Il Carrello è vuoto.

Carrello

Aiuto e contatti

Reso facile

Newsletter

Offerte

Oltre 300.000 clienti - vi ringraziamo!

4,93/5 "Molto buono" (1400+ recensioni)

Oltre 40.000 prodotti per caccia e sport di tiro

BROWNELLS
SHORT CHAMBERED MAUSER BARREL

050806006027 080000374

High Quality, Value Priced, Ready To Install

At last! Factory grade, ready-to-install, 4140 chrome moly barrels in popular calibers at a price that puts a custom-built sporter on a Mauser 98 action within everyone s reach. Compact, 24" length is great for fast-handling hunting rifles. Stress-relieved, button-rifled, right-hand twist barrels are short chambered, crowned, and fully threaded. All you have to do is finish chambering, set the headspace, and polish and blue the exterior.

SPECS: 4140 chrome moly steel, in-the-white. 1.1"-12tpi; V -type thread. 24" (61cm) long, 1.15" (2.9cm) diameter at breech, .57" (1.5cm) diameter at muzzle.

Altro...

Alta Qualità, Prezzo Conveniente, Pronte per l'Installazione

Finalmente! Canne in acciaio al cromo molibdeno 4140 di qualità da fabbrica, pronte per l'installazione, in calibri popolari e a un prezzo che rende accessibile a tutti la personalizzazione di un fucile sportivo su azione Mauser 98. La lunghezza compatta di 24" è perfetta per fucili da caccia maneggevoli e rapidi. Canne con rigatura a bottone, torsione a destra, stress-relieved, con camera corta, corona e completamente filettate. Tutto ciò che devi fare è completare la cameratura, impostare la distanza della testa di culatta e lucidare e bluare l'esterno.

SPECIFICHE: Acciaio al cromo molibdeno 4140, grezzo. Filettatura 1.1"-12tpi; tipo di filetto V. Lunghezza 24" (61cm), diametro alla culatta 1.15" (2.9cm), diametro alla volata .57" (1.5cm).

Altro...

Punteggi dei clienti per BROWNELLS SHORT CHAMBERED BARREL, 1-9 TWIST, 6.5X55MM

Numero di punteggi: 19
Da brownells.com: 19
Punteggio medio: 4,7

New life for my old 98 (15/01/2010)

A very good economy barrel for someone who isn't afraid to finish, polish, and install for themselves. Exterior finish is pretty coarse, don't think it will make a tack driver due to it's thin profile, but that remains to be seen. Should make a good shooter, which is what will get my old 08 receiver out of the safe and into the woods and not break the bank.

Fantastic Value (30/04/2012)

I cut this barrel down to build a handy deer rifle. I took it to the range yesterday and couldn't be more pleased. I cut and recrowned this barrel down to 18.5" and installed a williams fire light front sight and receiver mounted rear peep. After about 20 rounds of break in/ cleaning and testing I began shooting 1.5" groups at 100yrds. I had no walking or stringing with warm up and this was all with some unknown 1989 issue military ammo. I shot 20 quick succession rounds and tore a 1.5" hole without even one flier. The finish is rough but I cleaned it up with an orbital sander and hand sanding to a nice mirror polish fairly quickly. I used my borescope to inspect the rifling and found it to be better than most factory barrels with nicely cut lands and grooves. Chamber was cut perfectly centered and required finish reaming to obtain proper headspace. I was going to build this rifle up to sell but now I think it may be sticking around for a while because I just found my new favorite shooter.

allways use these barrels (27/01/2010)

I use these barrels 25/06 30/06 95 precent of the time building 98 mauser coustom sporters i can find nothing wrong with them, polish,and blue,really good,both hot an cold, but the proof is in the pudding,eight guns 6 will shoot 1inch
NOA.2 less than 3/4inchMOA
at 100yards.
Not bragging just facts

Great barrels (09/05/2010)

I removed the thread and rethreaded and rechambered it for a M-70 push feed.

It shoots just about an inch with the first load I tried.....Ballistic tips 100 grain.

I sent it out for bluing but very happy with the performance.

What a fit. (25/07/2010)

I like the looks of the 25-06 barrel.There was very little to fit,the threads were a perfect
fit, the head space work was a breeze with finish
reamer and head space guages I also purchased at
Brownells. My sons and I built the stock to combine the Military with a thumb hole stock
made of Mahogany. With high scope mounts and a 4-12 x 40mm Bushnell scope this is deadly hunting combination. This is a nail driver, the only
bad thing about this new rifle I don't like, is
I have to put it down to go to work. Thanks
Brownells.

