Soft, yet extremely rigid, polyurethane vise jaws fit comfortably in a 4" or 5" vise and are held in place by embedded magnets. Non-slip surface grips precious firearms firmly without crushing, marring, or scratching. Top lip fits the top of your vise jaws adding two inches to allow extra protection and more work area. Surface resists oils and wipes clean. Each set comes with a separate polyurethane cover for vise screws or anvils so you can be absolutely sure that no part of your guns or tools will come in contact with the vise. Channeled soft jaws have all the same features as the Standard version with the addition of machined vertical and horizontal channels with 5⁄8" radius for an improved grip on contoured parts such as barrels and actions.
Morbide, ma estremamente rigide, le ganasce in poliuretano per morsa si adattano comodamente in una morsa da 4" o 5" e sono mantenute in posizione da magneti incorporati. La superficie antiscivolo tiene fermamente le preziose armi senza schiacciarle, rovinarle o graffiarle. Il bordo superiore si adatta alla parte superiore delle ganasce della morsa, aggiungendo due pollici per consentire una protezione extra e più spazio di lavoro. La superficie resiste agli oli e si pulisce facilmente. Ogni set viene fornito con una copertura separata in poliuretano per le viti della morsa o incudini, così puoi essere assolutamente sicuro che nessuna parte delle tue armi o attrezzi verrà a contatto con la morsa. Le ganasce morbide scanalate hanno tutte le stesse caratteristiche della versione Standard con l'aggiunta di canali verticali e orizzontali lavorati con raggio di 5⁄8" per una presa migliorata su parti sagomate come canne e azioni.
Punteggi dei clienti per WAGNER INDUSTRIES INC CHANNELED SOFT JAWS
Numero di punteggi: 9
Da brownells.com: 9
Punteggio medio: 4,6
GREAT PRODUCT(30/11/2009)
These work great. I highly recommend getting the channeled set.
Best Jaws I've used(15/10/2010)
These arethe best pair of vice jaws I've ever used. The padding is firm enough to grip and hold solid a wide variety of parts but soft enough not to mar even a fine oil finish on wood. The magnets hold firm so the jaws are not constantly falling off. Excellent product.
Best out there.(13/06/2011)
These are solid enough that I leave them in the vice 90% of the time. The channel is perfect for holding a barrel and they do not mar the finish.
The only time I remove them is to use aluminum jaws for major pressure (over 200ft/lbs) on stuff.
Strong magnets, be sure to keep them clean though as metal shavings will stick to the inside.
Excellent false jaws(13/03/2012)
I purchased both the channeled and flat jaws and couldn't be happier! I use them every day, channeled more than flat, and have a set on my vise 95% of the time. I switch to smooth flat steel or wood for applying greater force or for precision holding of small parts. Other than that, I use these exclusively. The magnets hold great, not letting the jaws fall off constantly. Make sure to keep them clean when filing, etc as the magnets will attract filings on the holding surfaces. Channeled jaws are great for barrels, round actions, etc. and flat jaws are great for stocks, slab-sided receivers, slides, etc. Overall, Very satisfied. Has saved time and money not screwing up finishes or having to fuss with less friendly false jaws. Even replaced my "gun vise" for sight/scope mounting.
Great Product!(07/05/2012)
This product is amazing! The half round cutouts provide enough pressure that this can be used for mild to medium rebarreling. It has a secure grip and is built to last.
Just buy it already!(05/09/2016)
Quite possibly the best money I've ever spent!
I ordered this to assist in installing muzzle devices, to hold the barrel in place while torquing down rather than putting the force on the barrel extension, receiver or barrel extension locating pin. There are far more uses for this than I expected! Awesome accessory for any 4-5" vice!
Excellent false jaws(13/03/2012)
I purchased both the channeled and flat jaws and couldn't be happier! I use them every day, channeled more than flat, and have a set on my vise 95% of the time. I switch to smooth flat steel or wood for applying greater force or for precision holding of small parts. Other than that, I use these exclusively. The magnets hold great, not letting the jaws fall off constantly. Make sure to keep them clean when filing, etc as the magnets will attract filings on the holding surfaces. Channeled jaws are great for barrels, round actions, etc. and flat jaws are great for stocks, slab-sided receivers, slides, etc. Overall, Very satisfied. Has saved time and money not screwing up finishes or having to fuss with less friendly false jaws. Even replaced my "gun vise" for sight/scope mounting.
