver to mix the paint a little, then the ball should be loose, and you can shake it, and hear the ball rattle.
My first bottle lasted several years, and did MANY sights.