If you want to drive tacks at 100yds. (26/10/2011)

Target shooting and hunting. Dead on acuracy, perfect fit to action, looks like it was built to be in the stock stile I designed.The only not so hot thing I can find with this barrel is I can't shoot as much as I want to, I don't have enough time.

Great barrel (10/12/2012)

No faults with these barrels,I have shortened two of the 25/06 barrels and rechambered to 250 Savage and fit them to my single shot actions,Makes a great hunting gun shooting under one inch groups at hundred yards.Blues great and shoots as good as more costly barrels,Thanks for a great product.

Excellent. (30/03/2018)

was Sceptical if these would be any good. I had a commercial Mauser FN that was 25-06 and couldnt get it to group better than 1 1/2â so I bought this barrel and sat on it for about a year till the end of the next deer season. Man once I had the barrel out on the first load I tried 120 gr Speer gs 47 gr imr4350 was stacking one right after another. Left a jagged hole for a 5 shot group. Absolute great product for what you pay.

<img width="500" src='/userdocs/reviewimages/c447ce8c-23ac-49ec-af2c-891b39fb8ee8.jpg' alt=''>

You get what you pay for. (26/12/2016)

Center axis of bore was not concentric with secondary machine work. Threads and chamber were concentric but off center of the bore by about .0012" . All axes were parallel. Barrel shoots a nice round 2" five shot group at 100 yards in blue printed Mauser action, not too bad for hunting large game. Spend more money if you want a target barrel.

Good for the price (23/01/2017)

Barrel was installed on Belgian 98 action, shortened to 21" with a 11 degree crown, had light visible chatter in bore but after lapping and break in shoots just over 1 moa. Took on a plains game Safari in SA and shot great! Would have rated 5 stars, but shouldn't have to mitigate chatter in a barrel, granted it shoots well and cleans easily after some elbow grease.

I would but this barrel again (01/01/2010)

This is my first time building a rifle and the barrel fit the 98K receiver perfect, the short chamber was reamed by a finishing reamer from Brownells and it all worked out OK. I am in the process of assembling the rifle for test firing before finish is applied. I will update the results when completed

nice barrel (25/02/2011)

i was very impressed when i unwrapped the barrel and was very happy to find such a smooth bore, i've shot 3 groups thus far for break in purposes and i am really impressed at how easily the bore cleans up and how little jacket fouling i'm finding at this point. i haven't shot for groups yet as it's been below zero since i finished this up but i expect good things. blued beautifully too!

good shooter! (22/03/2011)

this is a follow up review as i have had time to shoot the rifle a bit more and am very happy with the accuracy of the barrel. i have only shot 100gr hornady's with 760 (thrown together for the sake of barrel break in, no load work involved) and it is giving 1" groups off a bulls bag. cleans nice and easy, doesn't copper foul much at all... very nice! i would definately buy again.

Great Buy (21/11/2011)

Bought this barrel for a VZ24 mauser project. bore and chamber was better than I expected and it shoots Sierra 140sbt into 1/2 inch holes at 100yds. For the money you can't go wrong.

Great Buy (04/12/2011)

Bought this barrel for a VZ24 action and it worked out great, shoots 140gr. sierra bullets with 1/2" groups at 100yds. For the money you can't go wrong

Accurate barrel (05/05/2013)

Chambered mine with a rented PTG reamer. Shoulder to breech face distance timed perfectly to my VZ-24. First shots came out under MOA with basic hand loads (140 Sierra MKs with RE22). Very satisfied with it.

"Shoe-shined" the barrel with 320 and 400 grit metal sandpaper to prep for blueing. Used Birchwood Casey paste Perma Blue and it took a nice deep color.

Only reason I gave it a 4 and not 5 stars is I would have liked the contour lighter. It could have been thinner towards the action end and saved a bunch of weight without being a whippy featherweight contour.

excellent value barrel (01/03/2016)

My first experience rebarreling to a 6.5x55. I' glad I went with the 24" from Brownells as others had short chambered ones for sale but all shorter versions. The chambering job with Brownells reamer went smooth, also a great value. At the range the thing shot like a dream with less than moa groups with Barnes 120gr bullets. Have'nt tried other bullet weights but "very" pleased with what I'm seeing so far. The barrel doesn't load up with copper either as some do with Barnes bullets. Excellent barrel that I would order again.

updated review (20/06/2016)

Just an update on my barrel performance: The barrel shoots tight little 1/2" groups with Barnes 100gr and 120gr TTSX bullets and does not copper foul at all. I'm also running max loads with IMR 4831 with no pressure signs on a hot day. Did I say I'm pleased, I'm very pleased! I'm eyeing over another mauser to do the same thing to, as this makes them into a sweet shooting long ranger killing machine. Did I say I'm pleased?