Great Product(10/04/2015)
These soft jaws are on my vice all the time. The magnets hold them securely in place and they don't mar the finish on a stock or metal.
Great product.
Don't waste your money(27/05/2018)
I bought four pairs for our shop...total waste of money. Buy the aluminum backed style. These jaws deserve to be in the garbage. They don't hold anything correctly. They squeeze pretty much everything they hold out or you have to adjust the piece several times. Clamp a barreled action in one? No way. They'll squirt it out. SO...that should be obvious because this same company offers a set, equally as expensive and (I own four of those also) equally worthless.
N. prodotto: 100003410 WAGNER INDUSTRIES INC CHANNELED SOFT JAWS Parti Fabbricante: WI-7090 Morbide, ma estremamente rigide, le ganasce in poliuretano per morsa si adattano comodamente in una morsa da 4" o 5" e sono mantenute in posizione da magneti incorporati. La superficie antiscivolo tiene fermamente le preziose armi senza schiacciarle, rovinarle o graffiarle. Il bordo superiore si adatta alla parte superiore delle ganasce della morsa, aggiungendo due pollici per consentire una protezione extra e più spazio di lavoro. La superficie resiste agli oli e si pulisce facilmente. Ogni set viene fornito con una copertura separata in poliuretano per le viti della morsa o incudini, così puoi essere assolutamente sicuro che nessuna parte delle tue armi o attrezzi verrà a contatto con la morsa. Le ganasce morbide scanalate hanno tutte le stesse caratteristiche della versione Standard con l'aggiunta di canali verticali e orizzontali lavorati con raggio di 5⁄8" per una presa migliorata su parti sagomate come canne e azioni.
139.9EUR16139,90 €
*
Tempi di consegna circa 12-16 giorni. Più di 10 pz. nel magazzino USA
Ganasce morbide in poliuretano con magneti incorporati per un fissaggio sicuro in morse da 4" o 5".
Superficie antiscivolo che protegge armi e attrezzi senza danneggiarli; facile da pulire e resistente agli oli.
Ganasce scanalate con canali verticali e orizzontali per una presa migliorata su parti sagomate come canne e azioni.
Caratteristiche
Peso della spedizione: 0,431kgAltezza di spedizione: 69mmLarghezza di spedizione: 74mmLunghezza di spedizione: 170mm
Operatore economico responsabile secondo il regolamento UE
Brownells
Via Mezzavilla 4
25043 Breno
Italia
service@brownells.it
N. prodotto: 100002397 WAGNER INDUSTRIES INC STANDARD SOFT JAWS Parti Fabbricante: WI7000 Morbide, ma estremamente rigide, le ganasce in poliuretano per morsa si adattano comodamente in una morsa da 4" o 5" e sono mantenute in posizione da magneti incorporati. La superficie antiscivolo tiene fermamente le preziose armi senza schiacciarle, rovinarle o graffiarle. Il bordo superiore si adatta alla parte superiore delle ganasce della morsa, aggiungendo due pollici per consentire una protezione extra e più spazio di lavoro. La superficie resiste agli oli e si pulisce facilmente. Ogni set viene fornito con una copertura separata in poliuretano per le viti della morsa o incudini, così puoi essere assolutamente sicuro che nessuna parte delle tue armi o attrezzi verrà a contatto con la morsa. Le ganasce morbide scanalate hanno tutte le stesse caratteristiche della versione Standard con l'aggiunta di canali verticali e orizzontali lavorati con raggio di 5⁄8" per una presa migliorata su parti sagomate come canne e azioni.
119.9EUR8119,90 €
*
Tempi di consegna circa 12-16 giorni. 8 pz. nel magazzino USA
Soft, yet extremely rigid, polyurethane vise jaws fit comfortably in a 4" or 5" vise and are held in place by embedded magnets. Non-slip surface grips precious firearms firmly without crushing, marring, or scratching. Top lip fits the top of your vise jaws adding two inches to allow extra protection and more work area. Surface resists oils and wipes clean. Each set comes with a separate polyurethane cover for vise screws or anvils so you can be absolutely sure that no part of your guns or tools will come in contact with the vise. Channeled soft jaws have all the same features as the Standard version with the addition of machined vertical and horizontal channels with 5⁄8" radius for an improved grip on contoured parts such as barrels and actions.
Morbide, ma estremamente rigide, le ganasce in poliuretano per morsa si adattano comodamente in una morsa da 4" o 5" e sono mantenute in posizione da magneti incorporati. La superficie antiscivolo tiene fermamente le preziose armi senza schiacciarle, rovinarle o graffiarle. Il bordo superiore si adatta alla parte superiore delle ganasce della morsa, aggiungendo due pollici per consentire una protezione extra e più spazio di lavoro. La superficie resiste agli oli e si pulisce facilmente. Ogni set viene fornito con una copertura separata in poliuretano per le viti della morsa o incudini, così puoi essere assolutamente sicuro che nessuna parte delle tue armi o attrezzi verrà a contatto con la morsa. Le ganasce morbide scanalate hanno tutte le stesse caratteristiche della versione Standard con l'aggiunta di canali verticali e orizzontali lavorati con raggio di 5⁄8" per una presa migliorata su parti sagomate come canne e azioni.
Punteggi dei clienti per WAGNER INDUSTRIES INC CHANNELED SOFT JAWS
Numero di punteggi: 9
Da brownells.com: 9
Punteggio medio: 4,6
GREAT PRODUCT(30/11/2009)
These work great. I highly recommend getting the channeled set.
Best Jaws I've used(15/10/2010)
These arethe best pair of vice jaws I've ever used. The padding is firm enough to grip and hold solid a wide variety of parts but soft enough not to mar even a fine oil finish on wood. The magnets hold firm so the jaws are not constantly falling off. Excellent product.
Best out there.(13/06/2011)
These are solid enough that I leave them in the vice 90% of the time. The channel is perfect for holding a barrel and they do not mar the finish.
The only time I remove them is to use aluminum jaws for major pressure (over 200ft/lbs) on stuff.
Strong magnets, be sure to keep them clean though as metal shavings will stick to the inside.
Excellent false jaws(13/03/2012)
I purchased both the channeled and flat jaws and couldn't be happier! I use them every day, channeled more than flat, and have a set on my vise 95% of the time. I switch to smooth flat steel or wood for applying greater force or for precision holding of small parts. Other than that, I use these exclusively. The magnets hold great, not letting the jaws fall off constantly. Make sure to keep them clean when filing, etc as the magnets will attract filings on the holding surfaces. Channeled jaws are great for barrels, round actions, etc. and flat jaws are great for stocks, slab-sided receivers, slides, etc. Overall, Very satisfied. Has saved time and money not screwing up finishes or having to fuss with less friendly false jaws. Even replaced my "gun vise" for sight/scope mounting.
Great Product!(07/05/2012)
This product is amazing! The half round cutouts provide enough pressure that this can be used for mild to medium rebarreling. It has a secure grip and is built to last.
Just buy it already!(05/09/2016)
Quite possibly the best money I've ever spent!
I ordered this to assist in installing muzzle devices, to hold the barrel in place while torquing down rather than putting the force on the barrel extension, receiver or barrel extension locating pin. There are far more uses for this than I expected! Awesome accessory for any 4-5" vice!
Excellent false jaws(13/03/2012)
I purchased both the channeled and flat jaws and couldn't be happier! I use them every day, channeled more than flat, and have a set on my vise 95% of the time. I switch to smooth flat steel or wood for applying greater force or for precision holding of small parts. Other than that, I use these exclusively. The magnets hold great, not letting the jaws fall off constantly. Make sure to keep them clean when filing, etc as the magnets will attract filings on the holding surfaces. Channeled jaws are great for barrels, round actions, etc. and flat jaws are great for stocks, slab-sided receivers, slides, etc. Overall, Very satisfied. Has saved time and money not screwing up finishes or having to fuss with less friendly false jaws. Even replaced my "gun vise" for sight/scope mounting.
Great Product(10/04/2015)
These soft jaws are on my vice all the time. The magnets hold them securely in place and they don't mar the finish on a stock or metal.
Great product.
Don't waste your money(27/05/2018)
I bought four pairs for our shop...total waste of money. Buy the aluminum backed style. These jaws deserve to be in the garbage. They don't hold anything correctly. They squeeze pretty much everything they hold out or you have to adjust the piece several times. Clamp a barreled action in one? No way. They'll squirt it out. SO...that should be obvious because this same company offers a set, equally as expensive and (I own four of those also) equally worthless.