Barrel # 2 (13/10/2016)

This is the second one of these that I have installed. This one I used on a 96 Swede action by turning the thread blank down and re-threading to fit the 96. The whole project success depends on how the thing shoots when done. This barrel did not disappoint! The groups with 100gr Barnes TTSX bullets were consistantly less than 3/4" at100yds and showing signs of better accuracy with more break in shooting. I am very pleased again.

Leggi più recensioni su brownells.com

279.9 279.9 4 EUR

N. prodotto: 080000374
BROWNELLS SHORT CHAMBERED BARREL, 1-9 TWIST, 6.5X55MM
Parti Fabbricante: NONE 050806006027 Finalmente! Canne in acciaio al cromo molibdeno 4140 di qualità da fabbrica, pronte per l'installazione, in calibri popolari e a un prezzo che rende accessibile a tutti la personalizzazione di un fucile sportivo su azione Mauser 98. La lunghezza compatta di 24" è perfetta per fucili da caccia maneggevoli e rapidi. Canne con rigatura a bottone, torsione a destra, stress-relieved, con camera corta, corona e completamente filettate. Tutto ciò che devi fare è completare la cameratura, impostare la distanza della testa di culatta e lucidare e bluare l'esterno.

279.9 EUR 35 279,90 € *

È un Contattateci per ordinare

Prezzo e disponibilità su richiesta. Per l'acquisto contattaci.

Caratteristiche: Adatto per: Mauser Cartuccia: 6.5 x 55 mm Swedish Mauser Finitura: Semilavorata Lunghezza: 24'' Modello: 98 Peso della canna: 2.8 lbs Profilo: Facary Rotazione: 1-9

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Restrizioni

È un Contattateci per ordinare

Top takeaways

Canne in acciaio al cromo molibdeno 4140 di qualità fabbrica, pronte per l'installazione su fucili Mauser 98.
Lunghezza compatta di 24", perfetta per fucili da caccia maneggevoli e rapidi, con rigatura a bottone e torsione a destra.
Richiede completamento della cameratura, impostazione della distanza della testa di culatta, lucidatura e bluitura dell'esterno.

Caratteristiche

Adatto per: Mauser Cartuccia: 6.5 x 55 mm Swedish Mauser Finitura: Semilavorata Lunghezza: 24'' Modello: 98 Peso della canna: 2.8 lbs Profilo: Facary Rotazione: 1-9 Peso della spedizione: 1,315kg Altezza di spedizione: 25mm Larghezza di spedizione: 25mm Lunghezza di spedizione: 660mm UPC : 050806006027

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.c

N. prodotto: 080000378
BROWNELLS SHORT CHAMBERED BARREL, 1-10 TWIST, .30-06
Parti Fabbricante: NONE 050806006058 Finalmente! Canne in acciaio al cromo molibdeno 4140 di qualità da fabbrica, pronte per l'installazione, in calibri popolari e a un prezzo che rende accessibile a tutti la personalizzazione di un fucile sportivo su azione Mauser 98. La lunghezza compatta di 24" è perfetta per fucili da caccia maneggevoli e rapidi. Canne con rigatura a bottone, torsione a destra, stress-relieved, con camera corta, corona e completamente filettate. Tutto ciò che devi fare è completare la cameratura, impostare la distanza della testa di culatta e lucidare e bluare l'esterno.

279.9 EUR 28 279,90 € *

È un Contattateci per ordinare

Prezzo e disponibilità su richiesta. Per l'acquisto contattaci.

Caratteristiche: Adatto per: Mauser Cartuccia: 30-06 Springfield Finitura: Semilavorata Lunghezza: 24'' Modello: 98 Peso della canna: 2.71 lbs Profilo: Facary Rotazione: 1-10

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

N. prodotto: 080000377
BROWNELLS SHORT CHAMBERED BARREL, 1-10 TWIST, .25-06 REM.
Parti Fabbricante: NONE 050806006041 Finalmente! Canne in acciaio al cromo molibdeno 4140 di qualità da fabbrica, pronte per l'installazione, in calibri popolari e a un prezzo che rende accessibile a tutti la personalizzazione di un fucile sportivo su azione Mauser 98. La lunghezza compatta di 24" è perfetta per fucili da caccia maneggevoli e rapidi. Canne con rigatura a bottone, torsione a destra, stress-relieved, con camera corta, corona e completamente filettate. Tutto ciò che devi fare è completare la cameratura, impostare la distanza della testa di culatta e lucidare e bluare l'esterno.

279.9 EUR 32 279,90 € *

È un Contattateci per ordinare

Prezzo e disponibilità su richiesta. Per l'acquisto contattaci.

Caratteristiche: Adatto per: Mauser Cartuccia: 25-06 Remington Finitura: Semilavorata Lunghezza: 24'' Modello: 98 Peso della canna: 2.925 lbs Profilo: Facary Rotazione: 1-10

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

N. prodotto: 080000376
BROWNELLS SHORT CHAMBERED BARREL, 1-10 TWIST, .308 WIN.
Parti Fabbricante: NONE 050806006034 Finalmente! Canne in acciaio al cromo molibdeno 4140 di qualità da fabbrica, pronte per l'installazione, in calibri popolari e a un prezzo che rende accessibile a tutti la personalizzazione di un fucile sportivo su azione Mauser 98. La lunghezza compatta di 24" è perfetta per fucili da caccia maneggevoli e rapidi. Canne con rigatura a bottone, torsione a destra, stress-relieved, con camera corta, corona e completamente filettate. Tutto ciò che devi fare è completare la cameratura, impostare la distanza della testa di culatta e lucidare e bluare l'esterno.

279.9 EUR 51 279,90 € *

È un Contattateci per ordinare

Prezzo e disponibilità su richiesta. Per l'acquisto contattaci.

Caratteristiche: Adatto per: Mauser Cartuccia: 308 Winchester Finitura: Semilavorata Lunghezza: 24'' Modello: 98 Peso della canna: 2.74 lbs Profilo: Facary Rotazione: 1-10

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Scopri la canna Mauser 6.5x55mm di BROWNELLS! 🔥 Ideale per fucili sportivi, 24'' di lunghezza e rigatura a 1-9 per prestazioni ottimali.

High Quality, Value Priced, Ready To Install

SPECS: 4140 chrome moly steel, in-the-white. 1.1"-12tpi; V -type thread. 24" (61cm) long, 1.15" (2.9cm) diameter at breech, .57" (1.5cm) diameter at muzzle.

Altro...

Alta Qualità, Prezzo Conveniente, Pronte per l'Installazione

SPECIFICHE: Acciaio al cromo molibdeno 4140, grezzo. Filettatura 1.1"-12tpi; tipo di filetto V. Lunghezza 24" (61cm), diametro alla culatta 1.15" (2.9cm), diametro alla volata .57" (1.5cm).

Altro...

Punteggi dei clienti per BROWNELLS SHORT CHAMBERED BARREL, 1-9 TWIST, 6.5X55MM

Numero di punteggi: 19
Da brownells.com: 19
Punteggio medio: 4,7

New life for my old 98 (15/01/2010)

Fantastic Value (30/04/2012)

allways use these barrels (27/01/2010)

Great barrels (09/05/2010)

What a fit. (25/07/2010)

If you want to drive tacks at 100yds. (26/10/2011)

Great barrel (10/12/2012)

Excellent. (30/03/2018)

You get what you pay for. (26/12/2016)

Good for the price (23/01/2017)

I would but this barrel again (01/01/2010)

nice barrel (25/02/2011)

good shooter! (22/03/2011)

Great Buy (21/11/2011)

Bought this barrel for a VZ24 mauser project. bore and chamber was better than I expected and it shoots Sierra 140sbt into 1/2 inch holes at 100yds. For the money you can't go wrong.

Great Buy (04/12/2011)

Bought this barrel for a VZ24 action and it worked out great, shoots 140gr. sierra bullets with 1/2" groups at 100yds. For the money you can't go wrong

Accurate barrel (05/05/2013)

excellent value barrel (01/03/2016)

updated review (20/06/2016)

Barrel # 2 (13/10/2016)

Leggi più recensioni su brownells.com

BROWNELLS
SHORT CHAMBERED MAUSER BARREL

Punteggi dei clienti per BROWNELLS SHORT CHAMBERED BARREL, 1-9 TWIST, 6.5X55MM

Restrizioni

Top takeaways

Caratteristiche

Dettagli dell'elemento

Punteggi dei clienti per BROWNELLS SHORT CHAMBERED BARREL, 1-9 TWIST, 6.5X55MM

Collegare

Metodi di pagamento sicuri

Associazioni di categoria

Benvenuti!

BROWNELLS SHORT CHAMBERED MAUSER BARREL

Punteggi dei clienti per BROWNELLS SHORT CHAMBERED BARREL, 1-9 TWIST, 6.5X55MM

Restrizioni

Top takeaways

Caratteristiche

Dettagli dell'elemento

Punteggi dei clienti per BROWNELLS SHORT CHAMBERED BARREL, 1-9 TWIST, 6.5X55MM

Collegare

Metodi di pagamento sicuri

Associazioni di categoria

Benvenuti!

BROWNELLS
SHORT CHAMBERED MAUSER BARREL